This page explains how to configure and use Intel's ipw2200 and ipw2915 wireless Network adapter. (if your unsure which device you have, check [#device-identification]). ?TableOfContents(2)

Installation and configuration

Download Firmware

Install the firmware-ipw2x00 package from non-free, which is in lenny and higher.

The firmware will be loaded when the system detects the card again.

ipw2200-bss.fw in Debian-installer

Debian-installer may prompt for the firmware (ipw2200-bss.fw). You will have to download and extract the firmware, as explained [http://d-i.alioth.debian.org/manual/en.i386/ch06s04.html here] (and [http://www.debian.org/releases/testing/i386/ here] once lenny is released).

Load ipw2200 module

Note: The relevant drivers are shipped with the linux image package in Etch and Lenny. As they are up to date there is no need of external ipw2200 module usage.

Using the wireless

See [:WiFi/HowToUse:How To use Wifi network adapter].

Setting the LED

To switch on the LED (if not automatically)

Also creating the file "/etc/modprobe.d/ipw2200:

?Anchor(device-identification)

Device identification

Intel ipw2200

Intel ipw2915

Other PCI-IDs

Some other devices should work the exact same way with ipw2200 module. check  modinfo ipw2200 output.


See also:

CategoryHardware CategoryNetwork