Title: Clarifying policies and workflows for Non Maintainer Uploads (NMUs) DEP: 1 State: DRAFT Date: 2008-02-12 Drivers: Lucas Nussbaum <firstname.lastname@example.org>, Bas Wijnen <email@example.com> URL: http://wiki.debian.org/NmuDep Abstract: This document aims at clarifying the policies and workflows used for NMUs inside Debian. Its main goal is to provide a patch to section 5.11 of the Debian Developer's Reference, adressing the current issues regarding NMUs.
Introduction and Motivation
In Debian, each package is "owned" by its maintainer, or by a small group of maintainers, in the case of team maintenance. Modifying the package requires going through those developers, which sometimes add a long, unnecessary delay, especially in the case of inactive or busy maintainers.
Non-maintainer uploads (NMUs) alleviate this problem, by allowing any developer to upload a new version of another maintainer's package. However, the current rules for NMUs are not very clear, so:
- many developers prefer not to do NMUs.
- different developers understand the rules differently, leading to different opinions on what's allowed or not.
- NMUs are often received with angry comments from maintainers.
This Debian Enhancement Proposal has two goals:
- improve section 5.11 of the Developer's Reference, to clarify it and address the current issues about NMUs
- improve related tools, like the nmudiff script in the devscripts package.
Proposed section 5.11: Non-Maintainer Uploads (NMUs)
Every package has one or more maintainers. Normally, these are the people who work on and upload new versions of the package. In some situations, it is useful that other developers can upload a new version as well, for example if they want to fix a bug in a package they don't maintain. Such uploads are called Non-Maintainer Uploads (NMU).
NMUs can happen for various reasons, the most usual one being to fix bugs. There are some rules to follow when doing an NMU. These are explained below. An NMU is allowed for any reason, as long as those rules are followed.
5.11.1 When and how to do an NMU
There are no strict rules for NMUs, because there are many different situations. However, before doing an NMU, consider the following questions:
- Do you really fix bugs in your NMU? Fixing cosmetic issues, or changing the packaging style in NMUs is discouraged, unless it is required to fix bugs.
- Did you give enough time to the maintainer? Did you make your patch available to the maintainer? For how long? Being busy for a week or two isn't unusual. Is the bug so severe that it needs to be fixed right now, or can it wait a few more days?
- Did you make it perfectly clear that you would upload an NMU? Just sending a patch to the BTS doesn't mean that you would do an NMU.
- How confident are you about your changes? Please remember the Hippocratic Oath: "Above all, do no harm." It is better to leave a package with an open grave bug than applying a non-functional patch, or one that hides the bug instead of resolving it. If you are not 100% sure of what you did, it might be a good idea to seek advice from others. Remember that if you break something in your NMU, many people will be very unhappy about it.
In most cases, the above points should not make you reconsider doing an NMU. Fixing bugs is what really matters (but only real bugs, and only really fixing them).
While there are no general rules, after the patch is available in the BTS, and you mention your intention to upload an NMU, it's recommended to wait at least one week before doing the upload.
Sometimes, release managers decide to allow NMUs with shorter delays for a subset a bugs (e.g release critical bugs older than 7 days). Also, some maintainers listed themselves in the [http://wiki.debian.org/LowThresholdNmu Low Threshold NMU list], and accept that NMUs are uploaded without delay. But even in those cases, it's still a good idea to give the maintainer a few days to react before you upload, especially if the patch wasn't available on the BTS before, or if you know that the maintainer is generally active.
126.96.36.199 NMUs and debian/changelog
Just like any other (source) upload, NMUs must add an entry to debian/changelog, telling what has changed with this upload. The first line of this entry is special, it must be
- Non-maintainer upload.
For non-native packages, the version of the changelog entry must be the upstream version, plus a Debian revision, just like it is for a maintainer upload. However, the debian revision should be of the form x.y, where x is one less than the next to be released normal Debian revision number for this upstream version, and y is a counter starting at 1. For example, if the current version is 1.5-3, then an NMU would get 1.5-3.1 for the version. If a new upstream version is packaged in the NMU, the version would become 1.6-0.1. If there is no debian-revision component in the version number then one should be created, starting at 0.1.
For native packages, the version must be the version of the last maintainer upload, plus +nmux, where x is a counter starting at 1. If the current version is 1.5, then an NMU would get version 1.5+nmu1.
This special versioning is needed to avoid stealing one of the package maintainer's version numbers, which might disrupt their work. It also has the benefit of making it visually clear that a package in the archive was not made by the official maintainer.
If you upload a package to testing or stable, you sometimes need to "fork" the version number tree. This is the case for security uploads, for example. For this, a version of the form +debxyrz should be used, where x is the current stable major release number, and y is the current minor release number for a stable upload, or one higher than that for a testing upload. z is a counter starting at 1. For example, while Etch (Debian 4.0) is stable, a security NMU to stable for a package at version 1.5-3 would have version 1.5-3+deb40r1, while a security NMU to Lenny would get version 1.5-3+deb41r1. This is the case, even when it is already known that the next release will be a new major version.
188.8.131.52 Using the DELAYED/ queue
After asking the maintainer for the permission to upload your NMU, it is often annoying to have to wait for some time before you actually make the upload.
The DELAYED queue (FIXME: link to 5.6.2) allows the developer doing the NMU to perform all the necessary tasks at the same time. Instead of telling the maintainer that you will upload the updated package in (for example) 7 days, you can upload the package to DELAYED/7 and tell the maintainer that he has 7 days to react. During this time, the maintainer can ask you to delay the upload some more or cancel your upload.
The DELAYED queue should not be used to put additional pressure on the maintainer. In particular, it's important that you are available to cancel or delay the upload before the delay expires (the maintainer cannot cancel the upload himself).
If you make an NMU to DELAYED, and the maintainer updates his package before the delay expires, your upload will be rejected, because a newer version (the maintainer's one) is already available in the archive. Normally, the maintainer should take care to include your proposed changes (or at least a solution for the problems they address) in that upload.
5.11.2 NMUs, from the maintainer point of view
When someone NMUs your package, this means they want to help you to keep it in good shape. This saves you work, and gives users fixed packages faster. You can consider asking the NMUer to become a co-maintainer of the package.
If someone suggests that they could do an NMU on your package, you should be thankful that they want to put time into this, while it is really your responsibility to fix the bug. Receiving an NMU on a package is not a bad thing; it just means that the package is interesting enough for other people to work on it.
When a package has been NMUed, the maintainer should acknowledge it in the next upload. This makes clear that the changes were accepted in the maintainer's packaging, and that they aren't lost again. For this, you must first incorporate the changes into your packaging, by applying the patch that was sent. Make sure to include the NMU's changelog entry in your own changelog. This is important to allow the BTS version tracking to work.
In the past, bugs fixed in NMUs were tagged fixed in the BTS, and you had to use the -v option of dpkg-buildpackage to include the NMU's changelog entry in the .changes files. This is no longer necessary.
5.11.3 Source NMUs vs Binary-only NMUs (binNMUs)
The full name of an NMU is source NMU. There is also another type, namely the binary-only NMU, or binNMU. A binNMU is also a package upload by someone other than the package's maintainer. However, it is a binary-only upload. There are some reasons why this can be useful:
- Buildds upload packages for their architecture to the archive as binary-only uploads. Strictly speaking, these are binNMUs.
- When a library (or other dependency) is updated, the packages using it may need to be rebuilt. Since no changes to the source are needed, the same source package is used.
BinNMUs are usually done by porters and buildds. They add an entry to debian/changelog, explaining why the upload was needed and increasing the version number as described in paragraph 184.108.40.206. This entry should not be included in the next upload.
5.11.4 NMUs vs QA uploads
NMUs are uploads of packages which are owned by another maintainer. There is another type of upload where the uploaded package is not yours: QA uploads. QA uploads are uploads of orphaned packages.
QA uploads are very much like normal maintainer uploads: they may fix anything, even minor issues; the version numbering is normal, and there is no need to use a delayed upload. The difference is that you are not listed as the Maintainer or Uploader for the package. Also, the changelog entry of a QA upload has a special first line:
- QA upload.
If you want to do an NMU, and it seems that the maintainer is not active, it is wise to check if the package is orphaned. When doing the first QA upload to an orphaned package, the maintainer should be set to Debian QA Group < firstname.lastname@example.org >. Orphaned packages which did not have a QA upload yet still have their old maintainer set. There is a list of them at http://qa.debian.org/orphaned.html.
Instead of doing a QA upload, you can also consider adopting the package by making yourself the maintainer. You don't need permission from anybody to adopt an orphaned package, you can just set yourself as maintainer and upload the new version ([http://www.debian.org/doc/developers-reference/ch-pkgs.en.html#s-adopting details here]).
Currently, nmudiff uses the following default email:
Hi, The following is the diff for my $SOURCE $VERSION NMU.
It is proposed that this will be changed to:
[Replace XX with correct value] Dear maintainer, I prepared an NMU for $SOURCE (versioned as $VERSION) to fix this bug. I uploaded it to DELAYED/XX. Don't hesitate to tell me if you want me to delay it some more. -- $DEBFULLNAME