Translation(s): none


Atmel at76c506 devices

This page describes how to enable support for WiFi devices based on the Atmel at76c506 PCI chipset on Debian systems.

atmel_pci is a module for the Atmel at76c506 PCI 802.11b wireless LAN chipset. For assistance with Atmel PCMCIA or USB wireless devices, see the atmel_cs and at76_usb pages respectively.

Non-free firmware is required, which can be provided by installing the atmel-firmware package.

Installation

The atmel_pci driver is included in the mainline Linux kernel since version 2.6.5. It is included as a module in Debian kernel images.

Firmware is required to be installed prior to device operation:

  1. Add a "non-free" component to /etc/apt/sources.list for your Debian version, for example:

    # Debian Lenny/5.0
    deb http://ftp.us.debian.org/debian lenny main contrib non-free
  2. Update the list of available packages and install the atmel-firmware and wireless-tools packages:

    aptitude update
    aptitude install atmel-firmware wireless-tools
  3. The necessary kernel module should be automatically loaded. If necessary, it can be manually loaded via:

    modprobe atmel_pci
  4. Verify your device has an available interface:

    iwconfig
  5. Raise the interface to activate the radio, for example:

    ifconfig eth1 up
  6. Configure your wireless interface as appropriate.

Troubleshooting

Known Issues

Supported Devices

The page HowToIdentifyADevice/PCI explains how to identify a PCI device.

The following list is based on the alias fields of modinfo atmel_pci in Debian 2.6.26 (2.6.26-25lenny1) kernel images.

Other Notes

The dependent atmel module accepts a firmware parameter, which can be used to force the loading of a specific firmware file if necessary.

See Also


CategoryHardware