Differences between revisions 1 and 2
Revision 1 as of 2014-02-18 11:35:54
Size: 1289
Editor: warmsun0220
Comment:
Revision 2 as of 2014-02-18 11:38:26
Size: 1252
Editor: warmsun0220
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
~-[[DebianWiki/EditorGuide#translation|Translation(s)]]: [[/NvidiaGraphicsDrivers/Configuration|English]] - [[es/NvidiaGraphicsDrivers/Configuration|Español]]- 简体中文 - ~ ~-[[DebianWiki/EditorGuide#translation|Translation(s)]]: [[en/NvidiaGraphicsDrivers/Configuration|English]] - [[es/NvidiaGraphicsDrivers/Configuration|Español]]- 简体中文 - ~
Line 7: Line 7:
This page describes additional configuration and settings relating to the [[NvidiaGraphicsDrivers|NVIDIA proprietary display driver]]. 本页面描述了与 [[NvidiaGraphicsDrivers|NVIDIA proprietary display driver]] 有关的额外的配置和设置。
Line 9: Line 9:
== Performance == == 性能==
Line 11: Line 11:
The driver options below can be included for increased performance: 驱动可以包含以下选项来提高性能:
Line 38: Line 38:
== See Also == == 另请参阅 ==

Translation(s): ?English - Español- 简体中文 - ~


= 英伟达专有驱动程序: 配置=

本页面描述了与 NVIDIA proprietary display driver 有关的额外的配置和设置。

== 性能==

驱动可以包含以下选项来提高性能:

/etc/X11/xorg.conf.d/20-nvidia.conf

  • Section "Device"
            Identifier "My GPU"
            Driver "nvidia"
            Option "NoLogo" "1"
            Option "RenderAccel" "1"
            Option "TripleBuffer" "true"
            Option "MigrationHeuristic" "greedy"
    EndSection

Iceweasel / Icedove

Use the following commands to determine the current values of InitialPixmapPlacement and GlyphCache:

$ nvidia-settings -q InitialPixmapPlacement
$ nvidia-settings -q GlyphCache

If different values are reported, these commands can be added to ~/.xsession for improving application performance:

nvidia-settings -a InitialPixmapPlacement=2
nvidia-setttings -a GlyphCache=1

另请参阅


CategoryProprietarySoftware