Differences between revisions 1 and 3 (spanning 2 versions)
Revision 1 as of 2005-01-30 10:20:38
Size: 5737
Editor: anonymous
Comment:
Revision 3 as of 2005-01-30 10:53:55
Size: 5203
Editor: anonymous
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
These instructions are to install PocketWorkstation with X-Qt on the SL-6000 Sharp ROM. These instructions were to install PocketWorkstation with X-Qt on the SL-6000 Sharp ROM. It will probably work on most of the other Zaurus models, but not positive.
Line 4: Line 4:
## How much of this document is 6000 specific? Maybe this document should only hold the internal wireless hacks, and the rest put into it's own X/Qt document ##
Line 10: Line 9:
It's also recommended to install a copy of !["OpenSSH"]. It will be a great deal easier to install packages, edit config files, and any other preporation work needed remotely. You can download the packages you need from http://www.externe.net/zaurus/feeds/6000/ It's also recommended to install a copy of !["OpenSSH"]. It will be a great deal easier to install packages, edit config files, and any other preporation work needed remotely.
Line 13: Line 12:
The first step towards a working Debian setup is to have a working copy of X/Qt installed. X/Qt must be installed onto an ext2 formatted filesystem, the internal memory will work fine. The first step is to have a working copy of X/Qt installed. X/Qt must be installed onto an ext2 formatted filesystem, the internal memory will work fine.
Line 39: Line 38:
##If any of the above information was incorrect, please edit this page and make the changes of what worked for you. I wrote all of this from memory.## ##If any of the above information was incorrect, please edit this page and make the changes of what worked for you. I wrote all of this off memory.##
Line 104: Line 103:
Now it's time to start X/Qt. Click on the !StartX icon and wait for ["IceWM"] to appear. Now it's time to start X/Qt. Click on the !StartX icon and wait for !["IceWM"] to appear.
Line 110: Line 109:
##This home directory might need to be linked before you can boot into ["IceWM"]. I'm not sure, if someone tries it and you get away with doing it afterwords remove this note##

=== Setting Up Wireless Internet ===
The internet can be controlled through Qtopia as it always has been. However the up and down scripts don't create a resolv.conf file for the chroot environment when using DHCP.
Add to the bottom of the /etc/pcmcia/network.functions file:{{{
  cp /etc/resolv.conf /usr/mnt.rom/cf/debroot/etc
}}}
##This home directory might need to be linked before you can boot into !["IceWM"]. I'm not sure, if someone tries it and you get away with doing it afterwords remove this note##

These instructions were to install PocketWorkstation with X-Qt on the SL-6000 Sharp ROM. It will probably work on most of the other Zaurus models, but not positive.


Before you can begin, a method of transfering files from the internet to your PDA must be established.

The most convienent and straightforward method is to just have Internet available on the PDA itself. That will allow you to use the ipkg package manager. There are many ways this can be done, for example using the built-in wireless, or masquerading through the USB TCP/IP connection.

It's also recommended to install a copy of !["OpenSSH"]. It will be a great deal easier to install packages, edit config files, and any other preporation work needed remotely.

Installing X/Qt

The first step is to have a working copy of X/Qt installed. X/Qt must be installed onto an ext2 formatted filesystem, the internal memory will work fine.

If the PDA has access to the internet, the easiest way to install is to use the testing feed available from the X/Qt sourceforge site.

  1. Open a terminal
  2. Add http://xqt.sourceforge.jp/feed-testing/ to the end of the file /etc/ipkg.conf

  3. Type ipkg update
  4. Type ipkg install xqt-server xqt-fonts-misc xbase-etc xqt-startup-scripts

If internet access is still unavailable, download/copy to the PDA all the following packages from http://xqt.sourceforge.jp/feed-testing/.

  • xqt-server 0.0.10 (1.9.0 doesn't work)
  • xqt-fonts-misc
  • xbase-client
  • xbase-etc
  • xlibs
  • blackbox
  • rxvt
  • xqt-startup-scripts

Open up a terminal and install each of these packages.

  ipkg install xqt-server_0.0.10 xqt-fonts-misc_X.X.X... etc

Now there are two new icons available under the Apps tab of your Zaurus, X/QT Server, and Start X.

Installing Debian GNU/Linux

PocketWorkstation will need to be installed onto a ext2 filesystem with at least ["195MB"] of free space for the big package. When you start to install more software and libraries, another ["200MB"]-["300MB"] will quickly be needed.

Because more space is needed then is available on the internal memory, a memory chip will need to be formatted and used. Refer to the following table when needed.

Type

Filesytem

Mount Point

SD Card

/dev/mmcda1

/usr/mnt.rom/card

CF Card

/dev/hda1

/usr/mnt.rom/cf

Formatting a memory card

1. Open a terminal.

2. Unmount the filesystem being used.

  umount /usr/mnt.rom/[cf or card]

3. Format the filesystem as ext2.

  mkfs.ext ''dev''[mmcda1 or hda1]

4. Remount the filesystem.

  mount /usr/mnt.rom/[cf or card]

Extracting Debian

Plug your Zaurus into AC Power while extracting! You don't want the unit to suspend in the middle of all your hard work.

Copy the following files onto the ext2 filesystem you just formated.

Change to the directory with the above files and type:

  1. gunzip gnu-tar.gz
  2. chmod 755 gnu-tar
  3. mkdir debroot
  4. ./gnu-tar -C debroot -xvzpf zaurus-debian-big-v0.17.tgz

Final setup procedures

Download a new keymap so the keys work correctly in X/Qt into the folder /home/zaurus

  http://w3.mecanica.upm.es/~smuelas/.xmodmaprc

Open /home/zaurus/.xinitrc and modify the LANG variable to look like this (if you speak US english):

  export LANG=en_US

then remove the last two lines

  rxvt &
  blackbox

All X software will be run under the chroot environment, so this software is useless. It was only installed to give the .xinitrc file to work from. Now add to the bottom of the .xinitrc file:{{{

  • xmodmap /usr/mnt.rom/[cf or card]/debroot/root/.xmodmaprc

    su -c 'chroot /usr/mnt.rom/[cf or card]debroot /startd'

}}} Create a new file /usr/mnt.rom/[cf or card]/debroot/startd

  #!/bin/sh
  #Startup Commands
  export DISPLAY=0:0
  swapon /swapfile
  /usr/bin/icewm-session
  #Shutdown Commands
  swapoff -a

Fix the permissions on the new startd file

  chmod 755 /usr/mnt.rom/[cf or card]/debroot/startd

Create a swap file

  1. Change to your debroot directory
  2. dd if=/dev/zero of=swapfile bs=1024 count=65536
  3. mkswap swapfile

This will create a ["64MB"] swap file.

Now it's time to start X/Qt. Click on the !StartX icon and wait for !["IceWM"] to appear.

The first time you chroot into debian you should create a link between /root and /home/root

  ln -s /root /home/root

Other Resources: