?TableOfContents
This is a simple page that list all installation process and hooks to configure all periperals on an iMac Intel
System outputs
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) 00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22) 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 01) 04:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
lsusb
Bus 005 Device 004: ID 05ac:8206 Apple, Inc. Bluetooth USB Host Controller Bus 005 Device 003: ID 05ac:8240 Apple, Inc. IR Receiver [build-in] Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 05ac:020c Apple, Inc. Extended Keyboard [Mitsumi] Bus 002 Device 003: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi] Bus 002 Device 002: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048] Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 05ac:8501 Apple, Inc. Built-in iSight [Micron] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/proc/cpuinfo
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping : 6 cpu MHz : 2163.865 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4332.72 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping : 6 cpu MHz : 2163.865 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4327.52 clflush size : 64 power management:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 12:56:41 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f0b9000 (usable) [ 0.000000] BIOS-e820: 000000007f0b9000 - 000000007f2ba000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f2ba000 - 000000007febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 1136MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 520377) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] ?HighMem 229376 -> 520377 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 520377 [ 0.000000] On node 0 totalpages: 520377 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] ?HighMem zone: 2274 pages used for memmap [ 0.000000] ?HighMem zone: 288727 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 7FEFD1C0, 0074 (r1 APPLE Apple00 90 1000013) [ 0.000000] ACPI: FACP 7FEFB000, 00F4 (r3 APPLE Apple00 90 Loki 5F) [ 0.000000] ACPI: DSDT 7FEF0000, 3CEA (r1 APPLE iMac5,1 10001 INTL 20050309) [ 0.000000] ACPI: FACS 7FEC0000, 0040 [ 0.000000] ACPI: HPET 7FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 7FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 7FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 7FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 7FEF5000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 7FEF4000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 7FEBB000, 064F (r1 APPLE ?SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FEBA000, 069C (r1 APPLE ?SataSec 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 7FEEF000, 04DC (r1 APPLE ?CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516311 [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux root=804 quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 2163.865 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2052612k/2081508k available (1767k kernel code, 27788k reserved, 749k data, 244k init, 1164004k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037d000 - 0xc03ba000 ( 244 kB) [ 0.004000] .data : 0xc02b9e23 - 0xc0375620 ( 749 kB) [ 0.004000] .text : 0xc0100000 - 0xc02b9e23 (1767 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083949] Calibrating delay using timer specific routine.. 4332.72 BogoMIPS (lpj=8665456) [ 0.083982] Security Framework initialized [ 0.083987] SELinux: Disabled at boot. [ 0.083991] Capability LSM initialized [ 0.084003] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 4096K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] ACPI: Core revision 20080321 [ 0.104214] ENABLING IO-APIC IRQs [ 0.104409] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.144009] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.144009] Booting processor 1/1 ip 6000 [ 0.152009] Initializing CPU#1 [ 0.152009] Calibrating delay using timer specific routine.. 4327.52 BogoMIPS (lpj=8655052) [ 0.152009] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.152009] CPU: L2 cache: 4096K [ 0.152009] CPU: Physical Processor ID: 0 [ 0.152009] CPU: Processor Core ID: 1 [ 0.152009] Intel machine check architecture supported. [ 0.152009] Intel machine check reporting enabled on CPU#1. [ 0.232014] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.232014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.236014] Brought up 2 CPUs [ 0.236014] Total of 2 processors activated (8660.25 BogoMIPS). [ 0.236014] CPU0 attaching sched-domain: [ 0.236014] domain 0: span 0-1 [ 0.236014] groups: 0 1 [ 0.236014] CPU1 attaching sched-domain: [ 0.236014] domain 0: span 0-1 [ 0.236014] groups: 1 0 [ 0.236014] net_namespace: 660 bytes [ 0.236014] Booting paravirtualized kernel on bare hardware [ 0.236014] NET: Registered protocol family 16 [ 0.236014] ACPI: bus type pci registered [ 0.236014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.236014] PCI: MCFG area at e0000000 reserved in E820 [ 0.236014] PCI: Using MMCONFIG for extended config space [ 0.236014] PCI: Using configuration type 1 for base access [ 0.236014] Setting up standard PCI resources [ 0.236015] ACPI: EC: EC description table is found, configuring boot EC [ 0.273840] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.274237] ACPI: Interpreter enabled [ 0.274240] ACPI: (supports S0 S3 S4 S5) [ 0.274253] ACPI: Using IOAPIC for interrupt routing [ 0.280017] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.280017] ACPI: EC: driver started in poll mode [ 0.280017] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.280017] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.280017] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.280017] PCI: Transparent bridge - 0000:00:1e.0 [ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.288018] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.288018] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.288018] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.288018] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.288018] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.288018] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.288018] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.288018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.288018] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.288018] pnp: PnP ACPI init [ 0.288018] ACPI: bus type pnp registered [ 0.288018] pnp: PnP ACPI: found 9 devices [ 0.288018] ACPI: ACPI bus type pnp unregistered [ 0.288018] PnPBIOS: Disabled by ACPI PNP [ 0.288018] PCI: Using ACPI for IRQ routing [ 0.292137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.292142] hpet0: 3 64-bit timers, 14318180 Hz [ 0.293659] ACPI: RTC can wake from S4 [ 0.300605] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.300608] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.300611] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.300613] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.300616] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.300619] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.300626] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.300632] system 00:07: ioport range 0x680-0x6ef has been reserved [ 0.300635] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.300637] system 00:07: ioport range 0x810-0x817 has been reserved [ 0.300641] system 00:07: ioport range 0x400-0x47f has been reserved [ 0.300643] system 00:07: ioport range 0x500-0x53f has been reserved [ 0.300646] system 00:07: ioport range 0x1640-0x164f has been reserved [ 0.332490] PCI: Bridge: 0000:00:01.0 [ 0.332490] IO window: 2000-2fff [ 0.332490] MEM window: 0x90400000-0x904fffff [ 0.332490] PREFETCH window: 0x0000000080000000-0x000000008fffffff [ 0.332490] PCI: Bridge: 0000:00:1c.0 [ 0.332490] IO window: 1000-1fff [ 0.332490] MEM window: 0x90300000-0x903fffff [ 0.332490] PREFETCH window: 0x0000000090600000-0x00000000906fffff [ 0.332490] PCI: Bridge: 0000:00:1c.1 [ 0.332490] IO window: disabled. [ 0.332490] MEM window: 0x90200000-0x902fffff [ 0.332490] PREFETCH window: 0x0000000090000000-0x00000000900fffff [ 0.332490] PCI: Bridge: 0000:00:1e.0 [ 0.332490] IO window: disabled. [ 0.332490] MEM window: 0x90100000-0x901fffff [ 0.332490] PREFETCH window: disabled. [ 0.332490] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.332490] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.332490] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.332490] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.332490] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.332490] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.332490] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.332490] NET: Registered protocol family 2 [ 0.345842] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.346036] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.346387] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.348046] TCP: Hash tables configured (established 131072 bind 65536) [ 0.348049] TCP reno registered [ 0.355320] NET: Registered protocol family 1 [ 0.355407] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.507172] Switched to high resolution mode on CPU 0 [ 0.597953] it is [ 0.860913] Freeing initrd memory: 7341k freed [ 0.864914] audit: initializing netlink socket (disabled) [ 0.864914] type=2000 audit(1219950004.856:1): initialized [ 0.864914] highmem bounce pool size: 64 pages [ 0.864914] Total HugeTLB memory allocated, 0 [ 0.864914] VFS: Disk quotas dquot_6.5.1 [ 0.864914] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.864914] msgmni has been set to 1751 [ 0.864914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.864914] io scheduler noop registered [ 0.864914] io scheduler anticipatory registered [ 0.864914] io scheduler deadline registered [ 0.864914] io scheduler cfq registered (default) [ 0.864914] pci 0000:01:00.0: Boot video device [ 0.864914] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.864914] assign_interrupt_mode Found MSI capability [ 0.864914] Allocate Port Service[0000:00:01.0:pcie00] [ 0.864914] Allocate Port Service[0000:00:01.0:pcie03] [ 0.864914] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.864914] assign_interrupt_mode Found MSI capability [ 0.864914] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.864914] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.864914] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.864914] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.864914] assign_interrupt_mode Found MSI capability [ 0.864914] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.864914] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.864914] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.864914] vesafb: framebuffer at 0x80000000, mapped to 0xf8880000, using 3072k, total 16384k [ 0.864914] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 0.864914] vesafb: protected mode interface info at c000:ad04 [ 0.864914] vesafb: pmi: set display start = c00cad8c, set palette = c00cae48 [ 0.864914] vesafb: scrolling: redraw [ 0.864914] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.888913] Console: switching to colour frame buffer device 128x48 [ 0.912913] fb0: VESA VGA frame buffer device [ 0.912913] isapnp: Scanning for PnP cards... [ 1.221988] isapnp: No Plug & Play device found [ 1.224925] hpet_resources: 0xfed00000 is busy [ 1.224925] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.228914] brd: module loaded [ 1.228914] PNP: No PS/2 controller found. Probing ports directly. [ 1.228914] i8042.c: No controller found. [ 1.228914] mice: PS/2 mouse device common for all mice [ 1.228914] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.228914] rtc0: alarms up to one month, y3k [ 1.228914] cpuidle: using governor ladder [ 1.228914] cpuidle: using governor menu [ 1.228914] No iBFT detected. [ 1.229256] TCP cubic registered [ 1.229256] NET: Registered protocol family 17 [ 1.229256] Using IPI No-Shortcut mode [ 1.229256] registered taskstats version 1 [ 1.229256] rtc_cmos 00:08: setting system clock to 2008-08-28 19:00:06 UTC (1219950006) [ 1.229256] Freeing unused kernel memory: 244k freed [ 1.315243] ACPI: SSDT 7FEB8C10, 02AE (r1 APPLE ?Cpu0Ist 3000 INTL 20050309) [ 1.315243] ACPI: SSDT 7FEB7C90, 0232 (r1 APPLE ?Cpu0Cst 3001 INTL 20050309) [ 1.315243] Monitor-Mwait will be used to enter C-1 state [ 1.315243] Monitor-Mwait will be used to enter C-2 state [ 1.315243] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.315243] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.315243] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.315243] ACPI: SSDT 7FEB8F10, 0087 (r1 APPLE ?Cpu1Ist 3000 INTL 20050309) [ 1.315243] ACPI: SSDT 7FEB7F10, 0085 (r1 APPLE ?Cpu1Cst 3000 INTL 20050309) [ 1.316321] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 1.316321] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.316321] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.316321] Marking TSC unstable due to: TSC halts in idle. [ 1.486000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.486000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 1.486000] sky2 0000:02:00.0: v1.21 addr 0x90300000 irq 16 Yukon-EC (0xb6) rev 2 [ 1.486000] sky2 eth0: addr 00:16:cb:95:8f:ed [ 1.514000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1.514000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 1.522001] usbcore: registered new interface driver usbfs [ 1.522001] usbcore: registered new interface driver hub [ 1.522001] usbcore: registered new device driver usb [ 1.534783] USB Universal Host Controller Interface driver v3.0 [ 1.535536] No dock devices found. [ 1.541436] SCSI subsystem initialized [ 1.576849] libata version 3.00 loaded. [ 1.582027] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 1.582027] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.582027] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.582027] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.582027] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.585935] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.585942] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.585954] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90505400 [ 1.603590] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.603653] usb usb1: configuration #1 chosen from 1 choice [ 1.603678] hub 1-0:1.0: USB hub found [ 1.603683] hub 1-0:1.0: 8 ports detected [ 1.610025] udev: renamed network interface eth0 to eth1 [ 1.706571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.706577] usb usb1: New USB device strings: Mfr=3, Product=2, ?SerialNumber=1 [ 1.706582] usb usb1: Product: EHCI Host Controller [ 1.706585] usb usb1: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 1.706589] usb usb1: ?SerialNumber: 0000:00:1d.7 [ 1.710372] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 1.710372] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.710372] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.710372] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.710372] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 [ 1.710372] usb usb2: configuration #1 chosen from 1 choice [ 1.710372] hub 2-0:1.0: USB hub found [ 1.710372] hub 2-0:1.0: 2 ports detected [ 1.813675] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.813681] usb usb2: New USB device strings: Mfr=3, Product=2, ?SerialNumber=1 [ 1.813685] usb usb2: Product: UHCI Host Controller [ 1.813689] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 1.813693] usb usb2: ?SerialNumber: 0000:00:1d.0 [ 1.814372] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.814372] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.814372] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.814372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.814372] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080 [ 1.814372] usb usb3: configuration #1 chosen from 1 choice [ 1.814372] hub 3-0:1.0: USB hub found [ 1.814372] hub 3-0:1.0: 2 ports detected [ 1.917678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.917684] usb usb3: New USB device strings: Mfr=3, Product=2, ?SerialNumber=1 [ 1.917688] usb usb3: Product: UHCI Host Controller [ 1.917692] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 1.917696] usb usb3: ?SerialNumber: 0000:00:1d.1 [ 1.918371] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.918371] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.918371] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.918371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.918371] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060 [ 1.918371] usb usb4: configuration #1 chosen from 1 choice [ 1.918371] hub 4-0:1.0: USB hub found [ 1.918371] hub 4-0:1.0: 2 ports detected [ 2.021212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.021219] usb usb4: New USB device strings: Mfr=3, Product=2, ?SerialNumber=1 [ 2.021223] usb usb4: Product: UHCI Host Controller [ 2.021227] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 2.021231] usb usb4: ?SerialNumber: 0000:00:1d.2 [ 2.022371] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 2.022371] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 2.022371] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.022371] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.022371] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 [ 2.022371] usb usb5: configuration #1 chosen from 1 choice [ 2.022371] hub 5-0:1.0: USB hub found [ 2.022371] hub 5-0:1.0: 2 ports detected [ 2.125275] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.125281] usb usb5: New USB device strings: Mfr=3, Product=2, ?SerialNumber=1 [ 2.125285] usb usb5: Product: UHCI Host Controller [ 2.125289] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 2.125293] usb usb5: ?SerialNumber: 0000:00:1d.3 [ 2.126372] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 2.179396] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90100000-901007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 2.187414] ata_piix 0000:00:1f.2: version 2.12 [ 2.187414] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.187414] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 2.191414] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.197214] Uniform Multi-Platform E-IDE driver [ 2.197214] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.322971] usb 1-4: configuration #1 chosen from 1 choice [ 2.323285] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300 [ 2.323291] usb 1-4: New USB device strings: Mfr=0, Product=0, ?SerialNumber=0 [ 2.343366] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 2.347137] scsi0 : ata_piix [ 2.347142] scsi1 : ata_piix [ 2.347142] ata1: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 19 [ 2.347142] ata2: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 19 [ 2.557661] ata1.01: ATA-7: WDC WD2500JS-40TGB0, 20.06C04, max UDMA/133 [ 2.557661] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.571542] ata1.01: configured for UDMA/133 [ 2.737388] scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-40T 20.0 PQ: 0 ANSI: 5 [ 2.741195] ICH7: IDE controller (0x8086:0x27df rev 0x02) at PCI slot 0000:00:1f.1 [ 2.741195] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.741195] ICH7: not 100% native mode: will probe irqs later [ 2.741195] ide0: BM-DMA at 0x30c0-0x30c7 [ 2.741195] ide1: BM-DMA at 0x30c8-0x30cf [ 2.741195] Probing IDE interface ide0... [ 2.760007] Driver 'sd' needs updating - please use bus_type methods [ 2.760007] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 2.760007] sd 0:0:1:0: [sda] Write Protect is off [ 2.760007] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.760007] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.760007] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 2.760007] sd 0:0:1:0: [sda] Write Protect is off [ 2.760007] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.760007] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.760007] sda: sda1 sda2 sda3 sda4 [ 2.805952] sd 0:0:1:0: [sda] Attached SCSI disk [ 3.043130] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 3.219212] usb 2-1: configuration #1 chosen from 1 choice [ 3.221775] hub 2-1:1.0: USB hub found [ 3.227575] hub 2-1:1.0: 3 ports detected [ 3.334930] usb 2-1: New USB device found, idVendor=05ac, idProduct=1003 [ 3.334936] usb 2-1: New USB device strings: Mfr=1, Product=2, ?SerialNumber=0 [ 3.334941] usb 2-1: Product: Hub in Apple Extended USB Keyboard [ 3.334945] usb 2-1: Manufacturer: Mitsumi Electric [ 3.463147] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0017f2fffe735b20] [ 3.480555] hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive [ 3.701534] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 3.814310] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.814606] hda: UDMA/66 mode selected [ 3.814939] Probing IDE interface ide1... [ 3.885128] usb 5-1: configuration #1 chosen from 1 choice [ 3.888837] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 [ 3.888843] usb 5-1: New USB device strings: Mfr=0, Product=0, ?SerialNumber=0 [ 4.123817] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 4.306220] usb 5-2: configuration #1 chosen from 1 choice [ 4.308887] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240 [ 4.308890] usb 5-2: New USB device strings: Mfr=1, Product=2, ?SerialNumber=0 [ 4.308892] usb 5-2: Product: IR Receiver [ 4.308894] usb 5-2: Manufacturer: Apple Computer, Inc. [ 4.385472] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.385503] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.402830] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 4.402830] Uniform CD-ROM driver Revision: 3.20 [ 4.517315] usb 2-1.2: new low speed USB device using uhci_hcd and address 3 [ 4.658181] usb 2-1.2: configuration #1 chosen from 1 choice [ 4.660949] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=0304 [ 4.660952] usb 2-1.2: New USB device strings: Mfr=1, Product=2, ?SerialNumber=0 [ 4.660954] usb 2-1.2: Product: Apple Optical USB Mouse [ 4.660956] usb 2-1.2: Manufacturer: Mitsumi Electric [ 4.864321] usb 2-1.3: new full speed USB device using uhci_hcd and address 4 [ 5.004174] usb 2-1.3: configuration #1 chosen from 1 choice [ 5.007806] usb 2-1.3: New USB device found, idVendor=05ac, idProduct=020c [ 5.007809] usb 2-1.3: New USB device strings: Mfr=1, Product=3, ?SerialNumber=0 [ 5.007811] usb 2-1.3: Product: Apple Extended USB Keyboard [ 5.007813] usb 2-1.3: Manufacturer: Mitsumi Electric [ 5.012339] usbcore: registered new interface driver hiddev [ 5.027824] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint [ 5.032520] hiddev96hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2 [ 5.046792] input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input0 [ 5.046958] input,hidraw1: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.0-1.2 [ 5.054766] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1 [ 5.055192] input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 [ 5.059988] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2 [ 5.060111] input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 [ 5.060140] usbcore: registered new interface driver usbhid [ 5.060145] usbhid: v2.6:USB HID core driver [ 5.125687] ReiserFS: sda4: found reiserfs format "3.6" with standard journal [ 5.125687] ReiserFS: sda4: using ordered data mode [ 5.135395] ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 5.135395] ReiserFS: sda4: checking transaction log (sda4) [ 5.167338] ReiserFS: sda4: Using r5 hash to sort names [ 6.833173] udevd version 125 started [ 7.344983] Linux agpgart interface v0.103 [ 7.369251] input: Power Button (FF) as /class/input/input3 [ 7.423839] ACPI: Power Button (FF) [PWRF] [ 7.423892] input: Power Button (CM) as /class/input/input4 [ 7.487814] ACPI: Power Button (CM) [PWRB] [ 7.488404] input: Video Bus as /class/input/input5 [ 7.548074] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.802577] firmware: requesting isight.fw [ 7.822577] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 7.835718] input: PC Speaker as /class/input/input6 [ 7.841383] iTCO_wdt: Intel TCO ?WatchDog Timer Driver v1.03 (30-Apr-2008) [ 7.893383] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) [ 7.893383] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.950499] usbcore: registered new interface driver isight_firmware [ 7.954500] Error: Driver 'pcspkr' is already registered, aborting... [ 7.969796] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 7.969796] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.004008] hda_codec: STAC922x, Apple subsys_id=106b1700 [ 16.244544] loop: module loaded [ 16.286858] Linux video capture interface: v2.00 [ 16.302961] usbcore: registered new interface driver uvcvideo [ 16.302961] USB Video Class driver (v0.1.0) [ 16.330141] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 16.382581] usbcore: registered new interface driver ndiswrapper [ 16.455710] device-mapper: uevent: version 1.0.3 [ 16.455710] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 16.654511] fuse init (API version 7.9) [ 16.747382] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 16.865550] NTFS driver 2.1.29 [Flags: R/W MODULE]. [ 16.929674] NTFS volume version 3.1. [ 16.929674] NTFS-fs warning (device sda3): load_system_files(): Unsupported volume flags 0x4000 encountered. [ 16.929674] NTFS-fs error (device sda3): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. [ 17.676330] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.803065] sky2 eth1: enabling interface [ 21.631446] NET: Registered protocol family 10 [ 21.631446] lo: Disabled Privacy Extensions [ 21.631446] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.911790] lp: driver loaded but no devices found [ 21.925994] ppdev: user-space parallel port driver [ 23.828932] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 24.900593] usb 1-4: USB disconnect, address 3 [ 25.295700] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 25.339341] usb 5-1: USB disconnect, address 2 [ 25.347701] Bluetooth: Core ver 2.11 [ 25.347701] NET: Registered protocol family 31 [ 25.347701] Bluetooth: HCI device and connection manager initialized [ 25.347701] Bluetooth: HCI socket layer initialized [ 25.395379] Bluetooth: L2CAP ver 2.9 [ 25.395379] Bluetooth: L2CAP socket layer initialized [ 25.399371] Bluetooth: RFCOMM socket layer initialized [ 25.399371] Bluetooth: RFCOMM TTY layer initialized [ 25.399371] Bluetooth: RFCOMM ver 1.8 [ 26.081274] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 26.276325] usb 5-1: configuration #1 chosen from 1 choice [ 26.287010] usb 5-1: New USB device found, idVendor=05ac, idProduct=8206 [ 26.287010] usb 5-1: New USB device strings: Mfr=0, Product=0, ?SerialNumber=0 [ 26.338782] Bluetooth: HCI USB driver ver 2.9 [ 26.340037] usbcore: registered new interface driver hci_usb [ 27.357134] usb 1-4: new high speed USB device using ehci_hcd and address 7 [ 27.491262] usb 1-4: configuration #1 chosen from 1 choice [ 27.491412] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 27.494546] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 27.496136] input: Built-in iSight as /class/input/input7 [ 27.517096] usb 1-4: New USB device found, idVendor=05ac, idProduct=8501 [ 27.517101] usb 1-4: New USB device strings: Mfr=1, Product=2, ?SerialNumber=0 [ 27.517103] usb 1-4: Product: Built-in iSight [ 27.517105] usb 1-4: Manufacturer: Micron [ 27.860044] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 27.860547] usbcore: deregistering interface driver ndiswrapper [ 27.879978] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 27.937604] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded [ 27.938818] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 27.938818] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 27.951527] ndiswrapper: using IRQ 17 [ 28.194961] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf [ 28.194961] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 28.198961] usbcore: registered new interface driver ndiswrapper [ 28.210433] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.266737] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 42.773120] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.149971] wlan0: no IPv6 routers present [ 84.706662] ndiswrapper: device wlan0 removed [ 84.706662] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 84.706662] usbcore: deregistering interface driver ndiswrapper [ 84.747081] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 84.763411] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded [ 84.763411] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 84.763411] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 84.779795] ndiswrapper: using IRQ 17 [ 85.019495] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf [ 85.019536] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 85.022077] usbcore: registered new interface driver ndiswrapper [ 85.043756] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 85.050357] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 93.636355] ndiswrapper: device wlan0 removed [ 93.636372] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 93.636440] usbcore: deregistering interface driver ndiswrapper [ 93.668198] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 93.690362] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded [ 93.690525] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 93.690563] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 93.705821] ndiswrapper: using IRQ 17 [ 93.946187] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf [ 93.946187] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Wireless
Ndiswrapper
sudo aptitude install ndiswrapper-sources ndiswrapper-utils-1.9 sudo m-a auto-install ndiswrapper
Driver loading (non-dfsg/non-free)
wget http://ftp.us.dell.com/network/R151517.EXE mkdir driver unzip -a R151517.EXE -d driver/ cd driver/DRIVER/ sudo ndiswrapper -i bcmwl5.inf sudo ndiswrapper -l sudo ndiswrapper -m sudo modprobe ndiswrapper echo ndiswrapper >> /etc/modules
Init script
echo << EOF #! /bin/sh ### BEGIN INIT INFO # Provides: ndiswrapper # Required-Start: # Required-Stop: # Default-Start: S # Default-Stop: # Short-Description: enable to load ndiswrapper # Description: enable to load ndiswrapper ### END INIT INFO rmmod ohci_hcd rmmod ssb rmmod ndiswrapper modprobe ndiswrapper modprobe ssb modprobe ohci_hcd ############# end file ############ EOF sudo chmod 755 /etc/init.d/ndiswrapper sudo ln -s /etc/init.d/ndiswrapper /etc/rc2.d/S99ndiswrapper
Alternative: graphical installation
sudo aptitude install ndisgtk
Some help here: http://doc.ubuntu-fr.org/bcm4328
iSight (integrated Webcam)
sudo aptitude install isight-firmware-tools
Firmware location on Mac OS X filesystem (required)
/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBVideoSupport.kext/Contents/MacOS/AppleUSBVideoSupport
uvc module building
sudo aptitude install linux-uvc-source m-a auto-install linux-uvc-source modprobe uvcvideo echo "uvcvideo" >> /etc/modules
Sound
Automaticly discovered, nothing to do
Screen resolution
Nothing to do, Xorg (1.4.2 release now), recognize and adapt resolution.
Others links
http://www.mactel-linux.org/wiki/Main_Page (seems to be old)