Differences between revisions 8 and 11 (spanning 3 versions)
Revision 8 as of 2012-05-31 14:31:33
Size: 5884
Editor: wookey
Comment:
Revision 11 as of 2012-06-12 13:01:36
Size: 5979
Comment: dpkg-architecture --add-architecture doesn't exist
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
Packages are now specified as 'Package:Architecture' pretty-much anywhere that was previously just 'Package', so we have libc:i386 and lib:amd64. The bare name 'package' refers to the current machine architecture. Packages can now be specified as 'Package:Architecture' pretty-much anywhere that was previously just 'Package', so we have libc:i386 and libc:amd64, unfortunately the semantics in dpkg and apt are slightly different so you might get different results. The bare name 'package' refers to the current machine architecture.
Line 41: Line 41:
dpkg-architecture --add-architecture armhf dpkg --add-architecture armhf

Multiarch lets you install packages from multiple architectures on the same machine. This is useful in various ways, but the most common is installing both 64 and 32-bit software on the same machine and having dependencies correctly resolved automatically.

Concepts

There is a current machine architecture, as printed by dpkg --print-architecture. It is built-in to the currently installed dpkg package.

Packages can now be specified as 'Package:Architecture' pretty-much anywhere that was previously just 'Package', so we have libc:i386 and libc:amd64, unfortunately the semantics in dpkg and apt are slightly different so you might get different results. The bare name 'package' refers to the current machine architecture.

Other available architectures are shown by dpkg --print-foreign-architectures. dpkg will manage packages for these architectures as well as the machine architecture.

There is a 'Multi-Arch' header in the package metadata of any multiarch-aware package.

Existing packages work fine in a multiarch environment, just as before, but to gain the benefits of co-installation or cross-architecture dependencies, many packages need to be made 'multiarch-aware'.

  • For an unchanged package you can choose which arch version of a package to install (e.g. 'amd64' or 'i386').
  • If a package is marked 'Multi-Arch: foreign', then it can satisfy dependencies of a package of a different architecture (e.g 'make:amd64' will satisfy a dependency on make for any-architecture package).
  • To enable more than one architecture version of a package to be installed at the same time (generally libraries and dev- packages) files need to be moved so they don't clash. These packages are marked 'Multi-Arch: same'.

Packages marked 'Multi-Arch : allowed also exist which can be treated as either :same or :foreign depending on how they are depended-on.

Packagers are currently working through the distro, starting with the most useful packages for making multi-arch aware. See the multiarch spec and implementation howto for details of how it all actually works, and how to update packages to take advantage of the functionality.

Availability

You need a multiarch-aware dpkg and apt.

In Debian dpkg this is present since 1.16.2. In Ubuntu this is present since natty (v1.15.8.10ubuntu1). Check by seeing if dpkg --print-foreign-architectures is understood.

Apt is multiarch-aware if it supports -o APT::Architectures. This is available from version 0.8.13 onwards. However there are many multiarch-related improvements and bug-fixes in later apt versions, such as apt-get build-dep -a cross-dependency support, so the later the better in general up to at least 0.9.4.

Prior to apt 0.9 in Debian, dpkg can get stuck during upgrades when it is not told which arch package it should be configuring by apt. (dpkg: error: --configure needs a valid package name but 'gcc-4.7-base' is not: ambiguous package name 'gcc-4.7-base' with more than one installed instance) dpkg --configure -a will unbung this.

Usage

Configuring architectures

To add an extra architecture (in Debian from dpkg 1.16.2 onwards):

dpkg --add-architecture <arch>

e.g.

dpkg --add-architecture armhf

To remove an achitecture

dpkg --remove-architecture <arch>

dpkg architectures are stored in /var/lib/dpkg/arch.

Note that the Ubuntu dpkg in natty (1.16.0~ubuntu7 (reports 1.15.8.10)), oneiric and precise (1.16.1.2ubuntu7) uses a different syntax:

echo "foreign-architecture armhf" > /etc/dpkg.cfg.d/architectures

setting up apt sources

Apt defaults to using the set of architectures reported by dpkg, and any unqualified architecture deb lines in /etc/apt/sources.list, which is usually what you wanted. This can be overridden using APT::Architecture=<arch> to set the defalt architecture or APT::Architectures="<arch> <arch>".

apt-sources can be architecture qualified with this syntax. This is very useful on Ubuntu's split archive. It is not normally necessary on Debian unless your normal archive does not mirror the extra architectures you are intereted in.

deb [arch=amd64,i386] http://uk.archive.ubuntu.com/ubuntu/ quantal main universe
deb [arch=armel,armhf] http://ports.ubuntu.com/ubuntu-ports quantal main universe

Arch-qualifying deb-src lines doesn't make any sense.

Don't forget to apt-get update after adding new architectures.

Installing/removing packages

To install a package of the non-default architecture just specify that architecture on the command line:

apt-get install package:architecture

That package's dependencies will be installed automatically for the correct architectures (same-arch library deps, machine-arch for other deps) e.g

apt-get install links:i386

dpkg -i package:architecture

Installing cross-dependencies

To install build-dependencies of a package before cross-building:

apt-get build-dep -a <arch> <package>

This only works when all the 'tools' packages depended-on are marked Multi-Arch: foreign, any depended-on libraries which are also needed on the BUILD machine, and -dev packages which are needed for both HOST and BUILD architectures are made co-installable ('Multi-Arch: same' with arch-qualified paths), and any exceptions to the default rules are marked package:any or package:native in the package source. This process is ongoing.

When it doesn't work you can often get the dependencies installed with a manual apt-get line: e.g instead of

apt-get build-dep -a armhf acl

, do

apt-get install autoconf automake debhelper gettext libtool libattr1-dev:armhf

Details of how this resolves are on https://wiki.ubuntu.com/MultiarchCross