Differences between revisions 1 and 10 (spanning 9 versions)
Revision 1 as of 2011-05-18 16:53:59
Size: 8242
Editor: ?Flowd
Comment:
Revision 10 as of 2012-01-11 05:20:44
Size: 8034
Editor: ?Flowd
Comment: Wlan update for better understanding
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
~-Translation(s): [[de/InstallingDebianOn/HP/Mini210/Squeeze|Deutsch]]-~ ~-Translation(s): [[de/InstallingDebianOn/HP/Mini210/Wheezy|Deutsch]]-~
Line 48: Line 48:
Debian Wheezy has a really ugly defect. So, you are not able to use your keybord or mouse right after installing the system. The failure lies somewhere in /run, the fix is to remove that folder. More details below. Like Squeeze, Wheezy has a little inappropriate way of using the mousepad, but to fix it needs only a one-liner, as you can see below.
Line 74: Line 74:
== Mouse and keyboard==
If you boot Wheezy the first time after install, you will recognize fast that neither the mousepad nor the keyboard works in any way. That can easily fix with a one-line command.<<BR>>
The best way is to boot wheezy in save mode. The keyboard works fine in non grafik mode, it's just an issue with gnome. After logging in as root insert the line<<BR>>
rm -rf /run<<BR>>
and keyboard works fine under gnome. The mousepad works, but not really great, there is the known defect with the buttons. As in squeeze, type in <<BR>>
echo options psmouse proto=exps > /etc/modprobe.d/psmouse.modprobe.conf <<BR>>
and your mousepad will work usefull. But still zooming with two fingers and so on does not work.
== Mouse and keyboard ==
The mousepad works, but not really great, there is the known defect with the buttons. As in squeeze, type in <<BR>>
# echo options psmouse proto=exps > /etc/modprobe.d/psmouse.modprobe.conf <<BR>>
with root rights and your mousepad will work fine. Yet zooming with two fingers and so on does not work.
Line 89: Line 86:
Line 90: Line 88:
Open terminal in root and type:<<BR>><<BR>> Be sure, you have added non-free sources to your sources.list. Add the line<<BR>>
Line 92: Line 90:
aptitude update<<BR>>
aptitude install module-assistant wireless-tools<<BR>>
m-a a-i broadcom-sta<<BR>>
aptitude install firmware-b43-lpphy-installer<<BR>>
in /etc/apt/sources.list <<BR>>
Open terminal in root and type:<<BR>>
Line 97: Line 93:
The steps explain themself. # aptitude update<<BR>>
# aptitude install module-assistant wireless-tools<<BR>>
# m-a a-i broadcom-sta<<BR>>
# aptitude install firmware-b43-lpphy-installer<<BR>>
<<BR>>
Activate wlan: <<BR>>
# modprobe wl<<BR>>
<<BR>>
Now the command 'iwconfig' should list your wireless card.<<BR>>
<<BR>>
Alternative use of the [[wl|vendor driver]].
Line 131: Line 137:
== lsusb 1012eg== == lsusb 1012eg ==

Translation(s): Deutsch

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owners would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

If you need help to get Debian running on your hardware, please have a look at our user support channels where you may find specific channels (mailing list, IRC channel) dedicated to certain types of hardware.

HP Mini210 netbook

Sub-models (1012eg) options :
- Video card Intel: Graphics Media Accelerator 3150
- Screen size: 10" (1024x600)
- Wireless card: Broadcom Corporation BCM43225 802.11b/g/n
- Network card: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
- Disk 250GB (5400RPM)
- Memory 1GB DDR2

Overall Status

Core Components

[ATTACH]

Boot Standard Kernel:

{OK}

LAN network card:

{OK}

Detect CD/DVD:

[-]

Detect hard drives:

{OK}

Extra Features

CPU Frequency Scaling

{OK}

Hibernation

{OK}

Sleep / Suspend

{OK}

Xorg

{OK}

- OpenGL

{OK}

- Resize-and-Rotate(randr)

{OK}

Switch to External Screen

{OK}

Mouse

- Built-in (Touchpad)

{i}

Wireless/Wifi

X-( {OK} (Depends on version)

Keyboard

{i}

Webcam

{OK}

Legend :
{OK} = OK ; {X} Unsupported(No Driver) ; /!\ = Error (Couldn't get it working); [?] Unknown, Not Test ; [-] Not-applicable
{i} = Configuration Required; X-( = Only works with a non-free driver and or firmware

Important Note

Like Squeeze, Wheezy has a little inappropriate way of using the mousepad, but to fix it needs only a one-liner, as you can see below.
On the other Hand, Wheezy finally gets through the mounted partition issue, so that you don't have to manually update grub after installing via usb.
The best way to install Wheezy is to use unetbootin with the normal netinstall image from debian.org. Just choose the iso in unetbootin.

Configuration

Display

Works instantly.

Audio

Works instantly.

Mouse and keyboard

The mousepad works, but not really great, there is the known defect with the buttons. As in squeeze, type in
# echo options psmouse proto=exps > /etc/modprobe.d/psmouse.modprobe.conf
with root rights and your mousepad will work fine. Yet zooming with two fingers and so on does not work.

Power Management

Works everything out of the box.

WiFi

The best way I found out was to use the module-assistant to install broadcom-sta and then install the b43-firmware:
Be sure, you have added non-free sources to your sources.list. Add the line
deb http://ftp.us.debian.org/debian wheezy main contrib non-free
in /etc/apt/sources.list
Open terminal in root and type:

# aptitude update
# aptitude install module-assistant wireless-tools
# m-a a-i broadcom-sta
# aptitude install firmware-b43-lpphy-installer

Activate wlan:
# modprobe wl

Now the command 'iwconfig' should list your wireless card.

Alternative use of the vendor driver.

Webcam

Works out-of-the-box.


System Summary

lspci 1012eg

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
02:00.0 Network controller [0280]: Broadcom Corporation BCM43225 802.11b/g/n [14e4:4357] (rev 01)

lsusb 1012eg

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 090c:637b Feiya Technology Corp.

USB Host controllers entries (without OHCI, UHCI, EHCI) are removed too.

Credits

Like Squeeze Wheezy works nearly out of the box. I used Wheezy with the 2.6.38 Kernel. -- Flowd 2024-03-28 15:59:02