Differences between revisions 11 and 12
Revision 11 as of 2013-08-25 14:54:25
Size: 3180
Editor: GeoffSimmons
Comment: Amend for Wheezy release.
Revision 12 as of 2015-12-10 16:42:05
Size: 3190
Editor: BenHutchings
Comment: Refer to official httpredir.debian.org instead of http.debian.net
Deletions are marked like this. Additions are marked like this.
Line 26: Line 26:
deb http://http.debian.net/debian/ wheezy main contrib non-free deb http://httpredir.debian.org/debian/ wheezy main contrib non-free
Line 37: Line 37:
deb http://http.debian.net/debian/ squeeze main contrib non-free deb http://httpredir.debian.org/debian/ squeeze main contrib non-free

Translation(s): English - Français


Marvell 88W8385, 88W8388, 88W8686 devices (libertas)

This page describes how to enable support for WiFi devices based on Marvell Libertas chipsets on Debian systems.

The libertas fullMAC driver provides support for wireless LAN devices based on specific Marvell Technology Group "Libertas" chipsets:

  • 88W8385 (Compact Flash, SDIO)
  • 88W8388 (USB)
  • 88W8686 (SDIO, GSPI)

Supported devices are listed at the end of this page.

The driver is part of the Linux kernel. Non-free firmware is required for device operation.

{i} The Libertas 88W8335 (PCI) softMAC chipset is not supported (see NDISwrapper).

Installation

Debian 7 "Wheezy"

  1. Add a "non-free" component to /etc/apt/sources.list, for example:

    # Debian 7 "Wheezy"
    deb http://httpredir.debian.org/debian/ wheezy main contrib non-free
  2. Update the list of available packages and install the firmware-libertas package:

    # apt-get update && apt-get install firmware-libertas
  3. Connect the device to your system. The necessary kernel module is automatically loaded for supported devices.

  4. Configure your wireless interface as appropriate.

Debian 6.0 "Squeeze"

  1. Add a "non-free" component to /etc/apt/sources.list, for example:

    # Debian 6.0 "Squeeze"
    deb http://httpredir.debian.org/debian/ squeeze main contrib non-free
  2. Update the list of available packages and install the libertas-firmware package:

    # apt-get update && apt-get install libertas-firmware
  3. Connect the device to your system. The necessary kernel module is automatically loaded for supported devices.

  4. Configure your wireless interface as appropriate.

Supported Devices

libertas_cs

libertas_sdio

libertas_spi

usb8xxx

The following list is based on the alias fields of modinfo usb8xxx in Debian 3.2.0 (3.2.46-1) kernel images.

  • USB: 05A3:8388 ARC International Marvell 88W8388 802.11a/b/g WLAN
    USB: 1286:2001 Marvell Semiconductor, Inc. 88W8388 802.11a/b/g WLAN

See Also


CategoryHardware | CategoryWireless