Update overall support status - sparc32 was dropped long ago and sparc is not a release architecture
Remove some dead links
|Deletions are marked like this.||Additions are marked like this.|
|Line 11:||Line 11:|
|Running Sarge on sun4c machines: SparcSun4c
|Line 16:||Line 14:|
Tracking the status of the kernel: SparcKernelStatus
Debian on Sparc
Debian was supported on SunSparc machines starting with the release of Debian GNU/Linux 2.1 in March 1999.
Sparc32 support was dropped after Debian 4.0 (etch)
- sparc64 is in poor shape in Debian 7 (wheezy) and will not be included in later releases
This page is supposed to help in tracking various Sparc-related issues, including current critical bugs (with relevant links and work arounds), installer issues and the like.
Installation notes for various machines and methods: SparcInstallationNotes
Tracking the porting progress: SparcPorting
Tips and tricks for running X (X.org) on Sparc: XorgOnSparc
Like all ports there needs to be work done to keep things running. Sparc was dropped from Jessie on April 27th. dropping sparc message. In this section will be a list of the show stopping bugs that are preventing sparc from being a fully supported port. Many of the bugs right now come from using outdated versions of the kernel or just simply bugs in the build processes. Hopefully these can be corrected and sparc can continue to be part of the debian ecosystem.
strcmp() on sparc64 can return wrong result Upstream and related to this issue.
Support for UPA graphics cards on ultrasparc machines with onboard graphics
Some ultrasparc machines (eg. Ultra 10) have both onboard graphics and a UPA slot which can hold a graphics card (eg. Creator 3D). The default debian kernel/initrd contains all the graphics drivers which are in the linux kernel. This may result in the prom using a different graphics card for the console then the linux kernel. Worse, the graphics card chosen by linux for the console display may not have been initialized by the prom, which may cause the card to output a wrong video signal or no video signal at all. A workaround for this problem is to disable the onboard graphics in the prom if an UPA graphics card is installed. This can be done as follows :
1) Enter the prom (eg. by pressing stop-A)
2) Enter the following commands at the ok prompt :
0: probe-all install-console banner 1: " /pci@1f,0/pci@1,1/SUNW,m64B@2" $delete-device drop 2: ^C (Type control-C)
ok setenv use-nvramrc? true
use-nvramrc? = true
3) Note that there might be 'devalias ...' lines in the nvramrc already. Just keep them in by pressing enter.