1743
Comment: group all samba pages under Samba/
|
← Revision 19 as of 2021-01-09 16:31:02 ⇥
1855
add categories/todo
|
Deletions are marked like this. | Additions are marked like this. |
Line 60: | Line 60: |
[[BuildingALinuxDomain]] | ---- CategoryNetwork | CategorySystemAdministration | CategorySoftware | ToDo: review/refactor/group/merge with other [[Samba]] pages |
Back to Home Page Samba/BuildingALinuxDomain
SUMMARY
This is a guide on how to connect freeradius to an ldap server.
Step 1: Install freeradius
This is how you install freeradius. If you don't do this command, you won't have freeradius
apt-get install freeradius
Step 2: Modify the following freeradius configuration files:
- /etc/freeradius/clients.conf
- /etc/freeradius/users
- /etc/freeradius/radiusd.conf
/etc/freeradius/clients.conf
This file is where you specify what Radius clients can send Radius authentication requests to the Radius server. You can specify a subnet (/24,/22,etc) or a host (/32). The secret must be the same on client and server.
client x.x.x.x/x secret = secret
/etc/freeradius/users
This is where you tell the Radius server to use LDAP for specific user accounts. "user" can be replaced with the username. There must be one entry for each user.
user Auth-Type := LDAP
/etc/freeradius/radiusd.conf
This file is for specific Radius server settings. This section is already in the file, but probably needs to be uncommented and modified. Enter the IP address of the LDAP server as well as the DN for an administrative user.
ldap { server = “x.x.x.x” identity = “cn=admin,dc=example,dc=com” password = password basedn = “dc=example,dc=com” filter = “(uid=%{Stripped-User-Name:-%{User-Name}})” }
Step 3: Restart freeradius
Now restart freeradius.
/etc/init.d/freeradius restart
CategoryNetwork | CategorySystemAdministration | CategorySoftware | ToDo: review/refactor/group/merge with other Samba pages