Differences between revisions 5 and 6
Revision 5 as of 2010-10-06 20:47:09
Size: 2233
Editor: GeoffSimmons
Comment: Remove Etch procedures, reference Squeeze.
Revision 6 as of 2010-10-06 20:58:10
Size: 2236
Editor: GeoffSimmons
Comment: Update InterWiki.
Deletions are marked like this. Additions are marked like this.
Line 18: Line 18:
 1. Install the DebPkg:wireless-tools package: {{{  1. Install the DebianPkg:wireless-tools package: {{{

Translation(s): none


ADMtek ADM8211 devices

This page describes how to enable support for WiFi devices based on the ADM8211 chipset on Debian systems.

adm8211 is a module for the ADMtek (now Infineon Technologies) ADM8211 802.11b wireless LAN chipset. Supported devices are listed at the end of this page.

Installation

The adm8211 driver is included in the mainline Linux kernel since version 2.6.24. It is included as a module in Debian kernel images.

Lenny, Squeeze

  1. Install the wireless-tools package:

    aptitude update && aptitude install wireless-tools
  2. If not already performed, connect the device to your system.
  3. The necessary kernel module should be automatically loaded. If necessary, it can be manually loaded via:

    modprobe adm8211
  4. Verify your device has an available interface:

    iwconfig
  5. Raise the interface to activate the radio, for example:

    ifconfig wlan0 up
  6. Configure your wireless interface as appropriate.

Supported Devices

The page HowToIdentifyADevice/PCI explains how to identify a PCI device.

The following list is based on the alias fields of modinfo adm8211 in Debian 2.6.26 (2.6.26-25lenny1) kernel images.

  • PCI: 10B7:6000 3Com Corporation 3CRSHPW796 [OfficeConnect Wireless CardBus]
    PCI: 1200:8201 CSS Corporation (Device name unknown)
    PCI: 1317:8201 ADMtek ADM8211 802.11b Wireless Interface
    PCI: 1317:8211 ADMtek ADM8211 802.11b Wireless Interface

See Also


CategoryHardware | CategoryWireless