Differences between revisions 9 and 10
⇤ ← Revision 9 as of 2008-01-19 09:59:52 →
Size: 3037
Editor: FranklinPiat
Comment: move "Device identification" at the bottom of the page.
← Revision 10 as of 2008-03-10 02:59:30 → ⇥
Size: 3043
Editor: JoeNahmias
Comment: rmmod is deprecated
Deletions are marked like this. Additions are marked like this.
Line 23: Line 23:
rmmod ipw2200 modprobe -r ipw2200

This page explains how to configure and use Intel's ipw2200 and ipw2915 wireless Network adapter. (if your unsure which device you have, check [#device-identification]).

Installation and configuration

  • We need to download firmware from: http://ipw2200.sourceforge.net/firmware.php?fid=7 

    wget http://ipw2200.sourceforge.net/firmware.php?i_agree_to_the_license=yes&f=ipw2200-fw-3.0.tgz
  • Untar it 
    tar xzvf ipw2200-fw-3.0.tgz -C /lib/firmware
mv /lib/firware/ipw2200-fw-3.0/* /lib/firmware
rmdir /lib/firmware/ipw2200-fw-3.0
  • The firmware will be loaded when the system detects the card again.

Load ipw2200 module

Note: The relevant drivers are shipped with the linux image package in Etch and Lenny. As they are up to date there is no need of external ipw2200 module usage. 

  • modprobe -r ipw2200
modprobe ipw2200
  • Then "ip a" should list your card (wlan0, or eth2).
  • Reboot, and your wireless card will show up.

Using the wireless

Gnome: Right Click on Gnome Panel -> Add to panel -> Select Network Monitor -> Click Add. You will see a network status icon. Right click on it and configure your wireless Device. (network-manager-gnome)

KDE: Install network-manager-kde if its not installed already.

?Anchor(device-identification)

Device identification

Intel ipw2200

  • lspci -nn | grep "Wireless"
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)

Intel ipw2915

  • lspci -nn | grep "Wireless"
0b:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG Network Connection [8086:4224] (rev 05)

Other PCI-IDs

Some other devices should work the exact same way with ipw2200 module. check  modinfo ipw2200 output. 

  •  modinfo ipw2200  | grep 'pci:' | sed -e 's/^.*:v0000\([^d]*\)d0000\([^s]*\)s.*/[\1:\2]/' | sort -u
[8086:1043]
[8086:104F]
[8086:4220]
[8086:4221]
[8086:4223]
[8086:4224]

  • If you aren't familiar with PCI-ID, read [:HowToIdentifyADevice/PCI:How To Identify A PCI Device]

See also:

CategoryHardware