Translation(s): Français - Italiano - ?繁體中文
Broadcom BCM4313, BCM43224, BCM43225 (brcmsmac, brcm80211)
This page describes how to enable support for WiFi devices based on Broadcom BCM4313, BCM43224, BCM43225 chips on Debian systems.
Contents
brcmsmac (brcm80211 prior to Linux 2.6.39) is a free and open source mac80211 driver, introduced in Linux 2.6.37.1
It supports wireless LAN devices based on specific Broadcom 802.11n PCIe wireless LAN chips. Supported devices are listed at the end of this page.
Non-free firmware is required, which can be provided by installing the firmware-brcm80211 package.
For support of other Broadcom PCI wireless LAN chipsets, see bcm43xx.
Installation
Add a "non-free" component to /etc/apt/sources.list, for example:
# Debian 8 "Jessie" deb http://httpredir.debian.org/debian/ jessie main contrib non-free
Update the list of available packages and install the firmware-brcm80211 package:
# apt-get update && apt-get install firmware-brcm80211
As the driver may already be loaded, reinsert the module to access installed firmware:
# modprobe -r brcmsmac ; modprobe brcmsmac
Configure your wireless interface as appropriate.
Known Issues
- With BCM4313-based devices, brcmsmac driver information may be displayed even after system boot.
You can ignore/hide this by adding a "dmesg -n 3" line to your /etc/rc.local file.
You may have problems when using other channels than 1-12. It is important you configure your regulatory domain with:
# iw reg set <EU|US|JP>
Supported Devices
The page HowToIdentifyADevice/PCI explains how to identify a PCI device.
- Broadcom BCM4313 (PCI ID 14e4:4727)
- Broadcom BCM43224 (PCI IDs 14e4:0576, 14e4:4353)
- Broadcom BCM43225 (PCI ID 14e4:4357)
See Also