Translation(s): none

(!) ?Discussion

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owners would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

If you need help to get Debian running on your hardware, please have a look at our user support channels where you may find specific channels (mailing list, IRC channel) dedicated to certain types of hardware.

Models covered
GIGABYTE D525TUD mini-ITX mainboard

options :
- CPU Intel Dual core Atom CPU (1.8 Ghz)
- Chipset Intel NM10 - Lan 1 * Realtec RTL8111E chip (10/100/1000 Mbit)
- SATA RAID controller
- 4 SATA ports

Overall Status

Core Components

[ATTACH]

Boot Standard Kernel:

{OK}

LAN network card:

X-(

Detect CD/DVD:

{OK}

Detect hard drives:

{OK}

Extra Features

Serial ATA RAID

{i}

CPU Frequency Scaling

[?]

Hibernation

/!\

Sleep / Suspend

/!\

Xorg

{OK}

- OpenGL

{OK}

- Resize-and-Rotate(randr)

[?]

Switch to External Screen

[-]

Mouse

- Built-in (Trackpoint)

[-]

- Built-in (Touchpad)

[-]

Modem

[-]

Wireless/Wifi

[-]

Keyboard's Hotkeys

[?]

Legend :
{OK} = OK ; {X} Unsupported(No Driver) ; /!\ = Error (Couldn't get it working); [?] Unknown, Not Test ; [-] Not-applicable
{i} = Configuration Required; X-( = Only works with a non-free driver and or firmware

Important Note

During network installation you are asked for the firmware file rtl_nic/rtl8168e-2.fw. Put this file in the correpsonding directory on an usb-stick attached during installation. This file can be obtained from the firmware-realtek package.

Two SATA ports can be set up as a raid device. Use pci=noacpi dmraid=true as boot parameter for installation, see: Setting up Debian on a Serial ATA RAID device. After Using GRAID as label for the raid device in the bios setup a serail ata RAID jmicron_GRAID device is visible in the partition manager. However, it was not possible to install grub-pc on this device.

Configuration

Display

Audio

Mouse

Power Management

WiFi

System Summary

lspci

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)

lsusb

lsusb -v | grep -E '\<(Bus|iProduct|bDeviceClass|bDeviceProtocol)' 2>/dev/null 

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         0 Full speed (or root) hub
  iProduct                2 UHCI Host Controller
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         0 Full speed (or root) hub
  iProduct                2 UHCI Host Controller
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         0 Full speed (or root) hub
  iProduct                2 UHCI Host Controller
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         0 Full speed (or root) hub
  iProduct                2 UHCI Host Controller
Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
  bDeviceClass            0 (Defined at Interface level)
  bDeviceProtocol         0 
  iProduct                2 Mass Storage Device
      (Bus Powered)
  bDeviceClass            0 (Defined at Interface level)
  bDeviceProtocol         0 
  (Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         0 Full speed (or root) hub
  iProduct                2 EHCI Host Controller

USB Host controllers entries (without OHCI, UHCI, EHCI) are removed too.

Resources

Attachments

Some configuration files and sample outputs.

Credits

?CategeoryEmbedeedComputer