This page describes how to install Debian on a MacBook Pro.

Most points are the same like the MacBook so we point out the differences only.

MacBook Pro specific bugs can be found at http://bugs.debian.org/cgi-bin/pkgreport.cgi?tag=macbook-pro;users=kraai@ftbfs.org.

Install Debian

See the MacBook Install Debian section.

If you press return at the ISOLINUX prompt, the kernel may panic while enabling the IO-APIC IRQs ([http://bugs.debian.org/381719 bug 381719]). To avoid this, enter "install noapic" at the ISOLINUX prompt.

Kernel

linux-2.6 2.6.18-3 supports MacBook Pros out of the box, but you'll need to ensure that the appletouch module is loaded before the usbhid module. You can do so by creating a file in /etc/modprobe.d that contains the following line:

install usbhid /sbin/modprobe appletouch && /sbin/modprobe --ignore-install usbhid $CMDLINE_OPTS

For some reason, this doesn't always work.

Using stock kernel and patch from svn

You can build your own kernel using the stock Linux kernel and the patches found in the [http://svn.sourceforge.net/viewvc/mactel-linux/trunk/ mactel-linux SVN]. Here is the steps to follow:

• download the source for the stock kernel from one of the kernel mirror,
• get the mactel-linux patches with svn:

  svn co https://svn.sourceforge.net/svnroot/mactel-linux/trunk mactel-linux-trunk

• apply all the mactel-linux patches:

  cd mactel-linux-trunk/kernel/mactel-patches-2.6.17
  vi version.patch   # if you are patching a kernel different than the svn one
  ./apply /where/you/have/the/kernel/sources

• copy the config from the svn (trunk/kernel/mactel-patches-2.6.17/config-2.6.17-MBP) to your kernel dir, with name .config,

• configure your kernel with make menuconfig, and control that CONFIG_FB_IMAC is not set,

• build your kernel (fakeroot make-kpkg ...,

• install your kernel (dpkg --install ...),

• reboot.

X Windows System

To use the X Windows System, install the non-free fglrx-driver package and, in the Device section of /etc/X11/xorg.conf, change the driver from "ati" to "fglrx".

Edit /etc/X11/xorg.conf and in the Module section, add the following line:

        Load "synaptics"

Replace the contents of the ?InputDevice section with the "Configured Mouse" identifier with the following:

        Identifier      "Configured Mouse"
        Driver          "synaptics"
        Option          "CorePointer"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "MinSpeed"              "1.0"
        Option          "MaxSpeed"              "1.0"

Once this is done, tapping the touchpad with two fingers should generate a middle-button click and tapping it with three fingers will generate a right-button click.

Note To have it working, you need to have a kernel with at least:

• CONFIG_INPUT_MOUSEDEV_PSAUX=y
• CONFIG_INPUT_EVDEV=y
• CONFIG_USB_HID=m
• CONFIG_USB_APPLETOUCH=m

Wireless

See the MacBook Wireless section.

Sound

See the MacBook Sound section.

With a Core 2 Duo MacBook Pro and kernel 2.6.18-3-amd64 sound only works with the headphone but no speaker output.

cpufreq

See the MacBook cpufreq section.

infra red receiver

See the MacBook infra red receiver section.

iSight

See the MacBook iSight section.

Plan

Here's what needs to be done:

• Figure out how to use a free software graphics driver for the X Windows System.
• Figure out how to make tapping the touchpad with a single finger generate a left-button click.
• Figure out how to install ELILO.
• Figure out how to make the touchpad speed default to a usable value.
• Figure out how to suspend and resume.
• Figure out how to use the remote control.

?CategoryLaptop ?CategoryLaptop