Translation(s): English - Français


Atheros AR9271, AR7010 devices (ath9k_htc)

This page describes how to enable support for WiFi devices based on Atheros AR9271 and AR7010 chipsets on Debian systems.

ath9k_htc is a driver supporting Atheros 802.11n USB chipsets, included in the mainline Linux kernel since version 2.6.35. Supported devices are listed at the end of this page.

AR7010-based devices (e.g. Netgear WNDA3200, TP-Link TL-WN821N v3) operate in USB mass storage mode by default. Since Linux 2.6.39, the driver will send the necessary command to enable wireless LAN operation.1

Non-free firmware is required, which can be provided by installing the firmware-atheros package.

{i} Atheros AR9170-based 802.11 draft-n devices are supported by ar9170usb.

Installation

Wheezy

  1. Add a "non-free" component to /etc/apt/sources.list, for example:

    # Debian Wheezy (testing)
    deb http://ftp.us.debian.org/debian wheezy main contrib non-free
  2. Update the list of available packages and install the firmware-atheros package:

    aptitude update && aptitude install firmware-atheros
  3. Connect the device to your system. The ath9k_htc kernel module is automatically loaded for supported devices.

  4. Configure your wireless interface as appropriate.

Supported Devices

The page HowToIdentifyADevice/USB explains how to identify a USB device.

The following list is based on the alias fields of modinfo ath9k_htc in Debian 3.2.0 (3.2.32-1) kernel images.

See Also


CategoryHardware | CategoryWireless