Differences between revisions 182 and 183
Revision 182 as of 2017-04-18 19:14:31
Size: 39954
Comment: note about shortcuts changing in RC4
Revision 183 as of 2017-06-17 19:52:49
Size: 39802
Comment: polish for Stretch advanced d-i options with accessibility
Deletions are marked like this. Additions are marked like this.
Line 52: Line 52:
In the Debian 9 Stretch RC3 installer, expert installation, rescue
mode, and automatic installation are also available with speech
synthesis. One has to first enter the "advanced" submenu
from the boot menu by typing 'a'. When using a BIOS
system (the boot menu will have beeped only once), this has to be followed by
Enter. From there, various shortcuts can be used: 'x'
for expert installation, 'r' for rescue mode, or
'a' for automated installation. When using a BIOS system,
they must be followed by Enter.

Starting from the Debian 9 Stretch RC4 installer, to get speech
synthesis enabled, 's' has to be pressed (and followed by Enter on BIOS
systems) between pressing 'a' and 'x'/'r'/'a'. Not pressing 's' only allows to get Braille support.
In the Debian 9 Stretch, expert installation, rescue mode, and
automatic installation are also available with accessibility support.
One has to first enter the "advanced" submenu from the boot menu by
typing 'a'. When using a BIOS system (the boot menu will have beeped
only once), this has to be followed by Enter. 's' then has to be
pressed (and followed by Enter on BIOS systems) if you want to enable
speech synthesis. Various shortcuts can then be used: 'x'
for expert installation, 'r' for rescue mode, or 'a' for automated
installation. When using a BIOS system, they must be followed by

Translation(s): English - Français - German - Italiano - Spanish

This page describes the accessibility stack of Debian and provides configuration hints for users. For general package maintainer information on accessibility in Debian, please look at the accessibility maintainer page. For development details, please look at accessibility-devel.

Please help us help you

Please see: http://lists.debian.org/debian-accessibility/2013/10/msg00026.html , it'd be good that users provide test scenarios, so that non-disabled developers can know how to test accessibility packages, and thus help the accessibility team.

Debian installer accessibility

The Debian installer has braille, speech, and contrast accessibility features which are documented in the installation manual for the stable release, the last upload of the installation manual for the testing release (may be old), as well as the current draft for next upload (also on svn://svn.debian.org/svn/d-i/trunk/manual/en/boot-installer/). More precisely, the Debian installer on Linux has all the braille, speech, and contrast support, on kFreeBSD it has only contrast support, and on the Hurd it has serial-only braille support and contrast support.

Braille USB devices are automatically detected, serial devices need configuration at boot.

Accessibility support is available on all images except the non-gtk mini.iso image. For instance, one can use the CD-1 image from http://cdimage.debian.org/debian-cd/current/amd64/iso-cd/ or the DVD-1 image from http://cdimage.debian.org/debian-cd/current/amd64/iso-dvd/

In addition to the existing hardware speech support in the installer of Squeeze (Debian 6), software speech is supported in Wheezy (Debian 7) and later: when you get at the boot menu (a beep should be emitted to indicate that), simply press 's' and enter. It can also be triggered from the win32-loader by choosing the expert installer, the graphical mode installation, and by appending speakup.synth=soft to the kernel commandline. Note however that the windows boot menu is not accessible, one has to press down and enter while it is showing up at boot (for 30s by default).

In the Debian 9 Stretch, expert installation, rescue mode, and automatic installation are also available with accessibility support. One has to first enter the "advanced" submenu from the boot menu by typing 'a'. When using a BIOS system (the boot menu will have beeped only once), this has to be followed by Enter. 's' then has to be pressed (and followed by Enter on BIOS systems) if you want to enable speech synthesis. Various shortcuts can then be used: 'x' for expert installation, 'r' for rescue mode, or 'a' for automated installation. When using a BIOS system, they must be followed by Enter.

When installation is done via braille or speech, the same braille and speech parameters will get enabled on the installed system. Orca will also be enabled for the user created at installation.

If speech synthesis does not come up, we need information to find out where the bug is.

First and foremost, we need the exact URL where you have downloaded the installer image, otherwise we won't ever manage to find a bug which could only exist on the image you have used (and which has to be fixed too!)

Inside the installer, press alt-f2 to switch to a shell console, press enter to start the shell, and type

amixer scontrols

amixer scontents

cat /proc/asound/cards

and post the output to debian-accessibility@lists.debian.org so we can know whether a sound card was detected and what the volume level names are. If only an error message shows up, or if you do not have resources to be able to read the shell console, please try to run a live CD, make sound work with it, and post the output of lsmod to debian-accessibility@lists.debian.org so we can know what sound driver is missing.

Images for squeeze with software speech can be downloaded from http://people.debian.org/~sthibault/espeakup/ but they don't seem to be working any more due to kernel update in the official archive. As a replacement, the Wheezy images can be used, and when given the archive mirror choice, type '<' to get back to main menu, change the priority to lowest, enter the mirror selection part again in the main menu, and then one can choose to install Squeeze instead of Wheezy, and change the priority to high again with the same method.

To record some boot option and thus avoid typing them blindly, one can remaster an image by using the script below:


Testing accessibility in the debian installer is documented on the Debian installer accessibility page.

LiveCD accessibility

The gnome liveCD images from https://www.debian.org/CD/live/ have screen reader support. At the boot menu, a beep should be emitted to indicate that one has to press enter. Then the desktop launches up (TODO: add beep), and one can press super-alt-s to start Orca.

Braille support

Braille device support is handled by brltty, which is started as a background daemon. Most displays work under brltty, connected via either a serial port, USB or bluetooth. Details on supported braille devices can be found on the brltty website (http://www.mielke.cc/brltty/). It also provides screen reading support for the Linux text console. Screen reading support for the gnome desktop is provided by Orca . It does not drive braille devices itself, it "connects" to brltty via BrlAPI to do so. If Orca does not manage to output braille, make sure that

  • /etc/brlapi.key exists and contains something (the actual content doesn't matter, as long as it is not empty).

  • you have read permission on /etc/brlapi.key

  • brltty is up and running.

Some braille devices have an integrated braille keyboard. Brltty supports simulating keypresses on the text console. For proper simulation on Xorg (handle non-qwerty layouts, in particular), the brltty-x11 package should be installed. It provides xbrlapi, which should be started at Xorg session startup, before starting orca.

The PC keyboard can also be used as a braille keyboard. In /etc/brltty.conf, uncomment key-table keypad, and restart brltty. One can then switch to braille by pressing insert+asterisk on the numpad, and switch back to normal by pressing insert+slash on the numpad. The default is to use the asdfjkl, keys as braille keys, but /etc/brltty/kbd-braille.kti can be modified to use other keys.

One can also type unicode braille patterns (not letters, pure braille, shown as such on the screen) thanks to the console-braille package, which includes keyboard layouts and the setbrlkeys program to load them easily.

Brltty also has very basic graphical screen reading support, which is limited to text fields, e.g. edit's main widget, or gnome-terminal's terminal. This is shipped in the brltty-x11 package, and can be started by running

brltty -b ba -x as

at Xorg session startup. -b ba tells it to connect via BrlAPI to the already-running brltty that drives the actuall braille device. -x as selects the At-Spi driver, which performs graphical screen reading.

Speech support

Debian provides a lot of software speech syntheses, a list can be found in the speechsynthesis blend task. Screen readers can often directly use some of the speech syntheses, or use generic interfaces, such as speech-dispatcher. speech-dispatcher runs as a daemon, which screen readers can connect to in order to emit speech. speech-dispatcher then has several modules to support various speech syntheses.

Speech syntheses, especially on the command line, are known to have issues with pulseaudio. It is recommended to disable/remove pulseaudio, like described #Disable_Pulseaudio.

text console

Software speech syntheses are supported on the text console. There are two screenreaders within Debian which can make use of them, speakup and brltty.


BRLTTY offers mature screen reading support for the console including speech. You have the choice of using espeak directly or speech-dispatcher. They can be installed with the brltty-espeak and brltty-speechd package, respectively.

It is necessary to activate the speech driver in the configuration of BRLTTY. Open /etc/brltty.conf and edit it:

1. When using brltty-espeak, uncomment or insert the following line:

speech-driver es

2. When using brltty-speechd, uncomment or insert the following line

speech-driver sd

Afterwards reload BRLTTY with sudo service brltty restart.


The simplest way is using the espeakup package which directly plugs the espeak software synthesis to the in-kernel screen reader.

Another way is by installing speech-dispatcher and speechd-up. Speech-dispatcher needs to be started in system-wide mode: /etc/default/speech-dispatcher needs to contain


Please see the section about speech-dispatcher for more details.

Hardware speech syntheses are also supported on the text console through the speakup drivers. This however requires to disable the 8250 serial port driver by setting this variable in /etc/default/grub:


one can then add for instance this in /etc/modules to get a speakup module loaded:



ToDo: needs to be written. Document:

  • aim of spd
  • installation
  • configuration: alsa, modules, ...
  • system vs. user service

Also, if you do not have pulseaudio installed, you need to made speech-dispatcher revert to alsa: in /etc/speech-dispatcher/speechd.conf, uncomment the line AudioOutputMethod and set it this way:

AudioOutputMethod "alsa"

Testing Speech-Dispatcher

You can test whether speech-dispatcher works by running

spd-say "some text"

Or if you want to test a specific module like espeak:

spd-say -o espeak "some text"

audio level

Starting from Stretch, the audio levels are reset to a default value at bootup. If you want to change that default value, set the audio levels to the desired value (e.g. with alsamixer from the alsa-utils package), and save the settings by running as root

alsactl store


Embossers can easily be used in text mode through the CUPS generic text driver:

In the printers panel (accessed through the printer icon in the control panel, or directly by browsing http://localhost:631/ and clicking on Administration), add a printer, choose the connexion (usb, parallel port, etc.), you can freely choose a description to your liking, and for the driver selection, choose the "Generic" maker, and choose the "Generic text-only printer" choice.

To print, you can then just run

lp test.txt

If your embosser doesn't do it automatically, you may need to reformat your text to the width of the paper by using the fmt command, for instance for 40 columns:

fmt -40 < test.txt > test2.txt
lp test2.txt

Accessible boot

GRUB can be made to beep when it is ready to take keyboard presses: in /etc/default/grub , uncomment or add the following line:

GRUB_INIT_TUNE="480 440 1"

and run update-grub

An option to get a completely accessible bootloader is to use petitboot. The principle is to make the normal bootloader (e.g. Grub) boot Linux normally, but making it start petitboot and brltty. Petitboot provides the list of kernels to boot, and permits to append parameters, and then uses kexec to boot the desired kernel with the desired options.

This however does not support booting Windows, only Linux.

First, install the petitboot package, create a /boot/petitboot.sh file containing for instance:

   1 #!/bin/sh
   2 /bin/mount none /var -t tmpfs
   3 /bin/mount none /tmp -t tmpfs
   4 /etc/init.d/udev start
   5 /usr/sbin/pb-discover &
   6 /sbin/brltty
   7 /usr/sbin/petitboot-nc -l /tmp/log

And make it executable:

chmod +x /boot/petitboot.sh

Then, create a boot entry for petitboot. For instance, copy/paste from /boot/grub/grub.cfg a Linux entry (which is known to boot fine) to the end of /etc/grub.d/40_custom , append at the end of the linux line (that specifies the vmlinux file) init=/boot/petitboot.sh , and name the menu entry petitboot. You can also choose a hotkey for the entry. So for instance it should look like:

menuentry 'petitboot' --hotkey=p --class debian --class gnu-linux --class gnu --class os {
    echo 'Loading Linux <version> ...'
    linux /boot/vmlinuz-<version> root=blabla ro init=/boot/petitboot.sh
    echo 'Loading initial ramdisk ...'
    initrd /boot/initrd.img-<version>

You may want to keep a backup of the known-to-boot kernel in a safe place, and use that path instead of the Debian-provided file whose upgrades might break.

Eventually, run update-grub to update /boot/grub/grub.cfg.

That way, at boot when you get the grub beep, you have the option to press the "End" key then "Enter", or press the hotkey "p", and that will boot linux, brltty, and petitboot.

If after good testing you really feel safe enough, you can make it the default in grub: in /etc/default/grub, set


and re-run update-grub . You still have the option, when grub beeps, to press "Begin" then "Enter" to boot without petitboot.

Console fonts

The Linux text console font can be tuned to get better accessibility: in /etc/default/console-setup, one can set FONTFACE to Terminus, in order to be able to select bigger fonts such as even FONTSIZE=32x16. That will of course reduce the amount of text displayed on the screen too. To fine-tune the exact amount of text displayed on the screen, SCREEN_WIDTH and SCREEN_HEIGHT can be set.

The console-braille package provides braille fonts, which you can use to type unicode braille patterns, and show braille on the physical screen. This is incompatible with using FONTFACE, as you will need to specify both the normal font and the braille font in the FONT variable, see example in /etc/default/console-setup .

Graphical User Interface

Currently, you can access the GNOME, MATE, XFCE, LXDE, LXQt desktops with Orca. Please see the article Orca and the GNOME accessibility guide for more details. For Gnome 3, it is useful to read the gnome shell shortcut guide

The simplest ways to install these graphical user environment is to install the corresponding tasks, for instance:

apt-get install task-gnome-desktop

Another, lighter, way is to install Xorg and the environment meta-package by hand, but you will probably miss quite a few things. For instance:

apt-get install xorg xserver-xorg-video-all xserver-xorg-input-all desktop-base menu gnome-core

And also make sure to have orca installed to access it:

apt-get install gnome-orca

Each desktop has a way to enable accessibility. You can also do it by hand, see among the tips&tricks below.

For KDE accessibility, the qt-at-spi package needs to be installed, and the QT_ACCESSIBILITY environment variable has to be set to 1:


Color Themes for accessibility

The GNOME magnifier supports inverting colors. However, some people prefer other colors for the graphical environment or prefer to have only high contrast without all colors inverted. For this there is a package called gnome-accessibility-themes, where different themes are included. You can install it with

aptitude install gnome-accessibility-themes

These can then be selected in the preferences menu of GNOME.

Colors can be inverted using xcalib too, i.e.:

xcalib -i -a

will just invert the whole desktop.

Color Blindness

For colorblindness, the KDE magnifier program includes options to alter the color of just a region (not the whole screen). It has settings for protanopia, deuteranopia, titranopia, and achromatopsia.

Full Screen magnification support

There are several options for full screen magnification. Pick the one that works best for you.

Option 1: Resolution

The simplest way is to lower the screen resolution: xrandr -s 800x600

To reset the screen resolution, use: xrandr -s 0

Option 2: Panning

It is possible to zoom in without changing the screen resolution. Only a portion of the screen will be visible, so move the mouse to the screen edges to pan around.

To enable panning: xrandr --output VGA1 --mode 640x480 --fb 1280x1024 --panning 1280x1024

To turn off panning: xrandr -s 0

Option 3: Desktop Environment

The previous solutions work for any Debian system. However, depending upon which desktop environment you have installed, you may also have a simple graphical way to enable zooming. For example, Gnome-Shell and Cinnamon both include a Universal Access icon universalaccess.svg on their dock with a menu option to enable full screen zoom & pan.

Option 4: Compiz

Enhanced magnification support was provided by Compiz, but it is no longer packaged in Debian. It was reported by Shaun Marolf in 2015 that Ubuntu's Compiz packages work in Debian without modification, but that has not been tested.

Deprecated: Changing DPI

An older method which may no longer work (and probably should be deleted from this wiki) was to tell the Xserver that it had a higher resolution display than it really had:

To change DPI: xrandr --dpi 200

which will make everything basically two times bigger (200 dpi instead of the standard 96dpi or even 75dpi). Some elements may not get resized, one can put the following in ~/.gtkrc-2.0:

gtk-font-name = "DejaVu Sans 20"
gtk-cursor-theme-size = 64
gtk-icon-sizes = "gtk-menu=48,48 : gtk-button=48,48 : gtk-dialog = 128,128"

style "default"
        GtkRange::slider_width = 56
        GtkRange::stepper_size = 56
        GtkPaned::handle-size = 20
        GtkCheckMenuItem::indicator-size = 48
        GtkCheckButton::indicator-size = 48
        GtkOptionMenu::indicator-size = 48
        GtkTreeView::indicator-size = 48
        GtkTreeView::expander-size = 40

class "GtkWidget" style "default"

Magnifying Glass

Some people prefer using a virtual magnifying glass instead of magnifying the entire screen. The screen resolution is not changed, instead a small window is added which shows a magnified version of a portion of the screen. Usually you can choose where to be magnify by dragging inside the window or by having the program always magnify the region around the mouse. There are again different possibilities, you are free to choose from the following:

Option 1: Kmag

The KDE screen magnifier can be installed with apt-get install kmag.

Kmag is simple to use. It will take up more disk space (>200MiB) if you don't already have KDE installed. Although designed for KDE, Kmag works with any desktop environment, including Gnome and Cinnamon.

Option 2: Virtual Magnifying Glass

If you have trouble reading only occasional words, you may prefer Virtual Magnifying Glass (VMG). Its advantage is that it is usually not visible, unlike programs such as kmag which create a window that always covers part of your screen. Clicking on the VMG icon in the tray shows a zoomed lens around your mouse pointer. Moving the mouse, moves the lens. Clicking anywhere closes the program. (Tip: To change the zoom level, roll the mouse-wheel.)

VMG is available from Stretch and later. It can be installed fine on Jessie systems too, the .deb can be obtained on https://packages.debian.org/sid/vmg , and installed with

dpkg -i vmg_3.7.1-1_amd64.deb
apt-get -f install

GNOME Magnifier

GNOME magnifier used to be the recommended magnifying glass tool for Debian. However, we will not cover it here as it is no longer packaged (as of Debian Jessie and Stretch).

gdm accessibility

The gdm graphical greeter supports accessibility, orca just needs to be enabled. But in Lenny the default installed gdm doesn't support this feature. So for Lenny you need, firstly, to remove gdm, and install gdm3 instead. Squeeze and later already use gdm3 by default.

Then, you can enable orca with either of four ways:

  • It is enabled automatically when accessibility features were enabled to access the Debian Installer
  • It can be enabled by clicking on the "accessibility" icon which brings a configuration panel.
  • Starting from Jessie, it can be enabled by typing the menu-alt-s shortcut.
  • It can be enabled by hand by running (for Squeeze):

su -s /bin/sh -c "gconftool-2 --type bool --set /desktop/gnome/applications/at/screen_reader_enabled true" Debian-gdm

or for Wheezy and later:

su -s /bin/sh -c 'eval $(dbus-launch) ; export DBUS_SESSION_BUS_ADDRESS DBUS_SESSION_BUS_PID ; GSETTINGS_BACKEND=dconf gsettings set org.gnome.desktop.a11y.applications screen-reader-enabled true' Debian-gdm || true 

lightdm accessibility

The lightdm graphical greeter supports accessibility, orca just needs to be enabled. Create the file /etc/xdg/lightdm/lightdm.conf.d/80_orca-dm-wrapper.conf and write the following in it:


Iceweasel/firefox accessibility

The version of iceweasel/firefox in Wheezy is not as accessible as later versions. It is recommended to download, install, and use a newer version of firefox on mozilla.com

The version in Jessie is much more accessible.

32bit applications accessibility

If you are running a 64bit system, and use some 32bit applications, having libatk-adaptor installed will not be enough for making 32bit applications accessible: you need to also install the 32bit version of the package. If you have not done it already, enable i386 package installation, as documented in great details on Multiarch/HOWTO:

dpkg --add-architecture i386

Then update the APT database:

apt-get update

and you can now install the 32bit version of the bridge:

apt-get install libatk-adaptor:i386

Java accessibility

To access Java applications, one needs to install the libatk-wrapper-java package. Unfortunately, in some versions, openjdk has disabled accessibility by default (See 705511), so one has to reenable it by hand. In the file /etc/java-6-openjdk/accessibility.properties for Debian 7 (Wheezy) or /etc/java-7-openjdk/accessibility.properties for Debian 8 (Jessie) the following line must be uncommented (the # in front needs to be removed):


Also, only the GTK look and feel has accessibility support, so in the file /etc/java-6-openjdk/swing.properties for Debian 7 (Wheezy) or /etc/java-7-openjdk/swing.properties for Debian 8 (Jessie) the following line must be uncommented (the # in front needs to be removed):



Virtualizations tools are more or less accessible


Xen uses a command-line interface, so is of course accessible. Setting up a Xen environment is however not so easy. See the Debian Xen wiki pages.


qemu/kvm can be run in text-mode, by using the -curses option. Of course, when the guest is in graphical mode, the text interface will not show anything useful, and a screen reader will still be needed inside the guest.

To let that screen reader emit speech, the -soundhw ac97 option can be used to provide the guest with a virtual sound board.

To let the screen reader emit braille, the -usbdevice braille option can be used to provide the guest with a virtual Baum braille device. The braille rendering will be done through the host brltty daemon.

Another way for braille is to pass-through a USB braille device. For instance, if on the host lsusb reports the braille device as:

Bus 001 Device 002: ID 0403:fe72 Baum

Giving the -usbdevice host:0403:fe72 option will give the USB device to the guest, i.e. you must first make sure that nothing like brltty in the host uses it, then run qemu/kvm, and then a brltty daemon inside the guest can access the physical device, as if it was connected to the virtual machine.

Of course, if one has two USB braille devices, one can be used by a brltty running on the host, and the other by a brltty running in the guest.


No Speech After Login In GNOME

If Orca only says "Welcome to Orca" and seems to be silent then, you are actually on an empty desktop. To get the focus, press Alt+F1 for the menu or Alt+F2 for the run-dialog.

BRLTTY/braille stops after boot

In Wheezy there has been added a program called modemmanager which scans serial (and possibly usb2serial) devices to detect it as a modem. Unfortunately this destroys the communication with braille displays connected via those ports. Just

apt-get remove modemmanager

to repair this issue.

Inaccessible GNOME 3 session / no fallback mode

It can happen that you end up in a inadequately accessible GNOME 3 session. For instance, if you press alt+f1 for the menu, nothing is spoken. This has to do with the not-yet well accessible GNOME shell. Please see below how to resolve this problem.

Debian Wheezy (GNOME 3.4)

In GNOME 3.4, there is a mode called fallback mode, which mimes the behavior of GNOME 2. You can enable it using:

gsettings set org.gnome.desktop.session session-name gnome-fallback

It must be done from the GNOME session. One can get a terminal by pressing Alt+F2, entering gnome-terminal<enter> and this will be accessible anyway.

Debian Jessie (GNOME >= 3.8)

In Debian Jessie with GNOME version >= 3.8, there is a mode called GNOME classic. This one uses the GNOME shell directly to achieve GNOME 2 alike user experience. When using startx, you can set up your .xinitrc as follows to use this mode:

if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  unset f

exec gnome-session --session=gnome-classic

speech-dispatcher issues

Some users use the ibmtts or viavoice speech-synthetiser with orca, and they think that it is not convenient. According to them, the speech synthetiser is slow, its reactivity is slow, and it often crashes. The problem is that no alternative seems to exist, as gnome-speech is no longer supported by ibmtts' vendors.

However, the package who connects ibmtts to gnome-speech is under the LGPL. So, it was packaged and its name in Debian is gnome-speech-ibmtts.

How can you install it? Firstly, install ibmtts or viavoice speech synthetiser. Then, run (as root user):

apt-get install gnome-speech-ibmtts

NOTE: if you install ibmtts after the Debian package, you have to do:  dpkg-reconfigure gnome-speech-ibmtts otherwise, the viavoice config file will not be generated and orca will not see viavoice at the starting of the preferences menu.

NOTE: you likely will need to do, before the first reboot of orca, a backup of your ~/.local/share/orca, then delete the contents of its contents. Do this with:

cp -Rp ~/.local/share/orca ~/.local/share/orcabackup
rm -r ~/.local/share/orca/*

You will need to recreate all your preferences (shortcuts, etc.).

This process allows users who do not want to use speech-dispatcher immediately to find a solution. Anyway, this solution is not ideal for the long-time future, as gnome-speech, or at-spi, will be deprecated with Gnome-3. It can however be a good transition. But it does not work for amd64 architectures. Only i386 is supported.

Note that you do not experience this issue if you migrate from lenny (5.0) to squeeze (6.0), as the migration maintains the necessary configuration so that ibmtts can be accessed via gnome-speech.

Xorg issues

Xorg may not want to start if no actual physical screen is attached to the video board. This should be reported to the video driver being used, you can cite http://lists.freedesktop.org/archives/xorg/2009-March/044206.html for the rationale behind fixing it.

In the meanwhile, one can use the dummy driver, which will not make use of any graphical card, and still let the gnome desktop start etc. Install the xserver-xorg-video-dummy package, and add the following lines to /etc/X11/xorg.conf (create one if you don't have any):

Section "Device"
    Identifier "noscreendevice"
    Driver     "dummy"

The support is however broken since Squeeze, see 696965, the following patch can be applied to fix it:

diff --git a/src/dummy_driver.c b/src/dummy_driver.c
index 6062c39..566a006 100644
--- a/src/dummy_driver.c
+++ b/src/dummy_driver.c
@@ -813,7 +813,7 @@ dummyDriverFunc(ScrnInfoPtr pScrn, xorgDriverFuncOp op, poin
     switch (op) {
            flag = (CARD32*)ptr;
-           (*flag) = HW_SKIP_CONSOLE;
+           (*flag) = 0;
            return TRUE;
            return FALSE;

Disable Pulseaudio

If Pulseaudio causes problems, there are multiple different ways to use the underlying ALSA sound system as a replacement.

For Desktop environments like Mate or even more lightweight alternatives, you can try to remove the package:

sudo apt-get remove pulseaudio

The two or three packages also marked for removal are not essential.

For other desktop environments like GNOME it is impossible to remove Pulseaudio. Disabling works as follows:

1. Execute the command

dpkg-divert --add --rename /usr/share/alsa/pulse-alsa.conf

2. Instruct pulseaudio not to spawn itself automatically. Edit /etc/pulse/client.conf and search for a line like:

; autospawn = yes

and change it into

autospawn = no

Hint for speech-dispatcher: Speech-Dispatcher refuses in some cases to switch to ALSA. In this case one can edit /etc/speech-dispatcher/speechd.conf and changes the line

# ?AudioOutputMethod "pulse"


AudioOutputMethod "libao"

and restarts speech-dispatcher via

killall speech-dispatcher; speech-dispatcher

Tips and tricks

Autostart Of Orca

Gnome 3

Orca can be enabled to start automatically in the Gnome 3 user session by hand by running

GSETTINGS_BACKEND=dconf gsettings set org.gnome.desktop.a11y.applications screen-reader-enabled true

Gnome 2

Orca can be enabled to start automatically in the Gnome 2 user session by hand by running

gconftool-2 --type bool --set /desktop/gnome/interface/accessibility true
gconftool-2 --type bool --set /desktop/gnome/applications/at/visual/startup true


Orca can be enabled to start automatically in the MATE user session by hand by running

GSETTINGS_BACKEND=dconf gsettings set org.gnome.desktop.a11y.applications screen-reader-enabled true
GSETTINGS_BACKEND=dconf gsettings set org.mate.interface accessibility true


The accessibility support for XFCE has to be enabled manually. This can be achieved either by clicking the "Enable assistive technologies" checkbox in the XFCE accessibility settings, or by running this command in an X session:

   xfconf-query -c xfce4-session -n -t bool -p /general/StartAssistiveTechnologies -s true

Alternatively you can put the following into $HOME/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml:

<?xml version="1.0" encoding="UTF-8"?>

<channel name="xfce4-session" version="1.0">
  <property name="general" type="empty">
    <property name="StartAssistiveTechnologies" type="bool" value="true"/>

The file might already exist. If you haven't configured XFCE yet, you can replace the content of this file by the above excerpt. Please note that this will drop your XFCE session configuration. If you don't want to lose your existing XFCE session parameters, just add another "general" property, it will look like this:

<channel name="xfce4-session" version="1.0">
  <property name="splash" type="empty">
  <property name="general" type="empty">
    <property name="FailsafeSessionName" type="empty"/>
    <property name="StartAssistiveTechnologies" type="bool" value="true"/>
  <property name="sessions" type="empty">
    <property name="Failsafe"

For now, orca will not autostart. The simple workaround is to just drop the "?OnlyShowIn" line in /etc/xdg/autostart/orca-autostart.desktop , or to add XFCE to it.


For now, orca does not start automatically. The simple workaround is to just drop the "?OnlyShowIn" line in /etc/xdg/autostart/orca-autostart.desktop. Alternatively, LXDE or LXQT can be added at the end of this line.

Accessibility in chroots

In order for applications to be accessible from within chroots, they need to have access to the at-spi bus. This bus lives in both /tmp and $HOME, so the following is needed, in addition to the usual at-spi configuration inside the chroot:

mount /tmp /where/the/chroot/is/tmp -o bind
mount /home /where/the/chroot/is/home -o bind

And as usual, the DISPLAY and XAUTHORITY environment variable should set to the value they have outside the chroot, in order to access the X display.

Screen off

To save battery, or to get some privacy, it can be interesting to shut the screen down. There are two approaches, where the first one is simpler, but requires administrator privileges.

Install the package vbetool and use the command

sudo vbetool dpms off

to shut down the monitor and

sudo vbetool dpms on

to reactivate it. It is also a good idea (but not required) to add a setting to your sudoers file to allow this command to be executed without password prompt. Add in /etc/sudoers:

user    ALL=(root) NOPASSWD: /usr/sbin/vbetool

.(where "user" must be replaced with the user name.)

Tip: After some time of inactivity, the monitor will be activated again after a key press. To avoid this you could create a script, called with ./<script_name> & to run it in the background and with the following content:

while [ 1 ]; do; sudo vbetool dpms off; sleep 20; done

The second approach differs for the console and X. On the text console, that can be done through

setterm -blank force

and restored through

setterm -blank poke

That needs to be run directly on the Linux console. When running through screen, you need to redirect the output e.g. to /dev/tty1:

setterm -blank force > /dev/tty1

On the graphical X11 console, that can be done using this script to toggle the display off and on:

   1 #!/bin/sh
   2 output=$(xrandr | grep ' connected ' | awk '{print $1}' | head -1)
   3 screenSize=$(xrandr | awk 'BEGIN {foundOutput=0}
   4     / '$output' / {foundOutput=1}
   5     /\*\+/ {print $1}
   6     /^[^ ]/ {if(foundOutput) exit 0}')
   7 if [ "$screenSize" != "" ]; then
   8     xrandr --output $output --fb $screenSize --off
   9     espeak -v es "Monitor apagado"
  10 else
  11     xrandr --output $output --auto
  12     espeak -v es "Monitor encendido"
  13 fi

Sound effects On The GNOME Desktop

If you would like to have sound effects to help you navigating on the GNOME desktop, run

sudo aptitude install freedesktop-sound-theme
gconftool-2 --type bool --set /desktop/gnome/sound/event_sounds true
GSETTINGS_BACKEND=dconf gsettings set org.gnome.desktop.sound event-sounds true

faster speaking eSpeak

The eSpeak speech synthesis can speak faster by adding a configuration option to the appropriate voices file. Those voices files can be found under /usr/lib/i386-linux-gnu/espeak-data/voices/. Pick there your language file (e. g. en-us or de). Open the appropriate file as administrator in a text editor and insert the following line:

speed 150

This will make eSpeak speak 50 % faster.

More Tips

More tips are available on http://brl.thefreecat.org/wiki/