Diff for "iMacIntel"

00:01.0 00:07.0 00:1b.0 00:1c.0 00:1c.1 00:1d.0 00:1d.1 00:1d.2 00:1d.3 00:1d.7 00:1e.0 00:1f.0 00:1f.1 00:1f.2 00:1f.3 01:00.0 02:00.0 03:00.0 04:03.0

lsusb

Bus Bus Bus Bus Bus Bus Bus Bus Bus Bus

/proc/cpuinfo

vendor_id cpu family model model name stepping cpu MHz cache size physical id siblings core id cpu cores apicid initial apicid fdiv_bug hlt_bug f00f_bug coma_bug fpu fpu_exception cpuid level wp flags bogomips clflush size power processor vendor_id cpu family model model name stepping cpu MHz cache size physical id siblings core id cpu cores apicid initial apicid fdiv_bug hlt_bug f00f_bug coma_bug fpu fpu_exception cpuid level wp flags bogomips clflush size power

dmidecode

SMBIOS 43 Table Handle BIOS Handle System Handle Base Handle Chassis Handle System Handle BIOS Handle System Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle Port Handle System Handle On Handle On Handle On Handle On Handle On Handle OEM-specific Handle Processor Handle Cache Handle Cache Handle Cache Handle Processor Handle Cache Handle Cache Handle Cache Handle Physical Handle Memory Handle Memory Handle Memory Handle Memory Handle Memory Handle

dmesg

[ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [ [

Some bench

dd 200000+0 200000+0 204800000 200000+0 200000+0 204800000

hdparm

/de /d

Get After installingWireless

NDISwrapper

$ $

Driver $ $ $ $ $ $ $ $ $

Init script

#! ### # # # # # # # ### rmmod rmmod rmmod modprobe modprobe modprobe ############# EO $ $

Alternative:
iSight
uvc module
$

Sound

Screen resolution<

Keyboard Video Radeonhd

$ 13798 13968 13927

Fglrx

$ display: :0.0 OpenGL OpenGL OpenGL

Apple Bus # # LI #Don't #ST #Don't #S #Try LO # DR # # DE MO # LI LI bits eps aeps one zero pre_data gap end 00 00 00 00 00

Sensors Loading modules

Management #
Temperature label label label label label label label label label label label label EOFap Adapter: ODD : HDD : CPU : Ambient: Enclosure CPU A: unknown TC0P: GPU Heatsink: GPU: unknown TG0T: co Adapter: Core 0: co Adapter: Core 1:
Software suspendBoot loader
sudo sudo sudo sudo
TODO
See Also
- External Links
  Contents
  1. page?
  2. >
    ol>
    a>
    i> space from others filesystems or OS
  3. /a>
    i> loading (non-dfsg/non-free)
    i> ">Alternative: graphical installation
  4. (integrated Webcam)
    ystem_.28required_and_non-free.29">Firmware location on Mac OS X filesystem (required and non-free)
    loading
  5. resolution
  6. Infrared Remote
  7. (applesmc module)
    >
    and fan descriptions
  8. suspend
  9. i> /li>

class="line862">Because i want to regroup some interesting informations/process/hooks to configure iMac Intel 5,1 late 2006 model with Debian GNU/Linux Lenny (2008/08/28)

class="anchor" id="line-9">

This hardware can be used with i386 or amd64 architecture. The little bench test i made shows that the use of amd64 arch improve cache read access.

class="anchor" id="line-13">

class="line867">

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03) Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) VGA compatible controller [0300]: ATI Technologies Inc M56P [Radeon Mobility X1600] [1002:71c5] Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22) Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 01) FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 61)

class="line867">

Bus 005 Device 004: ID 05ac:8206 Apple, Inc. Bluetooth USB Host Controller 005 Device 003: ID 05ac:8240 Apple, Inc. IR Receiver [build-in] 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 002 Device 004: ID 05ac:020c Apple, Inc. Extended Keyboard [Mitsumi] 002 Device 003: ID 05ac:0304 Apple, Inc. Optical USB Mouse [Mitsumi] 002 Device 002: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048] 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 001 Device 007: ID 05ac:8501 Apple, Inc. Built-in iSight [Micron] 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

> class="line867">

processor       : 0 : GenuineIntel : 6 : 15 : Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz : 6 : 2163.865 : 4096 KB : 0 : 2 : 0 : 2 : 0 : 0 : no : no : no : no : yes : yes : 10 : yes : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm : 4332.72 : 64 management: : 1 : GenuineIntel : 6 : 15 : Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz : 6 : 2163.865 : 4096 KB : 0 : 2 : 1 : 2 : 1 : 1 : no : no : no : no : yes : yes : 10 : yes : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm : 4327.52 : 64 management:

Because of the lm flag, it is possible (recommended ?) to use the amd64 architecture.

class="line867">

# dmidecode 2.9 2.4 present. structures occupying 1628 bytes. at 0x000E0000. 0x0000, DMI type 0, 24 bytes Information Vendor: Apple Computer, Inc. Version:     IM51.88Z.0090.B09.0706270921 Release Date: 06/27/07 ROM Size: 2048 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported ACPI is supported IEEE 1394 boot is supported Smart battery is supported Function key-initiated network boot is supported BIOS Revision: 0.1 0x0001, DMI type 1, 27 bytes Information Manufacturer: Apple Computer, Inc. Product Name: iMac5,1 Version: 1.0 Serial Number: *********** UUID: 9CF*****-D0C8-BD45-A79F-54EA5FB***** Wake-up Type: Power Switch SKU Number: System SKUNumber Family: Napa Mac 0x0002, DMI type 2, 16 bytes Board Information Manufacturer: Apple Computer, Inc. Product Name: Mac-F4228EC8 Version: DVT Serial Number: 1 Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Part Component Chassis Handle: 0x0003 Type: Unknown Contained Object Handles: 0 0x0003, DMI type 3, 21 bytes Information Manufacturer: Apple Computer, Inc. Type: All In One Lock: Not Present Version: Mac-F4228EC8 Serial Number: CK6370ACVUW Asset Tag: Asset Tag Boot-up State: Safe Power Supply State: Safe Thermal State: Other Security Status: Other OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: Unspecified Contained Elements: 0 0x0004, DMI type 32, 20 bytes Boot Information Status: No errors detected 0x0005, DMI type 13, 22 bytes Language Information Installable Languages: 1 <BAD INDEX> Currently Installed Language: Not Specified 0x0106, DMI type 12, 5 bytes Configuration Options 0x0107, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Mini DVI External Connector Type: Other Port Type: Video Port 0x0108, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Access Bus (USB) Port Type: USB 0x0109, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB 0x010A, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB 0x010B, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: FireWire0 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394) 0x010C, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: FireWire1 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394) 0x010D, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Ethernet External Connector Type: RJ-45 Port Type: Network Port 0x010E, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Airport Mini PCI Express External Connector Type: Other Port Type: Other 0x010F, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port 0x0110, DMI type 8, 9 bytes Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Audio Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port 0x0111, DMI type 8, 9 bytes Connector Information Internal Reference Designator: Speaker Internal Connector Type: Other External Reference Designator: None External Connector Type: None Port Type: Other 0x0112, DMI type 8, 9 bytes Connector Information Internal Reference Designator: FHB Internal Connector Type: Other External Reference Designator: None External Connector Type: None Port Type: Other 0x0113, DMI type 8, 9 bytes Connector Information Internal Reference Designator: Sata Internal Connector Type: Other External Reference Designator: None External Connector Type: None Port Type: Other 0x0114, DMI type 8, 9 bytes Connector Information Internal Reference Designator: Pata Internal Connector Type: Other External Reference Designator: None External Connector Type: None Port Type: Other 0x0115, DMI type 9, 13 bytes Slot Information Designation: AirPort Type: x1 PCI Express Current Usage: Available Length: Short ID: 2 Characteristics: 3.3 V is provided Hot-plug devices are supported SMBus signal is supported 0x0116, DMI type 10, 6 bytes Board Device Information Type: Video Status: Enabled Description: ATI M56 Video 0x0117, DMI type 10, 6 bytes Board Device Information Type: Ethernet Status: Enabled Description: Yukon Ethernet Controller 0x0118, DMI type 10, 6 bytes Board Device Information Type: Sound Status: Enabled Description: Azalia Audio Codec 0x0119, DMI type 10, 6 bytes Board Device Information Type: Other Status: Enabled Description: SATA 0x011A, DMI type 10, 6 bytes Board Device Information Type: Other Status: Enabled Description: PATA 0x011B, DMI type 136, 6 bytes Type Header and Data: 88 06 1B 01 00 00 0x011C, DMI type 4, 35 bytes Information Socket Designation: U2E1 Type: Central Processor Family: Pentium III Manufacturer: Intel(R) Corporation ID: F6 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 CPU         T Voltage: 1.6 V External Clock: 166 MHz Max Speed: 2160 MHz Current Speed: 2160 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x011F L2 Cache Handle: 0x011D L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified 0x011D, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 4096 KB Maximum Size: 4096 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative 0x011E, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative 0x011F, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative 0x0120, DMI type 4, 35 bytes Information Socket Designation: U2E1 Type: Central Processor Family: Pentium III Manufacturer: Intel(R) Corporation ID: F6 06 00 00 FF FB EB BF Signature: Type 0, Family 6, Model 15, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 CPU         T Voltage: 1.6 V External Clock: 166 MHz Max Speed: 2160 MHz Current Speed: 2160 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0123 L2 Cache Handle: 0x0121 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified 0x0121, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 4096 KB Maximum Size: 4096 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative 0x0122, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative 0x0123, DMI type 7, 19 bytes Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative 0x0124, DMI type 16, 15 bytes Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 0x0125, DMI type 17, 27 bytes Device Array Handle: 0x0124 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK 0 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz (1.5 ns) Manufacturer: 0xCE00000000000000 Serial Number: 0xF744CC8A Asset Tag: Unknown Part Number: 0x4D342037305432393533435A332D43453620 0x0126, DMI type 20, 19 bytes Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0125 Memory Array Mapped Address Handle: 0x0129 Partition Row Position: 1 Interleave Position: 1 Interleaved Data Depth: 1 0x0127, DMI type 17, 27 bytes Device Array Handle: 0x0124 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK 1 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz (1.5 ns) Manufacturer: 0xCE00000000000000 Serial Number: 0xF744CC87 Asset Tag: Unknown Part Number: 0x4D342037305432393533435A332D43453620 0x0128, DMI type 20, 19 bytes Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0127 Memory Array Mapped Address Handle: 0x0129 Partition Row Position: 2 Interleave Position: 2 Interleaved Data Depth: 1 0x0129, DMI type 19, 15 bytes Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x0124 Partition Width: 0 0xFFFD, DMI type 127, 4 bytes

class="line874">2.6.26-1-686:

[    0.000000] Initializing cgroup subsys cpuset 0.000000] Initializing cgroup subsys cpu 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 12:56:41 UTC 2008 0.000000] BIOS-provided physical RAM map: 0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 0.000000]  BIOS-e820: 0000000000100000 - 000000007f0b9000 (usable) 0.000000]  BIOS-e820: 000000007f0b9000 - 000000007f2ba000 (ACPI NVS) 0.000000]  BIOS-e820: 000000007f2ba000 - 000000007febe000 (ACPI data) 0.000000]  BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS) 0.000000]  BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data) 0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) 0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) 0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) 0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) 0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) 0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) 0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 0.000000] 1136MB HIGHMEM available. 0.000000] 896MB LOWMEM available. 0.000000] Entering add_active_range(0, 0, 520377) 0 entries of 256 used 0.000000] Zone PFN ranges: 0.000000]   DMA             0 ->     4096 0.000000]   Normal       4096 ->   229376 0.000000]   HighMem    229376 ->   520377 0.000000] Movable zone start PFN for each node 0.000000] early_node_map[1] active PFN ranges 0.000000]     0:        0 ->   520377 0.000000] On node 0 totalpages: 520377 0.000000]   DMA zone: 32 pages used for memmap 0.000000]   DMA zone: 0 pages reserved 0.000000]   DMA zone: 4064 pages, LIFO batch:0 0.000000]   Normal zone: 1760 pages used for memmap 0.000000]   Normal zone: 223520 pages, LIFO batch:31 0.000000]   HighMem zone: 2274 pages used for memmap 0.000000]   HighMem zone: 288727 pages, LIFO batch:31 0.000000]   Movable zone: 0 pages used for memmap 0.000000] DMI 2.4 present. 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) 0.000000] ACPI: XSDT 7FEFD1C0, 0074 (r1 APPLE   Apple00       90       1000013) 0.000000] ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       90 Loki       5F) 0.000000] ACPI: DSDT 7FEF0000, 3CEA (r1 APPLE   iMac5,1    10001 INTL 20050309) 0.000000] ACPI: FACS 7FEC0000, 0040 0.000000] ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: ASF! 7FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: SBST 7FEF5000, 0030 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: ECDT 7FEF4000, 0053 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: SSDT 7FEBB000, 064F (r1 APPLE   SataPri     1000 INTL 20050309) 0.000000] ACPI: SSDT 7FEBA000, 069C (r1 APPLE   SataSec     1000 INTL 20050309) 0.000000] ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309) 0.000000] ACPI: DMI detected: Apple 0.000000] ACPI: PM-Timer IO Port: 0x408 0.000000] ACPI: Local APIC address 0xfee00000 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 0.000000] ACPI: IRQ0 used by override. 0.000000] ACPI: IRQ2 used by override. 0.000000] ACPI: IRQ9 used by override. 0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 0.000000] Using ACPI (MADT) for SMP configuration information 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs 0.000000] PERCPU: Allocating 37960 bytes of per cpu data 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516311 0.000000] Kernel command line: auto BOOT_IMAGE=Linux root=804 quiet splash 0.000000] mapped APIC to ffffb000 (fee00000) 0.000000] mapped IOAPIC to ffffa000 (fec00000) 0.000000] Enabling fast FPU save and restore... done. 0.000000] Enabling unmasked SIMD FPU exception support... done. 0.000000] Initializing CPU#0 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) 0.000000] Extended CMOS year: 2000 0.000000] Detected 2163.865 MHz processor. 0.004000] Console: colour dummy device 80x25 0.004000] console [tty0] enabled 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 0.004000] Memory: 2052612k/2081508k available (1767k kernel code, 27788k reserved, 749k data, 244k init, 1164004k highmem) 0.004000] virtual kernel memory layout: 0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB) 0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB) 0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB) 0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB) 0.004000]       .init : 0xc037d000 - 0xc03ba000   ( 244 kB) 0.004000]       .data : 0xc02b9e23 - 0xc0375620   ( 749 kB) 0.004000]       .text : 0xc0100000 - 0xc02b9e23   (1767 kB) 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. 0.004000] CPA: page pool initialized 1 of 1 pages preallocated 0.004000] hpet clockevent registered 0.083949] Calibrating delay using timer specific routine.. 4332.72 BogoMIPS (lpj=8665456) 0.083982] Security Framework initialized 0.083987] SELinux:  Disabled at boot. 0.083991] Capability LSM initialized 0.084003] Mount-cache hash table entries: 512 0.084005] Initializing cgroup subsys ns 0.084005] Initializing cgroup subsys cpuacct 0.084005] Initializing cgroup subsys devices 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K 0.084005] CPU: L2 cache: 4096K 0.084005] CPU: Physical Processor ID: 0 0.084005] CPU: Processor Core ID: 0 0.084005] Intel machine check architecture supported. 0.084005] Intel machine check reporting enabled on CPU#0. 0.084005] using mwait in idle threads. 0.084005] Checking 'hlt' instruction... OK. 0.100006] ACPI: Core revision 20080321 0.104214] ENABLING IO-APIC IRQs 0.104409] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 0.144009] CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06 0.144009] Booting processor 1/1 ip 6000 0.152009] Initializing CPU#1 0.152009] Calibrating delay using timer specific routine.. 4327.52 BogoMIPS (lpj=8655052) 0.152009] CPU: L1 I cache: 32K, L1 D cache: 32K 0.152009] CPU: L2 cache: 4096K 0.152009] CPU: Physical Processor ID: 0 0.152009] CPU: Processor Core ID: 1 0.152009] Intel machine check architecture supported. 0.152009] Intel machine check reporting enabled on CPU#1. 0.232014] CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06 0.232014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. 0.236014] Brought up 2 CPUs 0.236014] Total of 2 processors activated (8660.25 BogoMIPS). 0.236014] CPU0 attaching sched-domain: 0.236014]  domain 0: span 0-1 0.236014]   groups: 0 1 0.236014] CPU1 attaching sched-domain: 0.236014]  domain 0: span 0-1 0.236014]   groups: 1 0 0.236014] net_namespace: 660 bytes 0.236014] Booting paravirtualized kernel on bare hardware 0.236014] NET: Registered protocol family 16 0.236014] ACPI: bus type pci registered 0.236014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 0.236014] PCI: MCFG area at e0000000 reserved in E820 0.236014] PCI: Using MMCONFIG for extended config space 0.236014] PCI: Using configuration type 1 for base access 0.236014] Setting up standard PCI resources 0.236015] ACPI: EC: EC description table is found, configuring boot EC 0.273840] ACPI: BIOS _OSI(Linux) query ignored via DMI 0.274237] ACPI: Interpreter enabled 0.274240] ACPI: (supports S0 S3 S4 S5) 0.274253] ACPI: Using IOAPIC for interrupt routing 0.280017] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 0.280017] ACPI: EC: driver started in poll mode 0.280017] ACPI: PCI Root Bridge [PCI0] (0000:00) 0.280017] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO 0.280017] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO 0.280017] PCI: Transparent bridge - 0000:00:1e.0 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] 0.280017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] 0.288018] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 0.288018] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) 0.288018] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 0.288018] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) 0.288018] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. 0.288018] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. 0.288018] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) 0.288018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) 0.288018] Linux Plug and Play Support v0.97 (c) Adam Belay 0.288018] pnp: PnP ACPI init 0.288018] ACPI: bus type pnp registered 0.288018] pnp: PnP ACPI: found 9 devices 0.288018] ACPI: ACPI bus type pnp unregistered 0.288018] PnPBIOS: Disabled by ACPI PNP 0.288018] PCI: Using ACPI for IRQ routing 0.292137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 0.292142] hpet0: 3 64-bit timers, 14318180 Hz 0.293659] ACPI: RTC can wake from S4 0.300605] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved 0.300608] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved 0.300611] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved 0.300613] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved 0.300616] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved 0.300619] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved 0.300626] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved 0.300632] system 00:07: ioport range 0x680-0x6ef has been reserved 0.300635] system 00:07: ioport range 0x800-0x80f has been reserved 0.300637] system 00:07: ioport range 0x810-0x817 has been reserved 0.300641] system 00:07: ioport range 0x400-0x47f has been reserved 0.300643] system 00:07: ioport range 0x500-0x53f has been reserved 0.300646] system 00:07: ioport range 0x1640-0x164f has been reserved 0.332490] PCI: Bridge: 0000:00:01.0 0.332490]   IO window: 2000-2fff 0.332490]   MEM window: 0x90400000-0x904fffff 0.332490]   PREFETCH window: 0x0000000080000000-0x000000008fffffff 0.332490] PCI: Bridge: 0000:00:1c.0 0.332490]   IO window: 1000-1fff 0.332490]   MEM window: 0x90300000-0x903fffff 0.332490]   PREFETCH window: 0x0000000090600000-0x00000000906fffff 0.332490] PCI: Bridge: 0000:00:1c.1 0.332490]   IO window: disabled. 0.332490]   MEM window: 0x90200000-0x902fffff 0.332490]   PREFETCH window: 0x0000000090000000-0x00000000900fffff 0.332490] PCI: Bridge: 0000:00:1e.0 0.332490]   IO window: disabled. 0.332490]   MEM window: 0x90100000-0x901fffff 0.332490]   PREFETCH window: disabled. 0.332490] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 0.332490] PCI: Setting latency timer of device 0000:00:01.0 to 64 0.332490] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 0.332490] PCI: Setting latency timer of device 0000:00:1c.0 to 64 0.332490] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 0.332490] PCI: Setting latency timer of device 0000:00:1c.1 to 64 0.332490] PCI: Setting latency timer of device 0000:00:1e.0 to 64 0.332490] NET: Registered protocol family 2 0.345842] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) 0.346036] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) 0.346387] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) 0.348046] TCP: Hash tables configured (established 131072 bind 65536) 0.348049] TCP reno registered 0.355320] NET: Registered protocol family 1 0.355407] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 0.507172] Switched to high resolution mode on CPU 0 0.597953]  it is 0.860913] Freeing initrd memory: 7341k freed 0.864914] audit: initializing netlink socket (disabled) 0.864914] type=2000 audit(1219950004.856:1): initialized 0.864914] highmem bounce pool size: 64 pages 0.864914] Total HugeTLB memory allocated, 0 0.864914] VFS: Disk quotas dquot_6.5.1 0.864914] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 0.864914] msgmni has been set to 1751 0.864914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) 0.864914] io scheduler noop registered 0.864914] io scheduler anticipatory registered 0.864914] io scheduler deadline registered 0.864914] io scheduler cfq registered (default) 0.864914] pci 0000:01:00.0: Boot video device 0.864914] PCI: Setting latency timer of device 0000:00:01.0 to 64 0.864914] assign_interrupt_mode Found MSI capability 0.864914] Allocate Port Service[0000:00:01.0:pcie00] 0.864914] Allocate Port Service[0000:00:01.0:pcie03] 0.864914] PCI: Setting latency timer of device 0000:00:1c.0 to 64 0.864914] assign_interrupt_mode Found MSI capability 0.864914] Allocate Port Service[0000:00:1c.0:pcie00] 0.864914] Allocate Port Service[0000:00:1c.0:pcie02] 0.864914] Allocate Port Service[0000:00:1c.0:pcie03] 0.864914] PCI: Setting latency timer of device 0000:00:1c.1 to 64 0.864914] assign_interrupt_mode Found MSI capability 0.864914] Allocate Port Service[0000:00:1c.1:pcie00] 0.864914] Allocate Port Service[0000:00:1c.1:pcie02] 0.864914] Allocate Port Service[0000:00:1c.1:pcie03] 0.864914] vesafb: framebuffer at 0x80000000, mapped to 0xf8880000, using 3072k, total 16384k 0.864914] vesafb: mode is 1024x768x16, linelength=2048, pages=9 0.864914] vesafb: protected mode interface info at c000:ad04 0.864914] vesafb: pmi: set display start = c00cad8c, set palette = c00cae48 0.864914] vesafb: scrolling: redraw 0.864914] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 0.888913] Console: switching to colour frame buffer device 128x48 0.912913] fb0: VESA VGA frame buffer device 0.912913] isapnp: Scanning for PnP cards... 1.221988] isapnp: No Plug & Play device found 1.224925] hpet_resources: 0xfed00000 is busy 1.224925] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 1.228914] brd: module loaded 1.228914] PNP: No PS/2 controller found. Probing ports directly. 1.228914] i8042.c: No controller found. 1.228914] mice: PS/2 mouse device common for all mice 1.228914] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 1.228914] rtc0: alarms up to one month, y3k 1.228914] cpuidle: using governor ladder 1.228914] cpuidle: using governor menu 1.228914] No iBFT detected. 1.229256] TCP cubic registered 1.229256] NET: Registered protocol family 17 1.229256] Using IPI No-Shortcut mode 1.229256] registered taskstats version 1 1.229256] rtc_cmos 00:08: setting system clock to 2008-08-28 19:00:06 UTC (1219950006) 1.229256] Freeing unused kernel memory: 244k freed 1.315243] ACPI: SSDT 7FEB8C10, 02AE (r1 APPLE   Cpu0Ist     3000 INTL 20050309) 1.315243] ACPI: SSDT 7FEB7C90, 0232 (r1 APPLE   Cpu0Cst     3001 INTL 20050309) 1.315243] Monitor-Mwait will be used to enter C-1 state 1.315243] Monitor-Mwait will be used to enter C-2 state 1.315243] ACPI: CPU0 (power states: C1[C1] C2[C2]) 1.315243] ACPI: ACPI0007:00 is registered as cooling_device0 1.315243] ACPI: Processor [CPU0] (supports 8 throttling states) 1.315243] ACPI: SSDT 7FEB8F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309) 1.315243] ACPI: SSDT 7FEB7F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309) 1.316321] ACPI: CPU1 (power states: C1[C1] C2[C2]) 1.316321] ACPI: ACPI0007:01 is registered as cooling_device1 1.316321] ACPI: Processor [CPU1] (supports 8 throttling states) 1.316321] Marking TSC unstable due to: TSC halts in idle. 1.486000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 1.486000] PCI: Setting latency timer of device 0000:02:00.0 to 64 1.486000] sky2 0000:02:00.0: v1.21 addr 0x90300000 irq 16 Yukon-EC (0xb6) rev 2 1.486000] sky2 eth0: addr 00:16:cb:95:8f:ed 1.514000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 1.514000] PCI: Setting latency timer of device 0000:03:00.0 to 64 1.522001] usbcore: registered new interface driver usbfs 1.522001] usbcore: registered new interface driver hub 1.522001] usbcore: registered new device driver usb 1.534783] USB Universal Host Controller Interface driver v3.0 1.535536] No dock devices found. 1.541436] SCSI subsystem initialized 1.576849] libata version 3.00 loaded. 1.582027] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 1.582027] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 1.582027] PCI: Setting latency timer of device 0000:00:1d.7 to 64 1.582027] ehci_hcd 0000:00:1d.7: EHCI Host Controller 1.582027] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 1.585935] ehci_hcd 0000:00:1d.7: debug port 1 1.585942] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 1.585954] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90505400 1.603590] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 1.603653] usb usb1: configuration #1 chosen from 1 choice 1.603678] hub 1-0:1.0: USB hub found 1.603683] hub 1-0:1.0: 8 ports detected 1.610025] udev: renamed network interface eth0 to eth1 1.706571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 1.706577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1.706582] usb usb1: Product: EHCI Host Controller 1.706585] usb usb1: Manufacturer: Linux 2.6.26-1-686 ehci_hcd 1.706589] usb usb1: SerialNumber: 0000:00:1d.7 1.710372] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 1.710372] PCI: Setting latency timer of device 0000:00:1d.0 to 64 1.710372] uhci_hcd 0000:00:1d.0: UHCI Host Controller 1.710372] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 1.710372] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 1.710372] usb usb2: configuration #1 chosen from 1 choice 1.710372] hub 2-0:1.0: USB hub found 1.710372] hub 2-0:1.0: 2 ports detected 1.813675] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 1.813681] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1.813685] usb usb2: Product: UHCI Host Controller 1.813689] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd 1.813693] usb usb2: SerialNumber: 0000:00:1d.0 1.814372] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 1.814372] PCI: Setting latency timer of device 0000:00:1d.1 to 64 1.814372] uhci_hcd 0000:00:1d.1: UHCI Host Controller 1.814372] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 1.814372] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080 1.814372] usb usb3: configuration #1 chosen from 1 choice 1.814372] hub 3-0:1.0: USB hub found 1.814372] hub 3-0:1.0: 2 ports detected 1.917678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 1.917684] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1.917688] usb usb3: Product: UHCI Host Controller 1.917692] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd 1.917696] usb usb3: SerialNumber: 0000:00:1d.1 1.918371] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 1.918371] PCI: Setting latency timer of device 0000:00:1d.2 to 64 1.918371] uhci_hcd 0000:00:1d.2: UHCI Host Controller 1.918371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 1.918371] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060 1.918371] usb usb4: configuration #1 chosen from 1 choice 1.918371] hub 4-0:1.0: USB hub found 1.918371] hub 4-0:1.0: 2 ports detected 2.021212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 2.021219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2.021223] usb usb4: Product: UHCI Host Controller 2.021227] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd 2.021231] usb usb4: SerialNumber: 0000:00:1d.2 2.022371] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 2.022371] PCI: Setting latency timer of device 0000:00:1d.3 to 64 2.022371] uhci_hcd 0000:00:1d.3: UHCI Host Controller 2.022371] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 2.022371] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 2.022371] usb usb5: configuration #1 chosen from 1 choice 2.022371] hub 5-0:1.0: USB hub found 2.022371] hub 5-0:1.0: 2 ports detected 2.125275] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 2.125281] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2.125285] usb usb5: Product: UHCI Host Controller 2.125289] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd 2.125293] usb usb5: SerialNumber: 0000:00:1d.3 2.126372] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 19 2.179396] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[90100000-901007ff]  Max Packet=[2048]  IR/IT contexts=[8/8] 2.187414] ata_piix 0000:00:1f.2: version 2.12 2.187414] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 2.187414] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] 2.191414] usb 1-4: new high speed USB device using ehci_hcd and address 3 2.197214] Uniform Multi-Platform E-IDE driver 2.197214] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 2.322971] usb 1-4: configuration #1 chosen from 1 choice 2.323285] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300 2.323291] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2.343366] PCI: Setting latency timer of device 0000:00:1f.2 to 64 2.347137] scsi0 : ata_piix 2.347142] scsi1 : ata_piix 2.347142] ata1: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 19 2.347142] ata2: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 19 2.557661] ata1.01: ATA-7: WDC WD2500JS-40TGB0, 20.06C04, max UDMA/133 2.557661] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) 2.571542] ata1.01: configured for UDMA/133 2.737388] scsi 0:0:1:0: Direct-Access     ATA      WDC WD2500JS-40T 20.0 PQ: 0 ANSI: 5 2.741195] ICH7: IDE controller (0x8086:0x27df rev 0x02) at  PCI slot 0000:00:1f.1 2.741195] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 2.741195] ICH7: not 100% native mode: will probe irqs later 2.741195]     ide0: BM-DMA at 0x30c0-0x30c7 2.741195]     ide1: BM-DMA at 0x30c8-0x30cf 2.741195] Probing IDE interface ide0... 2.760007] Driver 'sd' needs updating - please use bus_type methods 2.760007] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB) 2.760007] sd 0:0:1:0: [sda] Write Protect is off 2.760007] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 2.760007] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2.760007] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB) 2.760007] sd 0:0:1:0: [sda] Write Protect is off 2.760007] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 2.760007] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 2.760007]  sda: sda1 sda2 sda3 sda4 2.805952] sd 0:0:1:0: [sda] Attached SCSI disk 3.043130] usb 2-1: new full speed USB device using uhci_hcd and address 2 3.219212] usb 2-1: configuration #1 chosen from 1 choice 3.221775] hub 2-1:1.0: USB hub found 3.227575] hub 2-1:1.0: 3 ports detected 3.334930] usb 2-1: New USB device found, idVendor=05ac, idProduct=1003 3.334936] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 3.334941] usb 2-1: Product: Hub in Apple Extended USB Keyboard 3.334945] usb 2-1: Manufacturer: Mitsumi Electric 3.463147] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0017f2fffe735b20] 3.480555] hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive 3.701534] usb 5-1: new full speed USB device using uhci_hcd and address 2 3.814310] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 3.814606] hda: UDMA/66 mode selected 3.814939] Probing IDE interface ide1... 3.885128] usb 5-1: configuration #1 chosen from 1 choice 3.888837] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 3.888843] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 4.123817] usb 5-2: new full speed USB device using uhci_hcd and address 3 4.306220] usb 5-2: configuration #1 chosen from 1 choice 4.308887] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240 4.308890] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 4.308892] usb 5-2: Product: IR Receiver 4.308894] usb 5-2: Manufacturer: Apple Computer, Inc. 4.385472] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 4.385503] ide1 at 0x170-0x177,0x376 on irq 15 4.402830] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache 4.402830] Uniform CD-ROM driver Revision: 3.20 4.517315] usb 2-1.2: new low speed USB device using uhci_hcd and address 3 4.658181] usb 2-1.2: configuration #1 chosen from 1 choice 4.660949] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=0304 4.660952] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 4.660954] usb 2-1.2: Product: Apple Optical USB Mouse 4.660956] usb 2-1.2: Manufacturer: Mitsumi Electric 4.864321] usb 2-1.3: new full speed USB device using uhci_hcd and address 4 5.004174] usb 2-1.3: configuration #1 chosen from 1 choice 5.007806] usb 2-1.3: New USB device found, idVendor=05ac, idProduct=020c 5.007809] usb 2-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 5.007811] usb 2-1.3: Product: Apple Extended USB Keyboard 5.007813] usb 2-1.3: Manufacturer: Mitsumi Electric 5.012339] usbcore: registered new interface driver hiddev 5.027824] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint 5.032520] hiddev96hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2 5.046792] input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input0 5.046958] input,hidraw1: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1d.0-1.2 5.054766] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1 5.055192] input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 5.059988] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2 5.060111] input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3 5.060140] usbcore: registered new interface driver usbhid 5.060145] usbhid: v2.6:USB HID core driver 5.125687] ReiserFS: sda4: found reiserfs format "3.6" with standard journal 5.125687] ReiserFS: sda4: using ordered data mode 5.135395] ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 5.135395] ReiserFS: sda4: checking transaction log (sda4) 5.167338] ReiserFS: sda4: Using r5 hash to sort names 6.833173] udevd version 125 started 7.344983] Linux agpgart interface v0.103 7.369251] input: Power Button (FF) as /class/input/input3 7.423839] ACPI: Power Button (FF) [PWRF] 7.423892] input: Power Button (CM) as /class/input/input4 7.487814] ACPI: Power Button (CM) [PWRB] 7.488404] input: Video Bus as /class/input/input5 7.548074] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no) 7.802577] firmware: requesting isight.fw 7.822577] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 7.835718] input: PC Speaker as /class/input/input6 7.841383] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) 7.893383] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) 7.893383] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 7.950499] usbcore: registered new interface driver isight_firmware 7.954500] Error: Driver 'pcspkr' is already registered, aborting... 7.969796] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 7.969796] PCI: Setting latency timer of device 0000:00:1b.0 to 64 8.004008] hda_codec: STAC922x, Apple subsys_id=106b1700 16.244544] loop: module loaded 16.286858] Linux video capture interface: v2.00 16.302961] usbcore: registered new interface driver uvcvideo 16.302961] USB Video Class driver (v0.1.0) 16.330141] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) 16.382581] usbcore: registered new interface driver ndiswrapper 16.455710] device-mapper: uevent: version 1.0.3 16.455710] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com 16.654511] fuse init (API version 7.9) 16.747382] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. 16.865550] NTFS driver 2.1.29 [Flags: R/W MODULE]. 16.929674] NTFS volume version 3.1. 16.929674] NTFS-fs warning (device sda3): load_system_files(): Unsupported volume flags 0x4000 encountered. 16.929674] NTFS-fs error (device sda3): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows. 17.676330] ip_tables: (C) 2000-2006 Netfilter Core Team 18.803065] sky2 eth1: enabling interface 21.631446] NET: Registered protocol family 10 21.631446] lo: Disabled Privacy Extensions 21.631446] ADDRCONF(NETDEV_UP): eth1: link is not ready 21.911790] lp: driver loaded but no devices found 21.925994] ppdev: user-space parallel port driver 23.828932] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) 24.900593] usb 1-4: USB disconnect, address 3 25.295700] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 25.339341] usb 5-1: USB disconnect, address 2 25.347701] Bluetooth: Core ver 2.11 25.347701] NET: Registered protocol family 31 25.347701] Bluetooth: HCI device and connection manager initialized 25.347701] Bluetooth: HCI socket layer initialized 25.395379] Bluetooth: L2CAP ver 2.9 25.395379] Bluetooth: L2CAP socket layer initialized 25.399371] Bluetooth: RFCOMM socket layer initialized 25.399371] Bluetooth: RFCOMM TTY layer initialized 25.399371] Bluetooth: RFCOMM ver 1.8 26.081274] usb 5-1: new full speed USB device using uhci_hcd and address 4 26.276325] usb 5-1: configuration #1 chosen from 1 choice 26.287010] usb 5-1: New USB device found, idVendor=05ac, idProduct=8206 26.287010] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 26.338782] Bluetooth: HCI USB driver ver 2.9 26.340037] usbcore: registered new interface driver hci_usb 27.357134] usb 1-4: new high speed USB device using ehci_hcd and address 7 27.491262] usb 1-4: configuration #1 chosen from 1 choice 27.491412] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) 27.494546] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). 27.496136] input: Built-in iSight as /class/input/input7 27.517096] usb 1-4: New USB device found, idVendor=05ac, idProduct=8501 27.517101] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 27.517103] usb 1-4: Product: Built-in iSight 27.517105] usb 1-4: Manufacturer: Micron 27.860044] ACPI: PCI interrupt for device 0000:03:00.0 disabled 27.860547] usbcore: deregistering interface driver ndiswrapper 27.879978] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) 27.937604] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded 27.938818] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 27.938818] PCI: Setting latency timer of device 0000:03:00.0 to 64 27.951527] ndiswrapper: using IRQ 17 28.194961] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf 28.194961] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 28.198961] usbcore: registered new interface driver ndiswrapper 28.210433] ADDRCONF(NETDEV_UP): wlan0: link is not ready 28.266737] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver 42.773120] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 53.149971] wlan0: no IPv6 routers present 84.706662] ndiswrapper: device wlan0 removed 84.706662] ACPI: PCI interrupt for device 0000:03:00.0 disabled 84.706662] usbcore: deregistering interface driver ndiswrapper 84.747081] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) 84.763411] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded 84.763411] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 84.763411] PCI: Setting latency timer of device 0000:03:00.0 to 64 84.779795] ndiswrapper: using IRQ 17 85.019495] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf 85.019536] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 85.022077] usbcore: registered new interface driver ndiswrapper 85.043756] ADDRCONF(NETDEV_UP): wlan0: link is not ready 85.050357] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver 93.636355] ndiswrapper: device wlan0 removed 93.636372] ACPI: PCI interrupt for device 0000:03:00.0 disabled 93.636440] usbcore: deregistering interface driver ndiswrapper 93.668198] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) 93.690362] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded 93.690525] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 93.690563] PCI: Setting latency timer of device 0000:03:00.0 to 64 93.705821] ndiswrapper: using IRQ 17 93.946187] wlan0: ethernet device 00:17:f2:96:f9:18 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf 93.946187] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK

2.6.29-2-amd64:

[    0.000000] Initializing cgroup subsys cpuset 0.000000] Initializing cgroup subsys cpu 0.000000] Linux version 2.6.29-2-amd64 (Debian 2.6.29-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 11:38:27 UTC 2009 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29-2-amd64 root=UUID=75e04b32-55c6-4156-beff-e4c2bb7d679d ro splash vga=795 quiet 0.000000] KERNEL supported cpus: 0.000000]   Intel GenuineIntel 0.000000]   AMD AuthenticAMD 0.000000]   Centaur CentaurHauls 0.000000] BIOS-provided physical RAM map: 0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) 0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) 0.000000]  BIOS-e820: 0000000000100000 - 000000007f0b9000 (usable) 0.000000]  BIOS-e820: 000000007f0b9000 - 000000007f2ba000 (ACPI NVS) 0.000000]  BIOS-e820: 000000007f2ba000 - 000000007febe000 (ACPI data) 0.000000]  BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS) 0.000000]  BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data) 0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) 0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) 0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) 0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) 0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) 0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) 0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 0.000000] DMI 2.4 present. 0.000000] last_pfn = 0x7f0b9 max_arch_pfn = 0x100000000 0.000000] init_memory_mapping: 0000000000000000-000000007f0b9000 0.000000]  0000000000 - 007f000000 page 2M 0.000000]  007f000000 - 007f0b9000 page 4k 0.000000] kernel direct mapping tables up to 7f0b9000 @ 8000-c000 0.000000] last_map_addr: 7f0b9000 end: 7f0b9000 0.000000] RAMDISK: 37c34000 - 37fef063 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) 0.000000] ACPI: XSDT 7FEFD1C0, 0074 (r1 APPLE   Apple00       90       1000013) 0.000000] ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       90 Loki       5F) 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) 0.000000] ACPI: DSDT 7FEF0000, 3CEA (r1 APPLE   iMac5,1    10001 INTL 20050309) 0.000000] ACPI: FACS 7FEC0000, 0040 0.000000] ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: ASF! 7FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: SBST 7FEF5000, 0030 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: ECDT 7FEF4000, 0053 (r1 APPLE   Apple00        1 Loki       5F) 0.000000] ACPI: SSDT 7FEBB000, 064F (r1 APPLE   SataPri     1000 INTL 20050309) 0.000000] ACPI: SSDT 7FEBA000, 069C (r1 APPLE   SataSec     1000 INTL 20050309) 0.000000] ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309) 0.000000] ACPI: Local APIC address 0xfee00000 0.000000] No NUMA configuration found 0.000000] Faking a node at 0000000000000000-000000007f0b9000 0.000000] Bootmem setup node 0 0000000000000000-000000007f0b9000 0.000000]   NODE_DATA [000000000000a000 - 0000000000011fff] 0.000000]   bootmap [0000000000012000 -  0000000000021e17] pages 10 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007f0b9000] 0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000] 0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000] 0.000000]   #2 [0000200000 - 00007ed74c]    TEXT DATA BSS ==> [0000200000 - 00007ed74c] 0.000000]   #3 [0037c34000 - 0037fef063]          RAMDISK ==> [0037c34000 - 0037fef063] 0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000] 0.000000]   #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000] 0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 0.000000] Zone PFN ranges: 0.000000]   DMA      0x00000000 -> 0x00001000 0.000000]   DMA32    0x00001000 -> 0x00100000 0.000000]   Normal   0x00100000 -> 0x00100000 0.000000] Movable zone start PFN for each node 0.000000] early_node_map[2] active PFN ranges 0.000000]     0: 0x00000000 -> 0x0000009f 0.000000]     0: 0x00000100 -> 0x0007f0b9 0.000000] On node 0 totalpages: 520280 0.000000]   DMA zone: 56 pages used for memmap 0.000000]   DMA zone: 1618 pages reserved 0.000000]   DMA zone: 2325 pages, LIFO batch:0 0.000000]   DMA32 zone: 7059 pages used for memmap 0.000000]   DMA32 zone: 509222 pages, LIFO batch:31 0.000000] ACPI: PM-Timer IO Port: 0x408 0.000000] ACPI: Local APIC address 0xfee00000 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 0.000000] ACPI: IRQ0 used by override. 0.000000] ACPI: IRQ2 used by override. 0.000000] ACPI: IRQ9 used by override. 0.000000] Using ACPI (MADT) for SMP configuration information 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs 0.000000] nr_irqs_gsi: 24 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 0.000000] PERCPU: Allocating 53248 bytes of per cpu data 0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511547 0.000000] Policy zone: DMA32 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29-2-amd64 root=UUID=75e04b32-55c6-4156-beff-e4c2bb7d679d ro splash vga=795 quiet 0.000000] Initializing CPU#0 0.000000] Experimental hierarchical RCU implementation. 0.000000] Experimental hierarchical RCU init done. 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) 0.000000] Extended CMOS year: 2000 0.000000] Fast TSC calibration using PIT 0.000000] Detected 2163.863 MHz processor. 0.004000] Console: colour dummy device 80x25 0.004000] console [tty0] enabled 0.004000] Checking aperture... 0.004000] No AGP bridge found 0.004000] Calgary: detecting Calgary via BIOS EBDA area 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! 0.004000] Memory: 2042264k/2081508k available (2546k kernel code, 388k absent, 38856k reserved, 1320k data, 552k init) 0.004000] hpet clockevent registered 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4327.72 BogoMIPS (lpj=8655452) 0.004000] Security Framework initialized 0.004000] SELinux:  Disabled at boot. 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) 0.004000] Mount-cache hash table entries: 256 0.004000] Initializing cgroup subsys ns 0.004000] Initializing cgroup subsys cpuacct 0.004000] Initializing cgroup subsys devices 0.004000] Initializing cgroup subsys freezer 0.004000] Initializing cgroup subsys net_cls 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K 0.004000] CPU: L2 cache: 4096K 0.004000] CPU 0/0x0 -> Node 0 0.004000] CPU: Physical Processor ID: 0 0.004000] CPU: Processor Core ID: 0 0.004000] CPU0: Thermal monitoring enabled (TM2) 0.004000] using mwait in idle threads. 0.004759] ACPI: Core revision 20081204 0.012320] Setting APIC routing to flat 0.012714] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 0.052410] CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06 0.056001] Booting processor 1 APIC 0x1 ip 0x6000 0.004000] Initializing CPU#1 0.004000] Calibrating delay using timer specific routine.. 4327.53 BogoMIPS (lpj=8655071) 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K 0.004000] CPU: L2 cache: 4096K 0.004000] CPU 1/0x1 -> Node 0 0.004000] CPU: Physical Processor ID: 0 0.004000] CPU: Processor Core ID: 1 0.004000] CPU1: Thermal monitoring enabled (TM2) 0.140653] CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06 0.140676] checking TSC synchronization [CPU#0 -> CPU#1]: passed. 0.144046] Brought up 2 CPUs 0.144049] Total of 2 processors activated (8655.26 BogoMIPS). 0.144119] CPU0 attaching sched-domain: 0.144122]  domain 0: span 0-1 level MC 0.144124]   groups: 0 1 0.144128] CPU1 attaching sched-domain: 0.144130]  domain 0: span 0-1 level MC 0.144132]   groups: 1 0 0.144192] net_namespace: 1888 bytes 0.144192] Booting paravirtualized kernel on bare hardware 0.144226] regulator: core version 0.5 0.144237] NET: Registered protocol family 16 0.144237] ACPI: bus type pci registered 0.144237] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 0.144237] PCI: MCFG area at e0000000 reserved in E820 0.154174] PCI: Using MMCONFIG at e0000000 - efffffff 0.154176] PCI: Using configuration type 1 for base access 0.154191] bio: create slab <bio-0> at 0 0.156361] ACPI: EC: EC description table is found, configuring boot EC 0.158505] ACPI: BIOS _OSI(Linux) query ignored 0.158961] ACPI: Interpreter enabled 0.158964] ACPI: (supports S0 S3 S4 S5) 0.158985] ACPI: Using IOAPIC for interrupt routing 0.161547] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 0.161547] ACPI: EC: driver started in poll mode 0.161547] ACPI: No dock devices found. 0.161547] ACPI: PCI Root Bridge [PCI0] (0000:00) 0.164051] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold 0.164054] pci 0000:00:01.0: PME# disabled 0.164078] pci 0000:00:07.0: reg 10 32bit mmio: [0x90504000-0x90504fff] 0.164166] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90500000-0x90503fff] 0.164236] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold 0.164240] pci 0000:00:1b.0: PME# disabled 0.164320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold 0.164324] pci 0000:00:1c.0: PME# disabled 0.164407] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold 0.164411] pci 0000:00:1c.1: PME# disabled 0.164472] pci 0000:00:1d.0: reg 20 io port: [0x30a0-0x30bf] 0.164533] pci 0000:00:1d.1: reg 20 io port: [0x3080-0x309f] 0.164594] pci 0000:00:1d.2: reg 20 io port: [0x3060-0x307f] 0.164656] pci 0000:00:1d.3: reg 20 io port: [0x3040-0x305f] 0.164707] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90505400-0x905057ff] 0.164786] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold 0.164791] pci 0000:00:1d.7: PME# disabled 0.164953] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO 0.164957] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO 0.164961] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) 0.164964] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) 0.164970] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) 0.165017] pci 0000:00:1f.1: reg 10 io port: [0x30e8-0x30ef] 0.165024] pci 0000:00:1f.1: reg 14 io port: [0x30fc-0x30ff] 0.165031] pci 0000:00:1f.1: reg 18 io port: [0x30e0-0x30e7] 0.165039] pci 0000:00:1f.1: reg 1c io port: [0x30f8-0x30fb] 0.165046] pci 0000:00:1f.1: reg 20 io port: [0x30c0-0x30cf] 0.165091] pci 0000:00:1f.2: reg 10 io port: [0x30d8-0x30df] 0.165098] pci 0000:00:1f.2: reg 14 io port: [0x30f4-0x30f7] 0.165105] pci 0000:00:1f.2: reg 18 io port: [0x30d0-0x30d7] 0.165112] pci 0000:00:1f.2: reg 1c io port: [0x30f0-0x30f3] 0.165119] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x302f] 0.165127] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90505000-0x905053ff] 0.165166] pci 0000:00:1f.2: PME# supported from D3hot 0.165170] pci 0000:00:1f.2: PME# disabled 0.165226] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] 0.165283] pci 0000:01:00.0: reg 10 32bit mmio: [0x80000000-0x8fffffff] 0.165291] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] 0.165299] pci 0000:01:00.0: reg 18 32bit mmio: [0x90400000-0x9040ffff] 0.165317] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] 0.165342] pci 0000:01:00.0: supports D1 D2 0.165397] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] 0.165400] pci 0000:00:01.0: bridge 32bit mmio: [0x90400000-0x904fffff] 0.165404] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff] 0.165461] pci 0000:02:00.0: reg 10 64bit mmio: [0x90300000-0x90303fff] 0.165471] pci 0000:02:00.0: reg 18 io port: [0x1000-0x10ff] 0.165505] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] 0.165578] pci 0000:02:00.0: supports D1 D2 0.165579] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold 0.165585] pci 0000:02:00.0: PME# disabled 0.165645] pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff] 0.165649] pci 0000:00:1c.0: bridge 32bit mmio: [0x90300000-0x903fffff] 0.165708] pci 0000:03:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff] 0.165726] pci 0000:03:00.0: reg 18 64bit mmio: [0x90000000-0x900fffff] 0.165813] pci 0000:03:00.0: supports D1 D2 0.165885] pci 0000:00:1c.1: bridge 32bit mmio: [0x90200000-0x902fffff] 0.165892] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x90000000-0x900fffff] 0.165927] pci 0000:04:03.0: reg 10 32bit mmio: [0x90100000-0x90100fff] 0.165999] pci 0000:04:03.0: supports D1 D2 0.166000] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot 0.166005] pci 0000:04:03.0: PME# disabled 0.166062] pci 0000:00:1e.0: transparent bridge 0.166069] pci 0000:00:1e.0: bridge 32bit mmio: [0x90100000-0x901fffff] 0.166102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 0.166299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] 0.166377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] 0.166452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] 0.166538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] 0.172366] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 0.172366] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) 0.172366] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 0.172385] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) 0.172484] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. 0.172584] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. 0.172683] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) 0.172784] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) 0.172831] usbcore: registered new interface driver usbfs 0.172831] usbcore: registered new interface driver hub 0.172831] usbcore: registered new device driver usb 0.172831] PCI: Using ACPI for IRQ routing 0.180029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 0.180033] hpet0: 3 comparators, 64-bit 14.318180 MHz counter 0.192005] pnp: PnP ACPI init 0.192013] ACPI: bus type pnp registered 0.193621] pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7 (0x1000-0x1fff), disabling 0.193793] pnp: PnP ACPI: found 9 devices 0.193794] ACPI: ACPI bus type pnp unregistered 0.193803] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved 0.193806] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved 0.193808] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved 0.193811] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved 0.193813] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved 0.193815] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved 0.193822] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved 0.193827] system 00:07: ioport range 0x680-0x6ef has been reserved 0.193830] system 00:07: ioport range 0x800-0x80f has been reserved 0.193832] system 00:07: ioport range 0x810-0x817 has been reserved 0.193834] system 00:07: ioport range 0x400-0x47f has been reserved 0.193836] system 00:07: ioport range 0x500-0x53f has been reserved 0.198888] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 0.198891] pci 0000:00:01.0:   IO window: 0x2000-0x2fff 0.198895] pci 0000:00:01.0:   MEM window: 0x90400000-0x904fffff 0.198898] pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x0000008fffffff 0.198903] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 0.198906] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff 0.198912] pci 0000:00:1c.0:   MEM window: 0x90300000-0x903fffff 0.198916] pci 0000:00:1c.0:   PREFETCH window: 0x00000090600000-0x000000906fffff 0.198924] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 0.198925] pci 0000:00:1c.1:   IO window: disabled 0.198931] pci 0000:00:1c.1:   MEM window: 0x90200000-0x902fffff 0.198936] pci 0000:00:1c.1:   PREFETCH window: 0x00000090000000-0x000000900fffff 0.198943] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 0.198945] pci 0000:00:1e.0:   IO window: disabled 0.198950] pci 0000:00:1e.0:   MEM window: 0x90100000-0x901fffff 0.198955] pci 0000:00:1e.0:   PREFETCH window: disabled 0.198967]   alloc irq_desc for 16 on cpu 0 node 0 0.198969]   alloc kstat_irqs on cpu 0 node 0 0.198973] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 0.198976] pci 0000:00:01.0: setting latency timer to 64 0.198984]   alloc irq_desc for 17 on cpu 0 node 0 0.198985]   alloc kstat_irqs on cpu 0 node 0 0.198990] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 0.198994] pci 0000:00:1c.0: setting latency timer to 64 0.199002] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 0.199007] pci 0000:00:1c.1: setting latency timer to 64 0.199072] pci 0000:00:1e.0: power state changed by ACPI to D0 0.199078] pci 0000:00:1e.0: setting latency timer to 64 0.199082] pci_bus 0000:00: resource 0 io:  [0x00-0xffff] 0.199084] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] 0.199086] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff] 0.199088] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff] 0.199090] pci_bus 0000:01: resource 2 mem: [0x80000000-0x8fffffff] 0.199092] pci_bus 0000:01: resource 3 mem: [0x0-0x0] 0.199094] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff] 0.199095] pci_bus 0000:02: resource 1 mem: [0x90300000-0x903fffff] 0.199097] pci_bus 0000:02: resource 2 mem: [0x90600000-0x906fffff] 0.199099] pci_bus 0000:02: resource 3 mem: [0x0-0x0] 0.199101] pci_bus 0000:03: resource 0 mem: [0x0-0x0] 0.199102] pci_bus 0000:03: resource 1 mem: [0x90200000-0x902fffff] 0.199104] pci_bus 0000:03: resource 2 mem: [0x90000000-0x900fffff] 0.199106] pci_bus 0000:03: resource 3 mem: [0x0-0x0] 0.199108] pci_bus 0000:04: resource 0 mem: [0x0-0x0] 0.199110] pci_bus 0000:04: resource 1 mem: [0x90100000-0x901fffff] 0.199111] pci_bus 0000:04: resource 2 mem: [0x0-0x0] 0.199113] pci_bus 0000:04: resource 3 io:  [0x00-0xffff] 0.199115] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] 0.199171] NET: Registered protocol family 2 0.236112] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) 0.236895] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) 0.238986] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) 0.239773] TCP: Hash tables configured (established 262144 bind 65536) 0.239775] TCP reno registered 0.248127] NET: Registered protocol family 1 0.248239] checking if image is initramfs... it is 0.500700] Switched to high resolution mode on CPU 1 0.503983] Switched to high resolution mode on CPU 0 0.509684] Freeing initrd memory: 3820k freed 0.511965] audit: initializing netlink socket (disabled) 0.511982] type=2000 audit(1241884425.509:1): initialized 0.512272] HugeTLB registered 2 MB page size, pre-allocated 0 pages 0.512406] VFS: Disk quotas dquot_6.5.2 0.512440] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 0.512500] msgmni has been set to 3996 0.512634] alg: No test for stdrng (krng) 0.512694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) 0.512697] io scheduler noop registered 0.512699] io scheduler anticipatory registered 0.512700] io scheduler deadline registered 0.512723] io scheduler cfq registered (default) 0.512841] pci 0000:01:00.0: Boot video device 0.512954] pcieport-driver 0000:00:01.0: setting latency timer to 64 0.513002]   alloc irq_desc for 24 on cpu 0 node 0 0.513005]   alloc kstat_irqs on cpu 0 node 0 0.513013] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X 0.513132] pcieport-driver 0000:00:1c.0: setting latency timer to 64 0.513203]   alloc irq_desc for 25 on cpu 0 node 0 0.513205]   alloc kstat_irqs on cpu 0 node 0 0.513211] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X 0.513393] pcieport-driver 0000:00:1c.1: setting latency timer to 64 0.513464]   alloc irq_desc for 26 on cpu 0 node 0 0.513465]   alloc kstat_irqs on cpu 0 node 0 0.513471] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X 0.514155] vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010980000, using 10240k, total 16384k 0.514157] vesafb: mode is 1280x1024x32, linelength=5120, pages=2 0.514159] vesafb: scrolling: redraw 0.514161] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 0.593657] Console: switching to colour frame buffer device 160x64 0.672934] fb0: VESA VGA frame buffer device 0.675925] Linux agpgart interface v0.103 0.675928] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 0.677922] brd: module loaded 0.677988] input: Macintosh mouse button emulation as /devices/virtual/input/input0 0.678202] PNP: No PS/2 controller found. Probing ports directly. 0.679053] i8042.c: No controller found. 0.684150] mice: PS/2 mouse device common for all mice 0.684222] rtc_cmos 00:08: RTC can wake from S4 0.684280] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 0.684316] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs 0.684350] cpuidle: using governor ladder 0.684351] cpuidle: using governor menu 0.684356] No iBFT detected. 0.684641] TCP cubic registered 0.684644] NET: Registered protocol family 17 0.684784] registered taskstats version 1 0.684920] rtc_cmos 00:08: setting system clock to 2009-05-09 15:53:45 UTC (1241884425) 0.684969] Freeing unused kernel memory: 552k freed 0.730230] SCSI subsystem initialized 0.740703] libata version 3.00 loaded. 0.742537] ata_piix 0000:00:1f.2: version 2.12 0.742556]   alloc irq_desc for 19 on cpu 0 node 0 0.742558]   alloc kstat_irqs on cpu 0 node 0 0.742565] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 0.742570] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] 0.896016] ata_piix 0000:00:1f.2: setting latency timer to 64 0.896072] scsi0 : ata_piix 0.896210] scsi1 : ata_piix 0.897268] ata1: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 19 0.897270] ata2: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 19 1.100058] ata1.01: ATA-7: WDC WD2500JS-40TGB0, 20.06C04, max UDMA/133 1.100060] ata1.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) 1.108757] ata1.01: configured for UDMA/133 1.108784] isa bounce pool size: 16 pages 1.108848] scsi 0:0:1:0: Direct-Access     ATA      WDC WD2500JS-40T 20.0 PQ: 0 ANSI: 5 1.282490] Uniform Multi-Platform E-IDE driver 1.290975] device-mapper: uevent: version 1.0.3 1.291066] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com 1.312996] ACPI: SSDT 7FEB8C10, 02AE (r1 APPLE   Cpu0Ist     3000 INTL 20050309) 1.313312] ACPI: SSDT 7FEB7C90, 0232 (r1 APPLE   Cpu0Cst     3001 INTL 20050309) 1.313552] Monitor-Mwait will be used to enter C-1 state 1.313558] Monitor-Mwait will be used to enter C-2 state 1.313699] ACPI: CPU0 (power states: C1[C1] C2[C2]) 1.313751] processor ACPI_CPU:00: registered as cooling_device0 1.313755] ACPI: Processor [CPU0] (supports 8 throttling states) 1.314117] ACPI: SSDT 7FEB8F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309) 1.314377] ACPI: SSDT 7FEB7F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309) 1.314686] Marking TSC unstable due to TSC halts in idle 1.314854] ACPI: CPU1 (power states: C1[C1] C2[C2]) 1.314913] processor ACPI_CPU:01: registered as cooling_device1 1.314916] ACPI: Processor [CPU1] (supports 8 throttling states) 1.373623] Driver 'sd' needs updating - please use bus_type methods 1.373726] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) 1.373740] sd 0:0:1:0: [sda] Write Protect is off 1.373743] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 1.373763] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 1.373819] sd 0:0:1:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) 1.373831] sd 0:0:1:0: [sda] Write Protect is off 1.373833] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 1.373854] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 1.373857]  sda: sda1 sda2 sda3 sda4 1.422693] sd 0:0:1:0: [sda] Attached SCSI disk 2.341378] kjournald starting.  Commit interval 5 seconds 2.341403] EXT3-fs: mounted filesystem with ordered data mode. 4.229534] udev: starting version 141 4.847744] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 4.856046] ACPI: Power Button (FF) [PWRF] 4.856160] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 4.864039] ACPI: Power Button (CM) [PWRB] 5.442851] sky2 driver version 1.22 5.442907] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 5.442921] sky2 0000:02:00.0: setting latency timer to 64 5.442967] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 5.475001] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller 5.475004]  Part Number: Yukon 88E8053 5.475005]  Engineering Level: Rev. 2.2 5.475007]  Manufacturer: Marvell 5.475068]   alloc irq_desc for 27 on cpu 0 node 0 5.475070]   alloc kstat_irqs on cpu 0 node 0 5.475082] sky2 0000:02:00.0: irq 27 for MSI/MSI-X 5.475411] sky2 eth0: addr 00:16:cb:95:8f:ed 5.698114] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) 5.698200] PIIX_IDE 0000:00:1f.1: power state changed by ACPI to D0 5.698210]   alloc irq_desc for 18 on cpu 0 node 0 5.698212]   alloc kstat_irqs on cpu 0 node 0 5.698218] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 5.698239] piix 0000:00:1f.1: not 100% native mode: will probe irqs later 5.698245]     ide0: BM-DMA at 0x30c0-0x30c7 5.698253]     ide1: BM-DMA at 0x30c8-0x30cf 5.698258] Probing IDE interface ide0... 5.930279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 6.346177] input: PC Speaker as /devices/platform/pcspkr/input/input3 6.432394] hda: MATSHITADVD-R UJ-846, ATAPI CD/DVD-ROM drive 6.587835] intel_rng: FWH not detected 6.694350] uhci_hcd: USB Universal Host Controller Interface driver 6.738196] applesmc: Apple iMac 5 detected: 6.738198] applesmc:  - Model without accelerometer 6.738199] applesmc:  - Model without light sensors and backlight 6.738201] applesmc:  - Model with 7 temperature sensors 6.738243] applesmc: device successfully initialized. 6.738784] applesmc: 3 fans found. 6.738824] applesmc: driver successfully loaded. 6.768110] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 6.768405] hda: UDMA/66 mode selected 6.768741] Probing IDE interface ide1... 7.336113] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 7.338643] ide1 at 0x170-0x177,0x376 on irq 15 7.338717] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 7.408025] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0 7.408073] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 7.408081] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 7.460722] ide-cd driver 5.00 7.461797] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache 7.461808] Uniform CD-ROM driver Revision: 3.20 7.476135] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 7.476158]   alloc irq_desc for 23 on cpu 0 node 0 7.476163]   alloc kstat_irqs on cpu 0 node 0 7.476173] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 7.476216] ehci_hcd 0000:00:1d.7: setting latency timer to 64 7.476222] ehci_hcd 0000:00:1d.7: EHCI Host Controller 7.476347] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 7.480275] ehci_hcd 0000:00:1d.7: debug port 1 7.480282] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported 7.480297] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90505400 7.496068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 7.496124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 7.496129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7.496134] usb usb1: Product: EHCI Host Controller 7.496137] usb usb1: Manufacturer: Linux 2.6.29-2-amd64 ehci_hcd 7.496141] usb usb1: SerialNumber: 0000:00:1d.7 7.496245] usb usb1: configuration #1 chosen from 1 choice 7.496300] hub 1-0:1.0: USB hub found 7.496312] hub 1-0:1.0: 8 ports detected 7.496684] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 7.496688] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] 7.496690] ACPI: Device needs an ACPI driver 7.496837] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 7.496844] uhci_hcd 0000:00:1d.0: setting latency timer to 64 7.496847] uhci_hcd 0000:00:1d.0: UHCI Host Controller 7.496897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 7.496926] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 7.496965] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 7.496967] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7.496969] usb usb2: Product: UHCI Host Controller 7.496971] usb usb2: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd 7.496972] usb usb2: SerialNumber: 0000:00:1d.0 7.497015] usb usb2: configuration #1 chosen from 1 choice 7.497040] hub 2-0:1.0: USB hub found 7.497046] hub 2-0:1.0: 2 ports detected 7.497157]   alloc irq_desc for 22 on cpu 0 node 0 7.497159]   alloc kstat_irqs on cpu 0 node 0 7.497165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 7.497207] HDA Intel 0000:00:1b.0: setting latency timer to 64 7.585703] hda_codec: STAC922x, Apple subsys_id=106b1700 7.628943] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input4 7.636105] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input5 7.652870] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 7.652881] uhci_hcd 0000:00:1d.1: setting latency timer to 64 7.652885] uhci_hcd 0000:00:1d.1: UHCI Host Controller 7.652938] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 7.652969] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080 7.653010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 7.653012] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7.653014] usb usb3: Product: UHCI Host Controller 7.653016] usb usb3: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd 7.653017] usb usb3: SerialNumber: 0000:00:1d.1 7.653062] usb usb3: configuration #1 chosen from 1 choice 7.653089] hub 3-0:1.0: USB hub found 7.653096] hub 3-0:1.0: 2 ports detected 7.653196] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 7.653202] uhci_hcd 0000:00:1d.2: setting latency timer to 64 7.653205] uhci_hcd 0000:00:1d.2: UHCI Host Controller 7.653244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 7.653283] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060 7.653317] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 7.653319] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7.653321] usb usb4: Product: UHCI Host Controller 7.653322] usb usb4: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd 7.653324] usb usb4: SerialNumber: 0000:00:1d.2 7.653362] usb usb4: configuration #1 chosen from 1 choice 7.653386] hub 4-0:1.0: USB hub found 7.653391] hub 4-0:1.0: 2 ports detected 7.653482] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 7.653489] uhci_hcd 0000:00:1d.3: setting latency timer to 64 7.653492] uhci_hcd 0000:00:1d.3: UHCI Host Controller 7.653535] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 7.653569] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 7.653607] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 7.653609] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7.653611] usb usb5: Product: UHCI Host Controller 7.653612] usb usb5: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd 7.653614] usb usb5: SerialNumber: 0000:00:1d.3 7.653652] usb usb5: configuration #1 chosen from 1 choice 7.653676] hub 5-0:1.0: USB hub found 7.653681] hub 5-0:1.0: 2 ports detected 7.908161] firewire_core: created device fw0: GUID 0017f2fffe735b20, S400 7.921064] usb 1-3: new high speed USB device using ehci_hcd and address 3 9.883710] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 9.883972] EXT3 FS on sda3, internal journal 10.125688] usb 1-3: New USB device found, idVendor=058f, idProduct=6390 10.125691] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 10.125693] usb 1-3: Product: USB TO IDE Bridge 10.125695] usb 1-3: Manufacturer: Generic 10.125778] usb 1-3: configuration #1 chosen from 1 choice 10.227904] Initializing USB Mass Storage driver... 10.240040] usb 1-4: new high speed USB device using ehci_hcd and address 4 10.241049] scsi2 : SCSI emulation for USB Mass Storage devices 10.241205] usbcore: registered new interface driver usb-storage 10.241208] USB Mass Storage support registered. 10.241718] usb-storage: device found at 3 10.241720] usb-storage: waiting for device to settle before scanning 10.372820] usb 1-4: New USB device found, idVendor=05ac, idProduct=8501 10.372822] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 10.372824] usb 1-4: Product: Built-in iSight 10.372826] usb 1-4: Manufacturer: Micron 10.372894] usb 1-4: configuration #1 chosen from 1 choice 10.472949] Linux video capture interface: v2.00 10.508848] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) 10.511204] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. 10.511628] usbcore: registered new interface driver uvcvideo 10.511631] USB Video Class driver (v0.1.0) 10.840047] usb 2-1: new full speed USB device using uhci_hcd and address 2 10.931634] loop: module loaded 11.074100] usb 2-1: New USB device found, idVendor=05ac, idProduct=1003 11.074106] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 11.074110] usb 2-1: Product: Hub in Apple Extended USB Keyboard 11.074114] usb 2-1: Manufacturer: Mitsumi Electric 11.074249] usb 2-1: configuration #1 chosen from 1 choice 11.077124] hub 2-1:1.0: USB hub found 11.079171] hub 2-1:1.0: 3 ports detected 11.324044] usb 5-1: new full speed USB device using uhci_hcd and address 2 11.335713] fuse init (API version 7.11) 11.502395] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000 11.502401] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 11.502527] usb 5-1: configuration #1 chosen from 1 choice 11.743708] usbcore: registered new interface driver hiddev 11.743736] usbhid 5-1:1.0: couldn't find an input interrupt endpoint 11.744538] usbcore: registered new interface driver usbhid 11.744542] usbhid: v2.6:USB HID core driver 11.744700] usb 5-2: new full speed USB device using uhci_hcd and address 3 11.929400] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240 11.929406] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 11.929411] usb 5-2: Product: IR Receiver 11.929414] usb 5-2: Manufacturer: Apple Computer, Inc. 11.929541] usb 5-2: configuration #1 chosen from 1 choice 11.939693] generic-usb 0003:05AC:8240.0001: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0 11.943783] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only. 12.017131] usb 2-1.2: new low speed USB device using uhci_hcd and address 3 12.156132] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c045 12.156138] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 12.156142] usb 2-1.2: Product: USB-PS/2 Optical Mouse 12.156145] usb 2-1.2: Manufacturer: Logitech 12.156274] usb 2-1.2: configuration #1 chosen from 1 choice 12.173587] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6 12.196121] generic-usb 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0 12.273140] usb 2-1.3: new full speed USB device using uhci_hcd and address 4 12.434131] usb 2-1.3: New USB device found, idVendor=05ac, idProduct=020c 12.434138] usb 2-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 12.434143] usb 2-1.3: Product: Apple Extended USB Keyboard 12.434146] usb 2-1.3: Manufacturer: Mitsumi Electric 12.434288] usb 2-1.3: configuration #1 chosen from 1 choice 12.442645] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7 12.464170] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3/input0 12.471252] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input8 12.489047] generic-usb 0003:05AC:020C.0004: input,hidraw3: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.0-1.3/input1 15.240995] usb-storage: device scan complete 15.241514] scsi 2:0:0:0: Direct-Access     Generic  USB Disk         9.02 PQ: 0 ANSI: 2 15.243110] sd 2:0:0:0: [sdb] 398297088 512-byte hardware sectors: (203 GB/189 GiB) 15.243981] sd 2:0:0:0: [sdb] Write Protect is off 15.243986] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 15.243990] sd 2:0:0:0: [sdb] Assuming drive cache: write through 15.245484] sd 2:0:0:0: [sdb] 398297088 512-byte hardware sectors: (203 GB/189 GiB) 15.246231] sd 2:0:0:0: [sdb] Write Protect is off 15.246236] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 15.246239] sd 2:0:0:0: [sdb] Assuming drive cache: write through 15.246981]  sdb: sdb1 15.268433] sd 2:0:0:0: [sdb] Attached SCSI disk 16.648003] Adding 2047992k swap on /file.swap.  Priority:-1 extents:637 across:29563500k 26.629328] NET: Registered protocol family 10 26.629742] lo: Disabled Privacy Extensions 27.828833] lp: driver loaded but no devices found 27.848781] ppdev: user-space parallel port driver 34.649019] Bluetooth: Core ver 2.14 34.650108] NET: Registered protocol family 31 34.650112] Bluetooth: HCI device and connection manager initialized 34.650117] Bluetooth: HCI socket layer initialized 34.733770] Bluetooth: L2CAP ver 2.11 34.733774] Bluetooth: L2CAP socket layer initialized 34.761219] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -75 34.837147] Bluetooth: RFCOMM socket layer initialized 34.837165] Bluetooth: RFCOMM TTY layer initialized 34.837168] Bluetooth: RFCOMM ver 1.10 35.074505] usb 5-1: USB disconnect, address 2 35.312073] usb 5-1: new full speed USB device using uhci_hcd and address 4 35.507267] usb 5-1: New USB device found, idVendor=05ac, idProduct=8206 35.507273] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 35.507410] usb 5-1: configuration #1 chosen from 1 choice 35.652918] Bluetooth: Generic Bluetooth USB driver ver 0.4 35.653070] usbcore: registered new interface driver btusb 39.739686] sky2 eth0: enabling interface 39.740281] ADDRCONF(NETDEV_UP): eth0: link is not ready 41.588448] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx 41.589029] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 638.188020] kjournald starting.  Commit interval 5 seconds 638.188656] EXT3 FS on sdb1, internal journal 638.188663] EXT3-fs: mounted filesystem with ordered data mode.

class="line867"> class="anchor" id="line-1891">

i386:

$ dd if=/dev/zero of=/tmp/test.dd bs=1024 count=200000 records in records out bytes (205 MB) copied, 5.66092 s, 36.2 MB/s

amd64:

$ dd if=/dev/zero of=/tmp/test.dd bs=1024 count=200000 enregistrements lus enregistrements écrits octets (205 MB) copiés, 1,46261 s, 140 MB/s

class="line874">i386:

$ sudo /sbin/hdparm -tT /dev/sda v/sda: Timing cached reads:   4644 MB in  2.00 seconds = 2325.85 MB/sec Timing buffered disk reads:  186 MB in  3.00 seconds =  61.99 MB/sec

amd64:

$ sudo /sbin/hdparm -tT /dev/sda ev/sda: Timing cached reads:   6338 MB in  2.00 seconds = 3176.58 MB/sec Timing buffered disk reads:  186 MB in  3.00 seconds =  61.96 MB/sec

space from others filesystems or OS class="anchor" id="line-1927">

I successfully re-partionned the drive of the iMac with gparted to get some Gigas for GNU/Linux

2> class="anchor" id="line-1931">

It is recommended to install with the ethernet interface (sky2 driver) if netinstall (wireless not natively supported by linux driver)

class="anchor" id="line-1935">

Wireless on this model (Broadcom 4328) is not yet supported by any Linux driver¹. NDISwrapper does the job quite well.

class="line867">

$ sudo aptitude install module-assistant sudo m-a prepare sudo m-a auto-install ndiswrapper

loading (non-dfsg/non-free) class="anchor" id="line-1947">

$ wget http://ftp.us.dell.com/network/R151517.EXE mkdir driver unzip -a R151517.EXE -d driver/ cd driver/DRIVER/ sudo ndiswrapper -i bcmwl5.inf sudo ndiswrapper -l sudo ndiswrapper -m sudo modprobe ndiswrapper echo ndiswrapper >> /etc/modules echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf # don't load generic driver !

class="line867">

echo << EOF /bin/sh BEGIN INIT INFO Provides: ndiswrapper Required-Start: Required-Stop: Default-Start: S Default-Stop: Short-Description: enable to load ndiswrapper Description: enable to load ndiswrapper END INIT INFO ohci_hcd ssb ndiswrapper ndiswrapper ssb ohci_hcd end file ############ F sudo chmod 755 /etc/init.d/ndiswrapper sudo ln -s /etc/init.d/ndiswrapper /etc/rc2.d/S99ndiswrapper

graphical installation class="line867">

$ sudo aptitude install ndisgtk

Some help here: http://doc.ubuntu-fr.org/bcm4328

More information on NDISwrapper is available on this wiki.

(integrated Webcam) class="line867">

$ sudo aptitude install isight-firmware-tools

tem_.28required_and_non-free.29">Firmware location on Mac OS X filesystem (required and non-free) class="line867">

/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBVideoSupport.kext/Contents/MacOS/AppleUSBVideoSupport

loading class="line867">

$ sudo modprobe uvcvideo sudo echo "uvcvideo" >> /etc/modules

You can test the integrated webcam with cheese for example.

class="line874">Automatically discovered, nothing to do

/h3> class="line862">Nothing to do, Xorg (1.4.2 release now), recognize and adapt resolution.

class="anchor" id="line-2021">

Nothing to do specific; multimedia shorcuts (Sound level, mute, eject) are functionnal with Gnome (2.22.3 now)

class="anchor" id="line-2025">

2 choices:

radeonhd (for my specific model, Radeon X1600/R500, 3D support)
fglrx (non-free driver, 3D support)

class="line874">Installed by default Desktop install and provide 3D/2D acceleration support

$ sudo aptitude install xserver-xorg-video-radeonhd glxgears # from mesa-utils frames in 5.0 seconds = 2759.461 FPS frames in 5.0 seconds = 2793.599 FPS frames in 5.0 seconds = 2785.283 FPS

class="line867">

$ sudo m-a auto-install fglrx sudo aticonfig --initial # generate xorg.conf with fglrx section

Verify:

$ fglrxinfo screen: 0 vendor string: ATI Technologies Inc. renderer string: ATI Mobility Radeon X1600 version string: 2.1.7769 Release

Infrared Remote class="anchor" id="line-2056">

As you have seen before, the IR Receiver is connected via USB bus:

$ lsusb |grep -i ir 004 Device 003: ID 05ac:8240 Apple, Inc. IR Receiver [build-in]

This don't require any other kernel support and you just have to install lirc:

$ sudo apt-get install lirc

Edit /etc/lirc/hardware.conf:

# /etc/lirc/hardware.conf Arguments which will be used when launching lircd RCD_ARGS="" start lircmd even if there seems to be a good config file ART_LIRCMD=false start irexec, even if a good config file seems to exist. TART_IREXEC=false to load appropriate kernel modules AD_MODULES=true Run "lircd --driver=help" for a list of supported drivers. IVER="macmini" If DEVICE is set to /dev/lirc and udev is in use /dev/lirc0 will be automatically used instead VICE="/dev/usb/hiddev0" DULES="" Default configuration files for your hardware if any RCD_CONF="" RCMD_CONF=""

Generate /etc/lirc/lircd.conf:

$ sudo irrecord -H macmini -d /dev/usb/hiddev0 /etc/lirc/lircd.conf # generate /etc/lirc/lircd.conf.conf

that give you:

begin remote name  Apple_remote_iMac5,1 8 30 100 0     0 0     0 pre_data_bits   24 0x87EE27 211986 toggle_bit_mask 0x0 begin codes VOLUP                    0x0B VOLDOWN                  0x0D BACKWARD                 0x08 FORWARD                  0x07 PLAY                     0x04 MENU                     0x02 end codes remote

Because if not you don't have volume up button enabled (not investigated).

Restart lirc:

$ sudo /etc/init.d/lirc restart

Launch irw to verify:

$ irw

and push buttons, you may see:

0000000087ee270b 00 VOLUP Apple_remote_iMac5,1 00000087ee270d 00 VOLDOWN Apple_remote_iMac5,1 00000087ee2708 00 BACKWARD Apple_remote_iMac5,1 00000087ee2707 00 FORWARD Apple_remote_iMac5,1 00000087ee2704 00 PLAY Apple_remote_iMac5,1 00000087ee2702 00 MENU Apple_remote_iMac5,1

After pressing button Pause, Volume up, Next, Volume down, Precedent, Menu.

You can now have a ~/.lircrc to use this buttons !

Thanks http://idebian.wordpress.com/2008/07/15/infrared-in-linux-lirc/

(applesmc module) class="anchor" id="line-2158">

class="line862">2.6.26 (current Debian lenny/testing kernel) don't have support for iMac5,1².

>= 2.6.27 kernel has support

Compile as kernel module
Load module (modprobe applesmc)

class="anchor" id="line-2167">

To manage fan speed:

# echo "1" > /sys/devices/platform/applesmc.768/fanX_manual echo "1200" > /sys/devices/platform/applesmc.768/fanX_output

Where X could be 1 (ODD fan), 2 (HDD fan) or 3 (CPU fan).

: Gnome sensors applet can be used for showing temperature and fan speed. You can alternatively use the sensors command to verify the speed.

and fan descriptions class="anchor" id="line-2180">

Here is a complete list of the 12 temp sensors (mactel-linux-devel archive³):

# cat > /etc/sensors.d/applesmc-isa-0300.conf << EOF "temp1" "Ambient" "temp2" "Enclosure Bottom" "temp3" "CPU A" "temp4" "unknown TC0P" "temp5" "GPU Heatsink" "temp6" "GPU" "temp7" "unknown TG0T" "temp8" "Heatsink A" "temp9" "Heatsink B" "temp10" "Memory Controller" "temp11" "unknown Ts0P" "temp12" "unknown Ts1P" class="anchor" id="line-2198">Sensors command now show us the right label: 
$ sensors plesmc-isa-0300 ISA adapter 2996 RPM  (min =  800 RPM) 2998 RPM  (min = 1400 RPM) 2995 RPM  (min =  800 RPM) +27.5°C Bottom: +38.0°C +38.0°C +41.5°C +42.0°C +38.0°C +45.0°C retemp-isa-0000 ISA adapter +31.0°C  (high = +100.0°C, crit = +100.0°C) retemp-isa-0001 ISA adapter +35.0°C  (high = +100.0°C, crit = +100.0°C)  
 : you have to load the coretemp kernel module to have cpu temperature. 
 3> class="anchor" id="line-2228">
The iMac Intel presented here seems to consume 220 Watts (french measure). 
The s2ram -f works (uswsusp) 
All others mode not tested yet. 
 class="anchor" id="line-2235">
grub2 boot loader works very good in the Linux partition: 
sudo aptitude install grub-pc vi /etc/default/grub  # edit your partitions !!! grub-install /dev/<your_linux_partition> vi /boot/grub/device.map  # if necessary update-grub2
 : Please note that grub2 partition number now start at 1 and not 0 
 class="anchor" id="line-2248">
Microphone (no clues) 
Brightness (no clues) 
bless --device /dev/disk0s2 --setBoot --legacy --verbose # where /dev/disk0s2 is the partition you installed grub (Mac OS X command) 
 class="line891">iMacG5 - Previous model and some tips 
 class="anchor" id="line-2257">
http://hardware4linux.info/computers/sysinfo/3618/ - Complete hardware listing (my model) 
http://www.mactel-linux.org/wiki/Main_Page - (seems to be old) 
http://support.apple.com/kb/HT1463?locale=fr_FR - How to identify hardware version  
https://help.ubuntu.com/community/MacBook - many stuff to apply here 
https://help.ubuntu.com/community/MacBookPro 
 CategoryMacintoshComputer 
http://wireless.kernel.org/en/users/Drivers/b43#unsupported  (1)
http://lkml.org/lkml/2008/10/22/348  (2)
http://www.mail-archive.com/mactel-linux-devel@lists.sourceforge.net/msg00516.html  (3)

-  ⇤ ← Revision 47 as of 2010-01-23 16:51:31 → 
  Size: 112657
  Editor: GuillaumeDelacour
  Comment: Information about grub partition number outside code block
+   ← Revision 48 as of 2010-04-06 06:02:11 → ⇥
  Size: 112666
  Editor: ?NilsBarth
  Comment: better cat
-Deletions are marked like this.
+Additions are marked like this.
 Line 2263:
-CategoryHardware
+CategoryMacintoshComputer

Why this page?

lsusb

/proc/cpuinfo

dmidecode

dmesg

Some bench

hdparm

Get After installingWireless

Driver $ $ $ $ $ $ $ $ $

Init script

Alternative: iSight uvc module $

Sound

Fglrx

Apple Bus # # LI #Don't #ST #Don't #S #Try LO # DR # # DE MO # LI LI bits eps aeps one zero pre_data gap end 00 00 00 00 00

Sensors Loading modules

Temperature label label label label label label label label label label label label EOFap Adapter: ODD : HDD : CPU : Ambient: Enclosure CPU A: unknown TC0P: GPU Heatsink: GPU: unknown TG0T: co Adapter: Core 0: co Adapter: Core 1:

Software suspendBoot loader

TODO

Alternative:
iSight
uvc module
$