Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2016-11-11 16:04:08 →
Size: 3139
Editor: AndySimpkins
Comment: Andys tasks etc
← Revision 4 as of 2016-11-11 16:12:05 → ⇥
Size: 3234
Editor: AndySimpkins
Comment: markup
Deletions are marked like this. Additions are marked like this.
Line 9: Line 9:
2x Mic Stands (Good for getting people to queue up to ask questions - use with handheld mics)
Line 46: Line 47:
 ** http://wiki.minnowboard.org/MinnowBoard_Turbot  * http://wiki.minnowboard.org/MinnowBoard_Turbot
Line 50: Line 51:
 1) Confirm that the Turbot is a suitable PC system
 2) Update to fanless PSU
 3) mount into 1U case with the following connection seup
 3.1) Connection to outside world		 1) Confirm that the Turbot is a suitable PC system
 
2) Update to fanless PSU

3) mount into 1U case with the following connection seup

3.1) Connection to outside world
Line 72: Line 76:
  3.2) Connections internally 3.2) Connections internally

Video Team Hardware

Work In Progress

Proposed shopping list / kit list per room

Audio

2x Headset Radio Mic 2x Handheld Radio Mic 2x Mic Stands (Good for getting people to queue up to ask questions - use with handheld mics) 4x 2m XLR cable (mic receiver to snake)

  • Radio Mics need to be licence free in all 3 ITU regions
  • We need to be able to change frequency to avoid interference with other users
  • Possible Open Hardware project?

2x Ambient Mic (pick up audience chatter / shout out questions) 2x Microphone stand (for ambient mics) 2x 20m XLR cable (to run from ambient mic to desk)

1x 5m 3.5mm stereo Jack to 2x 1/4" mono jacks (PC Audio to DI Box) 1x stereo DI box (2x 1/4" socket In to 2x XLR-M) active / phantom powered (PC audio) 2x 2m XLR cable (DI to snake)

1x 25m Mic 'snake' reel - 6 in 2 out

1x 8 channel mixing desk

  • Requires minimum 8 XLR input channels
  • Requires main and aux outputs (I am going to assume XLR for both of these - for this shopping list)
  • * main XLR goes to Main Camera
  • * Aux Send goes to house PA (preferably as a slide fader)

2x 5m XLR cable mixing desk to Main camera

2x 20m XLR cable mixing desk to PA (potentially via snake) 1x Balanced to unbalanced stereo balun transformer (XLR-F in to 1/4" Socket Out) 2x 2m 1/4" Mono Jack to Jack 1x 2m 1/4" Mono Jack to stereo 3.5mm jack 1x 2m 1/4" Mono Jack to RCA phono plug 1x 3.5mm Socket to 1/4" mono jack adapter

Opsis: Presentation capture

* Opsis FPGA Video to USB * 1U case * ?MinnowBoard Turbot (Micro PC)

* Small SSD

Tasks: 1) Confirm that the Turbot is a suitable PC system

2) Update to fanless PSU

3) mount into 1U case with the following connection seup

3.1) Connection to outside world

  • Common
    • IEC power
    • Power Switch
    • LED from nRST of OPSIS
  • Opsis
    • HDMI IN (from Presentation laptop)
    • HDMI Out (to Projector)
    • HDMI Out (to confidance screen)
    • Reset (+remote from minno board)

  • ?MinnowBoard

    • Ethernet (to Mixer PC)
    • USB sockets 1 (or 2 if available)
    • Reset

    • GPIO out from ?MinnowBoard to LED

3.2) Connections internally

  • Power switch to power supply

  • Powersupply to ?MinnowBoard (& SSD)

  • Powersupply to Opsis VIA GPIO Controlled Relay from ?MinnowBoard

  • HDMI Out from ?MinnowBoard to Opsis

  • JTAG from ?MinnowBoard to Opsis

  • GPIO out from ?MinnowBoard to relay to power sequance Opsis

  • GPIO out from ?MinnowBoard to relay to switch P18 / K2 (DPDT)

Video Mix PC

  • PC Able to host video mixing for 1 room
  • For single room events (i.e. a miniconf) this is the only PC needed on site
  • Vocto Mix video mixor software
  • 2x Black Magic SDI Capture Cards
  • 2x NIC (1GBit/s)
  • current generation i7
  • 16 GB RAM
  • 120GB SSD - System
  • 2 x 3TB HDD (Mirrored)
  • Silent (at least very quiate fans)
  • 4U Rack Case

---

Video Master PC

  • Video Master PC is responsible for ???