Wiki

• FrontPage
• RecentChanges
• FindPage
• HelpContents
• pcDuino3

pcDuino3

LinkSprite pcDuino3S is a single board computer running on Allwinner A20 and sold with a good case. FreedomBox images are built and tested for this device.

Note: The FreedomBox logo is simply a sticker on top of device brought from store.

Important: Read general advice about hardware before building a FreedomBox with this single board computer.

Similar Hardware

Although untested, the following similar hardware is also likely to work well with FreedomBox.

• https://www.linksprite.com/linksprite-pcduino3/ also covers pcDuino3B

Download

FreedomBox disk images for this hardware are available. Follow the instructions on the download page to create a FreedomBox SD card, USB disk, SSD or hard drive and boot into FreedomBox. Pick the image meant for pcduino3.

An alternative to downloading these images is to install Debian on the APU and then install FreedomBox on it.

Availability

• Price: 89 USD

• LinkSprite

• Full list of suppliers

Hardware

• Open Hardware: No

• CPU: AllWinner A20 SoC, 1GHz ARM Cortex A7 Dual Core

• RAM: 1 GB
• Storage: SD card, 4 GB onboard flash
• Architecture: armhf
• Ethernet: 10/100 Mbps

• WiFi: Built-in WiFi requires non-free firmware, use a USB WiFi device instead

• SATA: 1 SATA host socket

Non-Free Status

• Non-free blobs required: No

• WiFi: Requires non-free firmware

• Boot Firmware: BROM (GPLV2+)

CategoryFreedomBox