Translation(s): none

DebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owners would know how get the best out of that hardware.

The purpose is not to duplicate the Debian Official Documentation, but to document how to install Debian on some specific hardware.

If you need help to get Debian running on your hardware, please have a look at our user support channels where you may find specific channels (mailing list, IRC channel) dedicated to certain types of hardware.

Models covered
ASUS Vivobook E200HA

Unfortunately Intel doesn't support Linux on Cherry Trail Atom SOCs, so this laptop has problems with audio (no sound with the integrated sound card, but works with an external one or via HDMI) and video (no suspension, but you can configure a "pseudo-suspension" that consumes little power, as explained below).

Most problems can be remediated, but if you're looking to a buy machine like this you should purchase one with a Celeron (or supported AMD equivalent) instead.

Overall Status

Core Components


Boot Standard Kernel:


LAN network card:


Detect CD/DVD:


Detect hard drives:


Extra Features

CPU Frequency Scaling




Sleep / Suspend

{X} Does not have ACPI S3



- OpenGL


- Resize-and-Rotate(randr)


Switch to External Screen



- Built-in (Trackpoint)


- Built-in (Touchpad)






Keyboard's Hotkeys


Legend :
{OK} = OK ; {X} Unsupported(No Driver) ; /!\ = Error (Couldn't get it working); [?] Unknown, Not Test ; [-] Not-applicable
{i} = Configuration Required; X-( = Only works with a non-free driver and or firmware

Important Note

You may need to disable Secure Boot on UEFI/BIOS. To enter in BIOS press and release F2.

Debian stretch (or newer) is needed. It is recommended to use unofficial non-free images including firmware.



This shouldn't be necessary, but if your keyboard layout isn't correctly loaded run setxkbmap pt (adapt to your keyboard layout) and add it to ~/.profile to execute it at every login.


Install Debian with discard and noatime options for every partition, as E200HA's storage is eMMC flash memory. This will help prolonging its lifespan.

If you miss this during installation, you can do it later by editing /etc/fstab and adding discard,noatime every fourth column.

E.g. for the root partition right before errors=remount-ro 0, so that it looks like discard,noatime,errors=remount-ro 0.


If you used unofficial non-free images including firmware, the WiFi should work.

If not, download the package firmware-atheros (version 20160824-1 or newer) in another machine and install it via dpkg, as this is the only means of networking of this laptop. The WiFi card is a Qualcomm Atheros QCA9377.

You need to address this before installing any packages, such as those mentioned in the sections below.


To control the display brightness you can install the package xbacklight and adjust it like xbacklight -set 50. The brightness should be memorized, if not add it to ~/.profile to execute it at every login.

If running this command fails with No outputs have backlight property, edit /etc/X11/xorg.conf and add this:

Section "Device"
    Identifier  "Card0"
    Driver      "intel"
    Option      "Backlight"  "intel_backlight"

Power Management

Not working, see Bug#833009.

Unfortunately suspend doesn't work on Linux on Cherry Trail.

You can disable accidental suspend commands via:

sudo systemctl mask

You can also make it not attempt to suspend when closing the lid by adding this to /etc/systemd/logind.conf:


This will consume very little power when you close the lid (and it should lock the screen).

More details:

If you get Gave up waiting for suspend/resume device during boot, add noresume to your kernel boot parameters in /etc/default/grub (don't forget to update-grub), so that it looks like:



Unfortunately audio doesn't (currently) work on Linux on Cherry Trail. It might work in the future. However, you can use an external USB sound card. Also audio via HDMI supposedly works.


The touchpad should work.

MicroSD Card Reader

The MicroSD card reader doesn't work (reliably).

Kernels 4.7.1 and 4.7.2 sometimes work, but sometimes they freeze. Kernels 4.7.3-4.7.10 freeze when inserting a card. Kernels 4.8 and 4.9 don't detect them and kernel 4.6.7 doesn't seem to work either.

Note: this was actually tested with Ubuntu prebuilt kernels on a Xubuntu 16.04 system.


It is recommended to install packages such as tlp and thermald, to help saving battery power.

You can compress the RAM to help save a little using zram-config (not avaliable in Debian, but the Ubuntu package works). Download zram-config_0.5_all.deb from Ubuntu and install it via sudo dpkg -i zram-config_0.5_all.deb.

System Summary


00:00.0 Host bridge [0600]: Intel Corporation Braswell SoC Transaction Router [8086:2280] (rev 22)
00:02.0 VGA compatible controller [0300]: Intel Corporation Braswell PCI Configuration Registers [8086:22b0] (rev 22)
00:0b.0 Signal processing controller [1180]: Intel Corporation Braswell P-Unit Power Management [8086:22dc] (rev 22)
00:14.0 USB controller [0c03]: Intel Corporation Braswell USB xHCI Host Controller [8086:22b5] (rev 22)
00:1a.0 Encryption controller [1080]: Intel Corporation Braswell Trusted Execution Engine Interface [8086:2298] (rev 22)
00:1c.0 PCI bridge [0604]: Intel Corporation Braswell PCIe Port 1 [8086:22c8] (rev 22)
00:1f.0 ISA bridge [0601]: Intel Corporation Braswell Platform Controller Unit LPC [8086:229c] (rev 22)
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)


lsusb -v | grep -E '\<(Bus|iProduct|bDeviceClass|bDeviceProtocol)' 2>/dev/null

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         3 
  iProduct                2 xHCI Host Controller
Bus 001 Device 004: ID 046d:c001 Logitech, Inc. N48/M-BB48/M-UK96A [FirstMouse Plus]
  bDeviceClass            0 (Defined at Interface level)
  bDeviceProtocol         0 
  iProduct                2 USB Mouse
      (Bus Powered)
  (Bus Powered)
Bus 001 Device 003: ID 13d3:3496 IMC Networks 
  bDeviceClass          224 Wireless
  bDeviceProtocol         1 Bluetooth
  iProduct                0 
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp. 
  bDeviceClass          239 Miscellaneous Device
  bDeviceProtocol         1 Interface Association
  iProduct                1 USB2.0 VGA UVC WebCam
      (Bus Powered)
  bDeviceClass          239 Miscellaneous Device
  bDeviceProtocol         1 Interface Association
  (Bus Powered)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  bDeviceClass            9 Hub
  bDeviceProtocol         1 Single TT
  iProduct                2 xHCI Host Controller

USB Host controllers entries (without OHCI, UHCI, EHCI) are removed too.



Some configuration files and sample outputs.