Translation(s): العربية - English - Español - Français - Italiano - Русский
Root > sudo
Sudo (sometimes considered as short for Super-user do) is a program designed to let system administrators allow some users to execute some commands as root (or another user). The basic philosophy is to give as few privileges as possible but still allow people to get their work done. Sudo is also an effective way to log who ran which command and when.
Some new Debian users, usually coming from Ubuntu, are shocked by problems like "sudo not working in Debian". However, this situation only happens if you have set a root password during your Debian installation.
If you like sudo and you want to install it (even if you skipped it during your Debian installation), you can, but in the way without sudo, so, becoming root with the su command, installing it, and adding yourself in the sudo group and doing a full logout/login.
$ su - Password: (enter here the password of the root user that you specified during your Debian installation, and press Enter) # apt install sudo # adduser jhon-smith sudo
(Obviously just replace "jhon-smith" with your personal username)
Then please do a full logout and login again.
Note that, historically, all Unix-like systems worked perfectly even before "sudo" was invented. Moreover, having a system without sudo could still give security benefits, since the sudo package could be affected by security bugs, as any additional part of the system.
Lot of Debian users do not install sudo. Instead, they open a terminal as root (for example with su - from a normal user). So you do not have to put "sudo" in front of any command.
Using sudo could be more familiar to newer users, and it could be better (safer) than allowing a normal user to open a session as root. Some reasons:
Nobody needs to know the root password (sudo prompts for the current user's password). Extra privileges can be granted to individual users temporarily, and then taken away without the need for a password change.
It's easy to run only the commands that require special privileges via sudo; the rest of the time, you work as an unprivileged user, which reduces the damage that mistakes can cause.
For the reasons above, switching to root using sudo -i (or sudo su) is usually deprecated because it cancels most of the above features.
Debian's default configuration allows users in the sudo group to run any command via sudo.
Once logged in as a user, you can verify whether or not the user belongs to group=sudo using either the id or groups commands. E.g., a user with id=foo should see output from
If sudo is not present in the output, the user does not belong to that group. Similarly, the more complex and variable output from command=id should look something like
uid=1001(foo) gid=1001(foo) groups=1001(foo),27(sudo)
To add an existing user with id=foo to group=sudo:
$ sudo adduser foo sudo
Alternatively, you can first get root (e.g., sudo su -) and then run the same commands without prefix=sudo:
# adduser foo # adduser foo sudo
After being added to a new group the user must log out and then log back in again for the new group to take effect. Groups are only assigned to users at login time. A most common source of confusion is that people add themselves to a new group but then do not log out and back in again and then have problems because the group is not assigned; be sure to verify group membership.
You can also create new users with sudo membership:
As of DebianSqueeze, if you give root an empty password during installation, sudo will be installed and the first user will be able to use it to gain root access (currently, the user will be added to the sudo group). The system will also configure gksu and aptitude to use sudo. You should still verify group membership after logging in as the installed user.
A user which already has sudo can create another user (example id=foo) with sudo group membership from the commandline:
$ sudo adduser foo -G sudo
(or first get root as in previous section). You should then login as the new user and verify group membership.
Now, if you want to allow certain users to execute certain programs, here's a quick example (for more information, read the fine manual), which you can put in a file in /etc/sudoers.d, probably using visudo -f /etc/sudoers.d/myfile.
User_Alias MYADMINS = jdoe
Cmnd_Alias SHUTDOWN = /sbin/reboot, /sbin/poweroff
Cmnd_Alias PKGMGMT = /usr/bin/dpkg, /usr/bin/apt-get, /usr/bin/aptitude
# Users listed above (MYADMINS) can run package managers and reboot the system.
MYADMINS ALL = PKGMGMT, SHUTDOWN
A typical session goes like this:
$ sudo test We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. [sudo] password for jdoe: Sorry, user jdoe is not allowed to execute '/usr/bin/test' as root on localhost.
This message means what it says: the user you're running as isn't allowed to execute the given command on the given machine. One confusing possible reason for this is that the administrator has just added user jdoe to a privileged group - but you're still using the old login, which doesn't have that new group information, and therefore has no new sudo-ing rights. People in this situation are usually advised to log out completely and back in again, though you can sometimes get away with just performing a "re-login on the spot" with su - $USER or changing group with newgrp sudo.
The standard /etc/sudoers ends with a line:
This makes it possible for other packages to provide snippets in /etc/sudoers.d/<packagename> which modify the configuration of sudo. It may look as if it needs to be edited to take out the leading numbersign (a.k.a. "hash" or "pound"), but no, the '#' is part of the directive!
It is recommended that you make local changes in a snippet as well.
Yes, the file /etc/sudoers is intentionally set read-only, even for root!
The explanation is that it was set up this way to motivate admins to only ever edit it via the command visudo, which provides additional checking before leaving the new file in place. You might think that the fix for a mangled /etc/sudoers, the fix may be as simple as su -c visudo, but sudo is often used in a place where simply su'ing to root is not possible since you simply don't know the root password.
Beware, most text editors will let you edit the file without complaining about the read-only bit, so you might not automatically get this additional protection.
If you want to require the root password for use of sudo, rather than the user password, add the line:
If you want sudo group members to execute commands without password, add the line:
%sudo ALL=(ALL) NOPASSWD: ALL
As default, after asking a password, your credentials are cached by sudo and last for 15 minutes. You can change this behavior using the command visudo and customizing the timeout for a specific user:
Doas - A lighter and more minimalistic tool for the same purpose, with simpler configuration.
CategoryRoot | CategorySystemSecurity | CategorySystemAdministration