Differences between revisions 260 and 263 (spanning 3 versions)
Revision 260 as of 2016-12-31 18:10:58
Size: 12425
Editor: MichaelBiebl
Comment:
Revision 263 as of 2017-04-20 20:26:55
Size: 13599
Editor: TheAnarcat
Comment: document my weird shit with systemd leftovers
Deletions are marked like this. Additions are marked like this.
Line 175: Line 175:
 * [[https://github.com/systemd/systemd/issues|Check upstream issue tracker]]  * [[https://github.com/systemd/systemd/issues|Upstream issue tracker]]
 * [[https://bugs.debian.org/src:systemd|Debian bug tracker]]
Line 268: Line 269:

=== orphaned processes ===

Because it manages user sessions (taking over the role of X or other components), systemd may slightly change how processes survive a logoff. By default, when X shuts down all processes should exit and systemd will clean up the session, but there are some corner cases where certain processes don't cleanup after themselves properly.

You can configure how systemd manages leftover processes with the `KillUserProcesses=` parameter in [[DebianMan:logind.conf]]. By setting this to `yes`, processes will be forcibly killed when the session terminates. Note that this will break tools like DebianMan:screen or DebianMan:tmux, unless they are configured to run under a distinct `user@.service` unit and if `enable-linger` is set to `yes` in DebianMan:loginctl.

A good way to list the affected processes is to group them by "control group", with the DebianMan:systemd-cgls command:

{{{
systemd-cgls
}}}

Some known misbehaving applications:

 * DebianPackage:parcimonie - DebianBug:849016
 * DebianPackage:redshift (or DebianPackage:redshift-gtk?)
 * DebianPackage:xplanet
Line 312: Line 331:
 * [[http://0pointer.net/public/systemd-nluug-2014.pdf|slides]] and [[http://ftp.nluug.nl/video/nluug/2014-11-20_nj14/zaal-2/5_Lennart_Poettering_-_Systemd.webm|video]] about simple security features that can be enabled in service files]]  * [[http://0pointer.net/public/systemd-nluug-2014.pdf|slides]] and [[http://ftp.nluug.nl/video/nluug/2014-11-20_nj14/zaal-2/5_Lennart_Poettering_-_Systemd.webm|video]] about simple security features that can be enabled in service files

Translation(s): English - Español - Français - Russian


systemd - system and service manager

Introduction

systemd is a system and service manager for Linux. systemd is compatible with SysV and LSB init scripts. It can work as a drop-in replacement for sysvinit. Systemd

  • Provides aggressive parallelization capabilities
  • Uses socket and D-Bus activation for starting services
  • Offers on-demand starting of daemons
  • Implements transactional dependency-based service control logic
  • Tracks processes using Linux cgroups
  • Supports snapshotting and restoring
  • Maintains mount and automount points

Please see the upstream page for more information.

Installing and Testing

systemd was included in Debian wheezy as a technology preview. Please make sure that you are using Debian jessie or newer to get a recent version of systemd.

Installation

To install systemd run:

# apt-get update
# apt-get install systemd

This will install the systemd packages but will not configure systemd as your init system.

Configuring for testing

To test systemd before switching to it by default, you can add the following boot parameter to the kernel:

init=/bin/systemd

This can be done in the grub menu for a single boot - press "e" in the grub menu and add this to the kernel line. For example, depending on the options required for your particular system, it might look something like:

linux   /vmlinuz-3.13-1-amd64 root=/dev/mapper/root-root init=/bin/systemd ro quiet

If PID 1 is systemd then your system is running with systemd.

Configuring as default

In order to use systemd you should also install systemd-sysv which provides the symlinks links for /sbin/init. It is recommended to run this when already running under systemd, as described in the previous section.

# apt-get install systemd-sysv

In order to boot your system with the newly installed systemd, simply reboot.

# reboot

If you run a self-compiled kernel, make sure you have 2.6.39 or newer and enable the following options:

 * CONFIG_DEVTMPFS=y
 * CONFIG_CGROUPS=y
 * CONFIG_AUTOFS4_FS=[y|m]
 * CONFIG_IPV6=[y|m], optional, but highly recommended
 * CONFIG_FANOTIFY=y, optional, required for systemd readahead. available in Linux kernel >= 2.6.37.

For an up-to-date list, see section "REQUIREMENTS" in the upstream README file.

Managing services with systemd

systemctl is the main tool used to introspect and control the state of the "systemd" system and service manager. You can use systemctl for instance to enable/disable services permanently or only for the current session. Refer to the systemctl(1) manpage for more details.

Some basic use examples

List all running services:

$ systemctl

Activates the service "example1" immediately:

# systemctl start example1

Deactivates the service "example1" immediately:

# systemctl stop example1

Restarts the service "example1" immediately:

# systemctl restart example1

Shows status of the service "example1":

# systemctl status example1

Enables "example1" to be started on bootup:

# systemctl enable example1

Disables "example1" to not start during bootup:

# systemctl disable example1

Debugging

Sometimes it is necessary to investigate why systemd hangs on startup or on reboot/shutdown.

Solution #0: Remove "quiet" from Kernel command line (so called "cmdline" or "grub line")

Solution #1: Increase verbosity via cmdline: Add "systemd.log_target=kmsg systemd.log_level=debug"

Of course you can have a "temporary" persistent solution:

[ /etc/default/grub ]
GRUB_CMDLINE_LINUX="systemd.log_target=kmsg systemd.log_level=debug" <--- Add here (by uncommenting you can easily switch to debug)

# update-grub

Solution #2: Increase verbosity via /etc/systemd/system.conf

LogLevel=debug           <--- Uncomment this line and use "debug" (default: commented and "info")
LogTarget=syslog-or-kmsg <--- Uncomment this line (default: commented)

Solution #3: Boot an emergency shell: Add systemd.unit=rescue.target or just 1 (the number one) to the kernel command line.

Solution #4: Enable the debug shell: Run systemctl enable debug-shell.service. (You can do this in a chroot environment after booting a rescue system.) This starts a root shell on TTY 9.

HINT: "man systemd" and "man systemd-system.conf"

HINT: Extensive debugging information about systemd is on this FreeDesktop page.

HINT: How to check Kernel command line parameters/options?

# cat /proc/cmdline

NOTE on LogLevel (see systemd(1) and systemd-system.conf(5)):

"Set log level. As argument this accepts a numerical log level or the well-known syslog(3) symbolic names (lowercase): emerg, alert, crit, err, warning, notice, info, debug."

HINT: Keep a copy of /sbin/init from sysvinit package in case of rescue (so you can use init=/sbin/init.sysvinit in cmdline)!

# cp -av /sbin/init /sbin/init.sysvinit <--- Before installing systemd-sysv package

See also http://fedoraproject.org/wiki/How_to_debug_Systemd_problems

Kernel debug without systemd debug in Jessie

Using the old "debug" kernel parameter in Jessie will turn on systemd debug logging as well as kernel debug logging. To get the old behaviour, do not use "debug", instead use the kernel parameter "loglevel=7".

Bugs and Bug-Tracking-Systems

Known Issues and Workarounds

sysvinit vs. systemd-sysv

Upgrade to sysvinit ≥ 2.88dsf-44.

Encrypted swap blocks boot

See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712439#70 for a patch.

According to the bug, the patch is no longer required as long as you upgrade to dmsetup 2:1.02.83-1.

Booting with lvm (especially with separate /usr) fails

Upgrade to lvm2 ≥ 2.02.104-1

Shared bind mounts

The default behavior of bind mounts changes under systemd. The Linux kernel makes bind mounts of anything below / PRIVATE. Systemd changes this to SHARED.

Thus, when you do this:

    mount --bind / $CHROOT
    mount --bind /dev/ $CHROOT/dev
    umount $CHROOT/dev

then /dev will be unmounted in your base/parent system as well!

What you can do now instead, to is to:

    mount --bind --make-rslave / $CHROOT
    mount --bind --make-rslave /dev/ $CHROOT/dev

this will propagate mount changes (also mount options) in the base/parent system into the $CHROOT but not from the $CHROOT back to the parent.

The rationale for the change of the default behavior can be found in bug 739593, in particularily in Lenart's comment therein.

SSH session doesn't cleanly terminate on reboot/shutdown

If you happen to reboot/shutdown remote machine over ssh you may find out that your session isn't terminated properly, leaving you with the non-reacting terminal until long timeout is over. There is a bug 751636 about it. At the moment the work around this problem is to install:

    apt-get install libpam-systemd

which will terminate ssh session before the network is dropped. Please note, that that would require PAM to be enabled in sshd.

Missing startup messages on console(tty1) after the boot

With systemd console(tty1) is handled differently and if you used to check it to see how did your boot go now you'll see only couple of non-informative lines.

To be able to get full transcript of the system boot on your console you need to perform two steps.

1. Add to the kernel options systemd.show_status=1, for example via /etc/default/grub:

    GRUB_CMDLINE_LINUX_DEFAULT="quiet systemd.show_status=1"

and run update-grub2.

2. Create file /etc/systemd/system/getty@tty1.service.d/noclear.conf with the content:

[Service]
TTYVTDisallocate=no

to disable clearing of the terminal on getty invocation.

Virtual and serial console changes

Those used to change inittab to enable/disable virtual or serial consoles will notice that that file is gone from clean installs. This is all managed through systemd directly now. For example, you can enable a serial console on COM1 with:

systemctl enable serial-getty@ttyS0.service
systemctl start serial-getty@ttyS0.service

However, it is generally preferable to add console=ttyS0 on the kernel commandline, since this also enables kernel output on reboots. This is though by adding the following to /etc/default/grub:

GRUB_CMDLINE_LINUX="console=ttyS0"

... and running update-grub. This will take effect only on the next reboot, however.

orphaned processes

Because it manages user sessions (taking over the role of X or other components), systemd may slightly change how processes survive a logoff. By default, when X shuts down all processes should exit and systemd will clean up the session, but there are some corner cases where certain processes don't cleanup after themselves properly.

You can configure how systemd manages leftover processes with the KillUserProcesses= parameter in logind.conf. By setting this to yes, processes will be forcibly killed when the session terminates. Note that this will break tools like screen or tmux, unless they are configured to run under a distinct user@.service unit and if enable-linger is set to yes in loginctl.

A good way to list the affected processes is to group them by "control group", with the systemd-cgls command:

systemd-cgls

Some known misbehaving applications:

Where to get help?

Systemd is a young project with a strong emphasis on solving problems in a distribution agnostic manner.

Debian specific channels include

Several other distributions are using systemd

Installing without systemd

Jessie installs systemd by default on new installs. Should one desire to install without systemd, i.e use sysvinit-core instead (old sysV5 init), it is possible to use preseed to replace systemd with sysvinit at the end of the install (This probably won't work if selecting one of the desktop environments that require systemd specific features however). If using a preseed file already, just make sure to set the preseed value

preseed/late_command="in-target apt-get install -y sysvinit-core"

If not using a preseed file, this can be added to the boot arguments instead by hitting TAB at the boot menu on the desired entry and appending the above preseed line at the end of the boot command.

There may still be a few bits of systemd installed, but at least init itself is not systemd and cleaning up any remaining pieces should not be too hard.

Debian Resources

Other Resources


CategoryPermalink