Differences between revisions 8 and 9
⇤ ← Revision 8 as of 2019-02-26 23:26:49 →
Size: 1093
Editor: JamesValleroy
Comment: remove content from manual
← Revision 9 as of 2020-05-23 19:56:15 → ⇥
Size: 1140
Editor: JamesValleroy
Comment: add TableOfContents
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:

<<TableOfContents()>>

## BEGIN_INCLUDE

Contents

  1. SIP Server (repro)
    1. How to set up the SIP server
    2. Port Forwarding

SIP Server (repro)

App removed

repro has been removed from Debian 10 (Buster), and therefore is no longer available in FreedomBox.

repro is a server for SIP, a standard that enables Voice-over-IP calls. A desktop or mobile SIP client is required to use repro.

How to set up the SIP server

  1. Configure the domain at /repro/domains.html on the FreedomBox.

    • Repro Domains

  2. Add users at /repro/addUser.html.

    • Repro Users

  3. Disable and re-enable the repro application in Plinth.

Port Forwarding

If your FreedomBox is behind a router, you will need to set up port forwarding on your router. You should forward the following ports for repro:

  • TCP 5060
  • TCP 5061
  • UDP 5060
  • UDP 5061

Back to Features introduction or manual pages.

Intro

Information

Support

Contribute

Reports

Promote

Vision

Hardware

Live Help

Where To Start

Translate

Calls

Talks

Overview

Download

Q&A

To Do

Design

Releases

Press

Features

Manual

Contributors

Code

Blog

FreedomBox for Communities

FreedomBox Developer Manual

HELP & DISCUSSIONS: Discussion Forum - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project

Next call: Sunday, September 24 at 17:00 UTC

This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

CategoryFreedomBox