Differences between revisions 95 and 96
Revision 95 as of 2019-06-23 16:27:08
Size: 16647
Editor: devfra
Comment: General update and readability improvements
Revision 96 as of 2019-06-23 21:12:25
Size: 16647
Editor: devfra
Comment: Added picture of the T100TA
Deletions are marked like this. Additions are marked like this.
Line 32: Line 32:
||||<tablestyle="margin-left:3em;width:90%">'''Core Components'''||<|10 style="text-align:right;border-style:none;vertical-align:top;"> {{attachment:photo.png}}|| ||||<tablestyle="margin-left:3em;width:90%">'''Core Components'''||<|25 style="text-align:right;border-style:none;vertical-align:top;"> {{attachment:photo.jpg}}||

Translation(s): none

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owners would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

If you need help to get Debian running on your hardware, please have a look at our user support channels where you may find specific channels (mailing list, IRC channel) dedicated to certain types of hardware.

Models covered

ASUS Transformer Book T100TA-DK002DH



Intel Atom Bay Trail Z3740 (BYT-T)/BGA

Intel Atom Bay Trail Z3775 (BGA)

Video card:

Intel HD Graphics (Atom Processor Z36xxx/Z37xxx Series Graphics & Display)




eMMC 32 GB (/dev/mmcblk0)
flash disk 7.5GB (/dev/sda, hidden, Windows recovery)

eMMC 64GB (/dev/mmcblk0)


LPDDR3 1067 2GB (on-board)

Wireless card:

Broadcom 43241b4 SDIO


Broadcom (on-board BCM2035 HCI?)

Overall Status in Debian 10 "Buster"

Core Components


Boot Standard Kernel:


Detect hard drives:



(./) <!>

Power Management







Sleep / Suspend


Battery monitor


Screen backlight

(./) <!>

Display Server



- OpenGL


- Resize and Rotate (randr)

(./) {i}



- Resize and Rotate (randr)


Built-in/Internal Devices

Keyboard's Hotkeys







(./) {i} X-(


{o} X-(


(./) X-(

MicroSD card reader


Built-in camera


Light sensor




Magnetomiter (??)






Configuration required


Affected by bugs


Requires non-free driver and or firmware


Error (Couldn't get it working)


Not tested or partially tested


Unsupported (no driver)


Not applicable

Important Notes

The information and procedures contained in this page are mostly for the T100TA model, they might not apply for other models. See also Asus X205TA as it has a similar hardware.

Unresolved hardware bugs as of June 2019

Unfortunately the hardware of this machine is not yet fully supported, this is the list of the major issues still unresolved:

Because of these issues, it might be useful to later install newer kernels and firmwares (if any) from the Debian backports repositories.

Things to know before installing Debian

  • The T100 is a mixed mode EFI system (i.e. a 64-bit CPU combined with a 32-bit EFI) already supported by the Debian Installer, therefore Debian can be installed in the 32-bit or in the 64-bit version;
  • The WiFi card is difficult to configure from the Debian Installer environment, it is recommended to use a standard CD/DVD Debian Installer image (or use a supported WiFI USB dongle if the internet is really required during the installation);

  • Debian Buster supports Secure Boot, please check the Debian wiki page here and evaluate if disabling it or not;

  • If dual-booting with Windows, it is recommended to disable the Windows fast boot feature, see askubuntu - Why disable Fast Boot on Windows 8 when having dual booting?;

  • Because of the bugs mentioned above, it might be necessary to apply the fix described in the Power Management section already when launching the Debian Installer;

  • After the installation, if experiencing weird issues at boot (e.g. freezing when loading the initial ramdisk or screen offset), try to boot with the keyboard/dock detached.


Power Management

Intel Bay Trail CPU C-states issue

Devices with Intel Bay Trail CPUs are affected by this bug which causes seemingly random crashes and has not been resolved so far. The only work around which has been reported to work consistently is setting the intel_idle.max_cstate=1 kernel parameter which has the drawback of increasing power consumption considerably.

/!\ During installation and until you have configured Grub as described below, you need to manually apply this parameter at each boot! Both in Grub and before launching the Debian installer, you can do this by pressing e after selecting the entry you want to boot and then adding the parameter at the end of the "linux..." line.

To set this parameter, edit the file /etc/default/grub and add the parameter at the GRUB_CMDLINE_LINUX line like this (if there already are other parameters there, leave them and just add yours at the end separated by a space):


then update grub with:

# update-grub

Screen backlight control

The screen backlight cannot be controlled (see the list of bugs in the Important Notes section) and it is locked at the maximum brightness level.

As a (partial) workaround, brightness can be changed with xrandr (provided by x11-xserver-utils) but without reducing power consumption:

$ man xrandr
--brightness brightness
    Multiply the gamma values on the crtc currently attached to the output to specified floating value.
    Useful for overly bright or overly dim outputs. However, this is a software only modification, if 
    your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.

The syntax is:

xrandr --output <OUTPUT> --brightness <VALUE>

where <OUTPUT> can be found with the command xrandr | grep -w connected | cut -d" " -f1, and <VALUE> can be a value between 0 and 1.


Intel HD Graphics, Atom Processor Z36xxx/Z37xxx Series Graphics & Display. It does not require the driver provided by xserver-xorg-video-intel, this package can be uninstalled.

The touchscreen is identified as ATML1000:

$ xinput
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Asus TouchPad                             id=11   [slave  pointer  (2)]
⎜   ↳ ATML1000:00 03EB:8C0E                     id=13   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Asus Wireless Radio Control               id=6    [slave  keyboard (3)]
    ↳ Video Bus                                 id=7    [slave  keyboard (3)]
    ↳ Sleep Button                              id=8    [slave  keyboard (3)]
    ↳ Asus Keyboard                             id=9    [slave  keyboard (3)]
    ↳ Asus Keyboard                             id=10   [slave  keyboard (3)]
    ↳ bytcr-rt5640 Headset                      id=12   [slave  keyboard (3)]
    ↳ Asus WMI hotkeys                          id=14   [slave  keyboard (3)]
    ↳ gpio-keys                                 id=15   [slave  keyboard (3)]

Screen rotation

On-board accelerometers are supported and the screen can be automatically rotated by adding the script t100ta_screen_rotation_auto to the startup applications. For a manual rotation of the screen, without using the accelerometers and only when requested by the user, the script t100ta_screen_rotation_manual can be used instead.

Right mouse button emulation

Right mouse button click via touchscreen has to be emulated. Two solutions are currently working:

  • using the virtual keyboard onboard, that has a dedicated button for it;

  • mapping the action to the physical Windows button of the tablet.

About the latter, the Windows button is the small physical button on the left side of the tablet (the bigger button right above is the volume button but it is not recognized by the system). Such button can be mapped to a command that emulates a right mouse button click. One way to do so is by using xdotool and xbindkeys (this should work only with X11, not with Wayland):

  1. Install xdotool and xbindkeys
  2. Create an initial configuration for xbindkeys with xbindkeys --defaults > ~/.xbindkeysrc

  3. Add the action to be mapped to the physical button
     cat << EOF >> ~/.xbindkeysrc
     # Emulate the right mouse button click with the physical Windows button.
     "xdotool click 3"
       m:0x0 + c:248
  4. Reload the xbindkeys configuration file or restart you session.

The physical Windows button is represented by the code m:0x0 + c:248, check that it is correct by issuing xbindkeys -k and then pressing it.


The audio device is an Intel SST Audio / Realtek RT5640, it requires the proprietary firmware firmware-intel-sound and an ALSA Use Case Manager (UCM) file that is provided by the package libasound2-data. Installing these two packages and restarting the machine should be enough to have the audio device working.

Possibility of permanent damage of the speakers

There were reports in the past of speakers getting destroyed when experimenting with the ALSA UCM files and setting the volume too high. Such problem should not currently occur but be careful.


The wifi device is an on-board SDIO device Broadcom 43241b1, it requires the proprietary firmware firmware-brcm80211 and a nvram file.

The nvram file can be found under /sys/firmware/efi/efivars/. If the directory is empty it may need to be (temporarily) mounted first by:

# mount -t efivarfs efivarfs /sys/firmware/efi/efivars

Then the nvram-file needs to be copied and renamed:

# cp /sys/firmware/efi/efivars/nvram-74b00bd9-805a-4d61-b51f-43268123d113 /lib/firmware/brcm/brcmfmac43241b4-sdio.txt

If this does not work on T100TAL, try:

# cp /sys/firmware/efi/efivars/nvram-74b00bd9-805a-4d61-b51f-43268123d113 /lib/firmware/brcm/brcm/brcmfmac43340-sdio.txt

In general, you can determine the name of the target file looking at the output in the /tmp/var/syslog after you restart the brcmfmac module:

brcmfmac_sdio mmc1:0001:1: firmware: failed to load brcm/brcmfmac43340-sdio.bin (-2) 

Note that brcmfmac43241b4-sdio.txt (and other) contains a wrong MAC address. However this is not a problem and does not need to be changed as the file is only a template.

After that reboot the system or reload the brcmfmac module:

# modprobe -r brcmfmac && modprobe brcmfmac

WiFi instabilities

The wifi device might disconnect sometimes without being able to reconnect again. If such issue occurs, the only way to make it work again is to reload its kernel module:

# modprobe -r brcmfmac && modprobe brcmfmac

Built-in camera

The camera should be a mt9m114 camera device, it is currently not supported.

System Summary


00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [8086:0f35] (rev 09)
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 09)
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 09)


Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0b05:17e0 ASUSTek Computer, Inc. 
Bus 001 Device 002: ID 0b05:17e4 ASUSTek Computer, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Some configuration files and sample outputs.

  • [get | view] (2019-06-23 21:05:34, 42.7 KB) [[attachment:photo.jpg]]
 All files | Selected Files: delete move to page copy to page

A lot of useful information, that have been then tested and adapted for Debian, were provided in the past in the now defunct G+ group ASUS T100 Ubuntu.