Differences between revisions 2 and 3
Revision 2 as of 2013-04-25 15:07:14
Size: 8010
Editor: JonasOestman
Comment:
Revision 3 as of 2013-04-26 04:01:28
Size: 8082
Editor: PaulWise
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
/!\ This page should be moved into the InstallingDebianOn namespace.

/!\ This page should be moved into the InstallingDebianOn namespace.

Translation(s): none

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owner would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

Models covered
Satellite 1400-103

Sub-models (PS140E-03CSQ-SW) options :
- Video card (Intel or ATI radeon or ATI FireGL) (adapt this list to actually match options available. Common features are listed below)
- Screen size (14", 15", or 15" wide)
- Wireless card
- Disk and Ram size, optical device
- Other options, like fingerprint reader, bluetooth...

Overall Status

Core Components

[ATTACH]

Boot Standard Kernel:

{OK}

LAN network card:

{OK}

Detect CD/DVD:

{OK}

Detect hard drives:

{OK}

Extra Features

CPU Frequency Scaling

[?]

Hibernation

{X}

Sleep / Suspend

{X}

Xorg

{OK}

- OpenGL

{OK}

- Resize-and-Rotate(randr)

[?]

Switch to External Screen

[?]

Mouse

- Built-in (Trackpoint)

[-]

- Built-in (Touchpad)

{OK}

Modem

[-]

Wireless/Wifi

X-(

Keyboard's Hotkeys

{X}

Legend :
{OK} = OK ; {X} Unsupported(No Driver) ; /!\ = Error (Couldn't get it working); [?] Unknown, Not Test ; [-] Not-applicable
{i} = Configuration Required; X-( = Only works with a non-free driver and or firmware

Important Note

{X} Have to skip network installation because stock kernel with 6.0.1 (2.6.32) does not support wifi card (rtl8192se). Need to use LAN.

Configuration

Display

To get advanced 3D volume rendering working, one need to use fglrx-glx version 1:11-6-3 at least (1:10-9-3 does not work in some cases).

Section "Device"
    Identifier  "ATI"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "Default Screen"
    DefaultDepth     24
EndSection

Audio

Output of aplay -l gives:

**** List of PLAYBACK Hardware Devices ****
placeholder

Getting the internal mic is very difficult. So far only skype works when selecting: HDA Intel, ALC259 Analog (hw:0,0)

One need to also add to alsa-base.conf

options snd-hda-intel model=auto
options snd-hda-intel model=toshiba

Power Management

You have to edit /etc/default/grub and set:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
GRUB_CMDLINE_LINUX="acpi=copy_dsdt"

See bug in linux kernel:

WiFi

Card is a:

07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)

One need a linux kernel 3.0.0 image to get it to work and the non-free package firmware-realtek

           *-network
                description: Wireless interface
                product: RTL8191SEvB Wireless LAN Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:07:00.0
                logical name: wlan0
                version: 10
                serial: 1c:65:9d:ba:25:47
                width: 32 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=rtl8192se driverversion=3.0.0-1-amd64 firmware=N/A ip=192.168.0.21 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
                resources: irq:17 ioport:2000(size=256) memory:d1100000-d1103fff

Keyboard's Hotkeys

Unlikely to ever get it working. There is a patch on internet, but it has never been accepted upstream.

One cannot insert the toshiba_acpi module on these systems.

ACPI

Also unlikely to getting fix, see:

Laptop's fan are continuously running. acpi output is pretty scarce:

$ acpi  -V
Battery 0: Unknown, 99%
Battery 0: design capacity 4500 mAh, last full capacity 4324 mAh = 96%
Adapter 0: on-line
Cooling 0: LCD 0 of 7
Cooling 1: Processor 0 of 3
Cooling 2: Processor 0 of 3
Cooling 3: Processor 0 of 3
Cooling 4: Processor 0 of 3


System Summary

lspci

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
placeholder

lspnp

00:00 PNP0a08 (unknown)
placeholder

lsusb

lsusb -v | grep -E '\<(Bus|iProduct|bDeviceClass|bDeviceProtocol)' 2>/dev/null

Bus 002 Device 006: ID 0461:4d22 Primax Electronics, Ltd 
placeholder

USB Host controllers entries (without OHCI, UHCI, EHCI) are removed too.

Resources

Attachments

Some configuration files and sample outputs.

Credits