Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP/TFTP for network booting of diskless machines (source: from the package description).
Basic DNS Setup
First things first, let's install the package:
apt-get update apt-get install dnsmasq
If your goal was to set up a simple DNS server, you just succeeded. To test it, use your favorite DNS lookup tool pointed at localhost:
dig debian.org @localhost
nslookup debian.org localhost
By default, DNS is configured to forward all requests to your system's default DNS settings. In case you didn't know, these are stored in the /etc/resolv.conf file. See Debian Reference or the resolv.conf(5) man page for more details.
Now, if you want to add some names for your DNS server to resolve for your clients, simply add them to your /etc/hosts file.
Choosing Your Interfaces
One you will probably want to do is tell dnsmasq which ethernet interface it can and cannot listen on, as we really don't want it listening on the internet. Around line 69 of the /etc/dnsmasq.conf file, you will see:
Uncomment the line and specify which ethernet interface(s) you want it server IPs to. For example, if I want it to listen on eth1 (my DMZ) and eth2 (my local network), then it should look like:
If I didn't edit this line, it would also listen on eth0, my internet connection. I personally wouldn't recommend this, as it gives those evil guys a few doors to try to break into.
Basic DHCP Setup
By default, DHCP is turned off. This is a good thing, as you could bring down whatever network you are connected to if you are not careful.
To enable it, there is at least one line will need to edit in the /etc/dnsmasq.conf file. Around line 143, you will see:
To enable the DHCP server, you will need to give it a range of IP addresses to hand out. In the example above, this server would hand out 101 address starting at 192.168.0.50 and ending at 192.168.0.150. The last number is how long the DHCP leases are good for. In this example, they would be good for twelve hours.
Since I have two different networks that need DHCP, I'm going to change that line to:
Notice the "eth1" and "eth2" labels in the lines above? They aren't necessary, but definitely help once you start playing with more advanced configurations. It also helps me remember which range is which. Now restart your dnsmasq server, connect up a few clients, and see if they autoconfigure themselves:
Using dnsmasq to cache DNS queries for the local machine is a bit tricky (unless you're using NetworkManager, see below), since all DNS queries from the local machine need to go to dnsmasq, while at the same time, dnsmasq must be configured to forward all those queries to upstream DNS servers.
Do not use this configuration if you use different network (e.g If you use a laptop!)
The dnsmasq(8) man page suggests the following:
- In order to configure dnsmasq to act as cache for the host on which it is running, put "nameserver 127.0.0.1" in /etc/resolv.conf to force local processes to send queries to dnsmasq. Then either specify the upstream servers directly to dnsmasq using --server options or put their addresses real in another file, say /etc/resolv.dnsmasq and run dnsmasq with the -r /etc/resolv.dnsmasq option. This second technique allows for dynamic update of the server addresses by PPP or DHCP.
There is, however, a simpler method; simply ensure that the machine's list of nameservers contains the line
as the first line, followed by the upstream nameservers. dnsmasq is smart enough to ignore this line and forward all queries appropriately, while all other applications will send all their queries to dnsmasq.
Exactly how to do this depends on the method(s) of network configuration in use. If you're manually hardcoding the nameservers (either in /etc/resolv.conf or elsewhere, such as a stanza in /etc/network/interfaces or in the Wicd GUI), then just add a reference to 127.0.0.1 as the first entry in the list. If you're using DHCP, then instruct your client to prepend 127.0.0.1 to the DHCP servers it receives. E.g., with dhclient, include the line
prepend domain-name-servers 127.0.0.1;
in the dhclient configuration file (/etc/dhcp3/dhclient.conf). [On my Sid system, the default configuration file shipped with the package contains that line, but commented out.]
Note that if you plan to use dnsmasq for the local system only, you should lock it down by adding the line
to the dnsmasq configuration file (/etc/dnsmasq.conf).
Local Caching using NetworkManager
Set this in /etc/NetworkManager/NetworkManager.conf:
and restart network-manager service.
dnsmasq with dnscrypt-proxy
dnsmasq combined with dnscrypt-proxy provide caching, encryption and server-side authentication. Useful to protect a laptop from potentially hostile networks.
apt-get install dnsmasq dnscrypt-proxy ## Configure /etc/resolv.conf to use dnsmasq nameserver 127.0.0.1 ## Configure /etc/dnsmasq.conf # ignore resolv.conf no-resolv # Listen only on localhost listen-address=127.0.0.1 # dnscrypt is on port 40 server=127.0.0.1#40 ## Configure /etc/systemd/system/sockets.target.wants/dnscrypt-proxy.socket with the following 5 lines if you are using systemd [Socket] ListenStream= ListenDatagram= ListenStream=127.0.0.1:40 ListenDatagram=127.0.0.1:40 ## restart both daemons
http://www.debian.org/doc/manuals/debian-reference/ch05 - Debian Reference: Chapter 5. Network setup
http://www.thekelleys.org.uk/dnsmasq/doc.html - dnsmasq home page