Differences between revisions 18 and 21 (spanning 3 versions)
⇤ ← Revision 18 as of 2013-11-25 11:17:27 →
Size: 7343
Editor: ?Sylvestre Ledru
Comment: typo
← Revision 21 as of 2014-01-21 12:52:41 → ⇥
Size: 6668
Editor: ?pot
Comment: put commands between {{{ and }}}, remove spurious capitalization and white spacing
Deletions are marked like this. Additions are marked like this.
Line 29: Line 29:
  # aptitude install pulseaudio  {{{
# aptitude install pulseaudio
}}}
Line 37: Line 39:
Many people have a multi-channel sound cards, but use the speakers for the two channels. PulseAudio has no default settings for surround sound support. To enable all channels, edit the file / etc / pulse / daemon.conf: uncomment default-sample-channels (ie remove the semicolon at the beginning of the line) and set it to 6 if you System 5.1 or 8, if your system is 7.1. Many people have a multi-channel sound cards, but use the speakers for the two channels. PulseAudio has no default settings for surround sound support. To enable all channels, edit the file {{{/etc/pulse/daemon.conf}}}: uncomment {{{default-sample-channels}}} (ie remove the semicolon at the beginning of the line) and set it to 6 if you System 5.1 or 8, if your system is 7.1.
Line 39: Line 41:
{{{
Line 45: Line 48:
}}}
Line 50: Line 55:
If we update or some time later Pulseaudio stopped correctly determine the input / output devices and sources, try to clear the configuration files pulseaudio. To do this, delete the folder: ~ /. Pulse, ~ /. Pulse-cookie and / tmp/.esd- *. Forcibly end the process pulseaudio command: If we update or some time later Pulseaudio stopped correctly determine the input / output devices and sources, try to clear the configuration files pulseaudio. To do this, delete the folder: {{{~/.pulse}}}, {{{~/.pulse-cookie}}} and {{{/tmp/.esd-*}}}. Forcibly end the process pulseaudio command:
Line 52: Line 57:
{{{
# killall -9 pulseaudio
}}}
Line 53: Line 61:
# Killall -9 pulseaudio
Line 56: Line 63:
{{{
$ pulseaudio --start
}}}
Line 57: Line 67:
$ Pulseaudio - start
If that does not work well and remove the / etc / pulse and reinstall PulseAudio.		 If that does not work well and remove the {{{/etc/pulse}}} directory and reinstall PulseAudio.
Line 65: Line 74:
If a low-power machine having wheezing, in / etc / pulse / daemon.conf list the following:
Line 67: Line 75:
If a low-power machine having wheezing, in {{{/etc/pulse/daemon.conf}}} list the following:
Line 68: Line 77:
{{{
Line 75: Line 85:
Interrupting play in Amarok when running Skype
Comment out or remove the line in the / etc / pulse / default.pa		 }}}
Line 78: Line 87:

load-module module-cork-music-on-phone
Excessive CPU usage and distortion
Add a line to / etc / pulse / default.pa


load-module module-udev-detect tsched = 0
Sound level is low or low sound
Add a line to / etc / pulse / daemon.conf:


flat-volumes = no
Various problems with Skype and Wine
Add or uncomment the line in / etc / pulse / daemon.conf


default-fragments = 25
default-fragment-size-msec = 25


Wheezing and audio interruptions
If a low-power machine having wheezing, in / etc / pulse / daemon.conf list the following:


high-priority = no
nice-level = -1
realtime-scheduling = yes
realtime-priority = 5
flat-volumes = no
resample-method = speex-float-1
default-sample-rate = 48000
Line 112: Line 90:
{{{
Line 114: Line 92:
}}}
Line 118: Line 97:
{{{
Line 120: Line 99:
}}}
Line 123: Line 103:
 flat-volumes = no
{{{
flat-volumes = no
}}}
Line 128: Line 111:
{{{
Line 131: Line 114:
}}}
Line 138: Line 122:
/usr/share/alsa/alsa.conf.d/. Without these files in place, the regular alsa defaults will be used. Therefore, to achieve the default alsa behavior with the pulseaudio package installed, divert these files {{{/usr/share/alsa/alsa.conf.d/}}}. Without these files in place, the regular alsa defaults will be used. Therefore, to achieve the default alsa behavior with the pulseaudio package installed, divert these files
Line 140: Line 124:
{{{
Line 148: Line 132:
}}}
Line 152: Line 136:
{{{
Line 168: Line 152:
}}}
Line 169: Line 154:

If a user wishes to switch between pulse and non-pulse on a quasi-regular basis, put the above into the ~/.asoundrc.pulse instead and symlink it to ~/.asoundrc when pulse is desired		 If a user wishes to switch between pulse and non-pulse on a quasi-regular basis, put the above into the {{{~/.asoundrc.pulse}}} instead and symlink it to {{{~/.asoundrc}}} when pulse is desired
{{{
Line 173: Line 157:
}}}
Line 175: Line 159:
{{{
Line 177: Line 161:
}}}
Line 179: Line 163:
{{{
Line 181: Line 165:
}}}

PulseAudio

Contents

  1. Introduction
  2. Installing PulseAudio
  3. Surround sound system
  4. Solving Problems
    1. The lack of playback devices or audio capture
    2. Front Panel Jacks not working
    3. Wheezing and audio interruptions
    4. Interrupting play in Amarok when running Skype
    5. Excessive CPU usage and distortion
    6. Sound level is low or low sound
    7. Various problems with Skype and Wine
  5. Advanced
    1. Dynamically enable/disable
    2. Install from source
      1. Download
      2. Configure
      3. Build
      4. Install

Hardware - Sound

Introduction

PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32. It is a replacement for ESoundDaemon.

Here are some features of PulseAudio:

  • High quality software mixing of multiple audio streams with support for more than one entrance(source) and exit(sink).
  • Can be used to combine multiple sound cards into one (with frequency rate).

  • Large set of supported client libraries. Applications that use ESD, ALSA, oss, libao and GStreamer, are supported without the need to any changes to them. Modules for PulseAudio is available for xmms and mplayer.

  • Low latency, and a very accurate measurement delay time for recording and playback. Ability to fully synchronize multiple playback streams.
  • Network transparency: the application can play or record audio on a computer other than the one on which they run.
  • Extensible architecture with modules for jackd, multicast-rtp, lirc and avahi, among others.

Installing PulseAudio

# aptitude install pulseaudio

Since at least squeeze, installing pulseaudio through apt in this way should result in a pulseaudio system that "just works". Pulseaudio becomes the default when the package is installed. Everything (including flash) will use it.

This can be checked by with pavucontrol (in the pavucontrol package). If the sound is registering in the vu vumetre of that program, then it is being routed through the pulse system.

Surround sound system

Many people have a multi-channel sound cards, but use the speakers for the two channels. PulseAudio has no default settings for surround sound support. To enable all channels, edit the file /etc/pulse/daemon.conf: uncomment default-sample-channels (ie remove the semicolon at the beginning of the line) and set it to 6 if you System 5.1 or 8, if your system is 7.1. 

# Default
default-sample-channels = 2
# To 5.1
default-sample-channels = 6
# To 7.1
default-sample-channels = 8

After making the changes, restart Pulseaudio.

Solving Problems

The lack of playback devices or audio capture

If we update or some time later Pulseaudio stopped correctly determine the input / output devices and sources, try to clear the configuration files pulseaudio. To do this, delete the folder: ~/.pulse, ~/.pulse-cookie and /tmp/.esd-*. Forcibly end the process pulseaudio command: 

# killall -9 pulseaudio

Then run: 

$ pulseaudio --start

If that does not work well and remove the /etc/pulse directory and reinstall PulseAudio.

Front Panel Jacks not working

As of wheezy, for some reason, pulseaudio does not see the toggle feature of some cards (i.e. CMI8788 [Oxygen HD Audio]) exposed by ALSA and playing with the pulseaudio interface (pavucontrol) won't bring happiness. The trick, (for now?), is to bring up the alsamixer ( or alsamixergui) and the audio output can be switched from the read of the card to the front-panel as well as the mic input.

Wheezing and audio interruptions

If a low-power machine having wheezing, in /etc/pulse/daemon.conf list the following: 

high-priority = no
nice-level = -1
realtime-scheduling = yes
realtime-priority = 5
flat-volumes = no
resample-method = speex-float-1
default-sample-rate = 48000

Interrupting play in Amarok when running Skype

Comment out or remove the line in the / etc / pulse / default.pa 

load-module module-cork-music-on-phone

Excessive CPU usage and distortion

Add a line to / etc / pulse / default.pa 

load-module module-udev-detect tsched = 0

Sound level is low or low sound

Add a line to / etc / pulse / daemon.conf: 

flat-volumes = no

Various problems with Skype and Wine

Add or uncomment the line in / etc / pulse / daemon.conf 

default-fragments = 25
default-fragment-size-msec = 25

Advanced

Dynamically enable/disable

As mentioned above, all sound will automatically be routed thorugh pulseaudio when the pulseaudio package is installed. These instructions describe how to disable it with the pulseaudio package still installed. Individual users can then reenable it themselves as needed.

The "just works" magic is achieved through configuration files placed in /usr/share/alsa/alsa.conf.d/. Without these files in place, the regular alsa defaults will be used. Therefore, to achieve the default alsa behavior with the pulseaudio package installed, divert these files 

mkdir /usr/share/alsa/alsa.conf.pulse/

dpkg-divert --divert /usr/share/alsa/alsa.conf.pulse/pulse.conf --rename  /usr/share/alsa/alsa.conf.d/pulse.conf

dpkg-divert --divert /usr/share/alsa/alsa.conf.pulse/99-pulseaudio-default.conf.example  --rename  /usr/share/alsa/alsa.conf.d/99-pulseaudio-default.conf.example

dpkg-divert --divert /usr/share/alsa/alsa.conf.pulse/50-pulseaudio.conf --rename  /usr/share/alsa/alsa.conf.d/50-pulseaudio.conf

Now if a user wishes to use pulseaudio, they can create an ~/.asoundrc file that looks something like 

 @hooks [
         {
                 func load
                 files [
                         {
                                 @func concat
                                 strings [
                                         { @func datadir }
                                         "/alsa.conf.pulse/"
                                 ]
                         }
                 ]
                 errors false
         } 
 ]

If a user wishes to switch between pulse and non-pulse on a quasi-regular basis, put the above into the ~/.asoundrc.pulse instead and symlink it to ~/.asoundrc when pulse is desired 

ln -s ~/.asoundrc.pulse ~/.asoundrc

and remove it when not 

rm ~/.asoundrc

be sure also when disabling pulse to kill the server so that other things can directly access the soundcard again 

killall pulseaudio

Install from source

Seems as though there ought to be some general instructions for building things from source in Debian, but I couldn't find them when editing this.

Download

from here:

http://www.freedesktop.org/wiki/Software/PulseAudio/Download/

Configure

???

Build

make

Install

Put it somewhere. Make some links so programs can find it.

  • Reference:

http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/PerfectSetup/

CategoryHardware