Differences between revisions 50 and 51
Revision 50 as of 2016-04-08 13:58:41
Size: 6346
Editor: BenHutchings
Comment: Stop referring to pm_test as new; update URL
Revision 51 as of 2016-04-08 13:59:20
Size: 6300
Editor: BenHutchings
Comment: Delete left-over heading for 'old approaches'
Deletions are marked like this. Additions are marked like this.
Line 84: Line 84:
The first two links refer to old approaches.

Help on software suspend

This page gathers bits of information about getting software suspend to work in Debian. Because the core system components change rapidly among Debian versions, software suspend works differently on different versions of Debians. This page is divided according to Debian versions from new to old.

Software suspend is still experimental. Depending on your system, a few more steps are needed to get suspend partially or fully working. However, many people find that it works quite well now.

For more reading material, see also the links at the bottom of this page about hibernate and suspend.

Debian Jessie (8)

One option is to use the Gnome "suspend-button" extension at https://extensions.gnome.org/extension/826/suspend-button/

Another option, under Gnome shell, is to simply press ALT before clicking the shutdown button in the user menu.

Disable suspend and hibernation

For systems which should never attempt any type of suspension, these targets can be disabled at the systemd level with the following:

sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target

To enable back hibernate and suspend use the following command:

sudo systemctl unmask sleep.target suspend.target hibernate.target hybrid-sleep.target

If you just want to prevent suspending when the lid is closed you can set the following options in /etc/systemd/logind.conf:


Then run systemctl restart systemd-logind.service or reboot.

More information is available in the manpage: man logind.conf

Debian Wheezy (7)

A very notable change is that HAL is phased out. If you still have the hal package installed, you should remove it or it will interference with pm-utils during suspend.

If the suspend / resume works well on your system, you are lucky and no need to read anything on this page. Or else, the first step to debug is to enable debugging for pm-utils, who control the suspend and resume process.

Enabling Debugging for pm-utils

The log of suspend and resume processes are in file /var/log/pm-suspend.log. It contains moderately verbose information by default. More information can be enabled for debugging by inserting line export PM_DEBUG=true into the beginning of file /usr/lib/pm-utils/pm-functions.

Fixing corrupted video on resume

A very common issue found after the computer resumes is corrupted video (or black screen, or no LCD backlight). The first step is to check whether the system is still running, which can be simply done by pressing the Capslock button and check whether the Capslock LED is changing accordingly. If the system is still running, in most cases we need to add a video quirk for your video card.

Debian now has kernel mode setting (KMS) enabled by default for most Intel, nVidia and ATI video cards. But pm-utils' video quirk does support KMS yet. So in most cases you should try disabling KMS first. The detail steps for your specific video card can be found on the KernelModesetting page.

After disabled KMS, if the video after resume still corrupts, you can try to suspend the system by using some video quirks. Read the manpage of the pm-suspend program for a very detail explanation of all the quirks available, and try the combinations of them from commandline. If you successfully find one combination of quirks that works for your system, you can add them into /usr/lib/pm-utils/video-quirks to make them permanent. At the same time, please help to file a bug against the pm-utils package with a patch about your changes so it can benefit the mass.

A common issue found on systems upgrading from old versions of Debian is the enabling of quirk-s3-bios freezes the system during suspend. If your system freezes during suspend, check the pm-suspend.log carefully after enabled debugging and make sure quirk-s3-bios is not used.

Kernel testing facility

The kernel has a Suspend testing facility changelog.

Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code. Namely, writing one of the strings below to this file causes the suspend code to work in one of the test modes defined as follows:

test the freezing of processes
test the freezing of processes and suspending of devices
test the freezing of processes, suspending of devices and platform global control methods(*)
test the freezing of processes, suspending of devices, platform global control methods and the disabling of nonboot CPUs
test the freezing of processes, suspending of devices, platform global control methods, the disabling of nonboot CPUs and suspending of platform/system devices

(*) These are ACPI global control methods on ACPI systems

Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level. Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off.

When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets.

The actual message (for googlers) are suspend debug: Waiting for 5 seconds.