= Progress call: 17:00 UTC =

	* Update on UEFI images (sunil)
		* arm64 and armhf
		* Tested and working on several boards
		* Issues:
			* Raspberry Pi 4 has not booted successfully yet
			* Raspberry Pi 3B+ u-boot image not readily available
			* Partition expansion script does not work for GPT partition tables
		* Document how to use in each supported board's page
		* Also a generic page for UEFI
		* Plan to move RPi 3B+, Pine64, and !OLinuXino A64 to UEFI image
		* How it works
			* Gap between partition table and first partition
			* Put ARM Trusted Firmware and u-boot as one blob
			* Looks at first boot partition (ext2)
			* Reads uboot.scr script which loads kernel, initrd, dtb
			* DTB, uboot script prepared by flash-kernel
			* UEFI requires special EFI partition
			* /boot/efi stores EFI binaries
			* Normally BIOS lets you decide which EFI binary to boot
			* Grub provides an EFI binary
			* For ARM, u-boot replaces BIOS, loads UEFI binary
			* Already used on ARM servers
			* UEFI partition will contain grub, loaded by firmware
			* Bootloader ROM core different on each board, boots from different address
			* Place generic u-boot at appropriate location
			* u-boot looks for UEFI disks everywhere, loads application if it finds one
			* UEFI should provide all information about hardware
			* u-boot needs DTB file for this
			* Keep UEFI partition and root partition together
			* Works best if the board has SPI flash to hold u-boot, then no SD card is needed.
			* Any binary blobs in SPI flash or on SD card, not included in image.
	* Update on Lime2 Rev. K (sunil)
		* Successfully booted armhf UEFI image
		* TODO: Custom u-boot stored in SPI flash
		* Tested with boot from SD card and SATA hard drive
		* Solution to ship newer board revision for pioneer kit
		* Also needs fix to partition expansion
		* Need to test stable kernel, or use backports kernel
	* First boot opt-out of frequent feature updates (backports) (James)
		* https://salsa.debian.org/freedombox-team/freedombox/-/merge_requests/1870
	* radicale 1.x handling (James)
		* https://salsa.debian.org/freedombox-team/freedombox/-/merge_requests/1874
	* freedombox 20.13 in NEW queue (James)
		* Skip uploading new release for now.
		* Will still update translation files, fetch and build new manual.
	* "container destroy" can fail and requires reboot to fix.
		* https://salsa.debian.org/freedombox-team/freedombox/-/issues/1910
	* manual on wiki