ADSL Free dégroupé

Ma situation : je suis en sid, avec java 1.5.0 beta de chez Sun. Connecté en Free non dégroupé, via le sagem 908.

Attention, ce n'est QUE mon expérience personnelle, pas quelque chose garanti pour fonctionner à tous les coups.

la connexion

Aucun problème, un pppoeconfig m'a donné le /etc/ppp/peers/dsl-provider suivant :

 # Configuration file for PPP, using PPP over Ethernet 
 # to connect to a DSL provider.
 #
 # See the manual page pppd(8) for information on all the options.

 ##
 # Section 1
 #
 # Stuff to configure...

 # MUST CHANGE: Uncomment the following line, replacing the   user@provider.net
 # by the DSL user name given to your by your DSL provider.
 # (There should be a matching entry in /etc/ppp/pap-secrets with  the password.)
 #user myusername@myprovider.net

 # Use the pppoe program to send the ppp packets over the Ethernet link
 # This line should work fine if this computer is the only one accessing
 # the Internet through this DSL connection. This is the right line to use
 # for most people.
 pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"

 # An even more conservative version of the previous line, if things
 # don't work using -m 1452... 
 #pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1412"

 # If the computer connected to the Internet using pppoe is not being used
 # by other computers as a gateway to the Internet, you can try the following
 # line instead, for a small gain in speed:
 #pty "/usr/sbin/pppoe -I eth0 -T 80" 

 # The following two options should work fine for most DSL users.

 # Assumes that your IP address is allocated dynamically
 # by your DSL provider...
 noipdefault
 # Try to get the name server addresses from the ISP.

 # Use this connection as the default route.
 # Comment out if you already have the correct default route  installed.
 defaultroute

 ##
 # Section 2
 #
 # Uncomment if your DSL provider charges by minute connected
 # and you want to use demand-dialing. 
 #
 #  Disconnect after 300 seconds (5 minutes) of idle time.

 #demand
 #idle 300

 ##
 # Section 3
 #
 # You shouldn't need to change these options...

 hide-password
 lcp-echo-interval 60
 lcp-echo-failure 3
 # Override any connect script that may have been set in  /etc/ppp/options.
 connect /bin/true
 noauth
 persist
 mtu 1492

 # RFC 2516, paragraph 7 mandates that the following options MUST NOT be
 # requested and MUST be rejected if requested by the peer:
 # Address-and-Control-Field-Compression (ACFC)
 noaccomp
 # Asynchronous-Control-Character-Map (ACCM)
 default-asyncmap

 user "xxxxxxxxxx@freeadsl"
 usepeerdns

avec le pap-secrets et le chap-secrets qui vont bien.

J'ai eu plus de problème avec l'application de monitoring du modem (BridgeMon) livrée sur le CD de Free.

J'ai fini par réussir à l'installer : une fois lancé le .bin, j'ai stoppé le processus juste après le lancement du jre.

J'ai alors recopié le fichier installer.zip trouvé dans

Ensuite un java -jar installer.zip m'a permis de lancer l'installeur avec un java complet qui a permis l'installation.

Il a quand même fallu créer à la main le lien symbolique dans /usr/local/bin, mais j'ai maintenant une application Bridgemeon.

Cependant elle semble ne trouver le modem que lorsque ppp est connecté.


Under Sid, you can use module-assistant for the sagem 800 :

 apt-get install module-assistant eagle-adsl-data  eagle-adsl-modules-src eagle-adsl-tools

after this, launch module-assistant :

now you have installed the debian packages for eagle-adsl, you can launch manually your connection with the standard tools like pon, ...