RockPro64

RockPro64

Pine64's RockPro64 is a powerful single board computer. It uses the Rockchip RK3399 Hexa Core ARM64 processor. FreedomBox images are built and tested for this device.

Important: Read general advice about hardware before building a FreedomBox with this single board computer.

Download

Before downloading and using FreedomBox you need to ensure that latest u-boot based firmware is installed into the SPI flash chip. See instructions on how to write u-boot firmware into SPI flash. The gist is that you download and write an image to an SD card. Boot with SD card and wait for white LED blinking to stop. After that power off, remove the SD card and proceed with FreedomBox download.

FreedomBox images meant for all "arm64" hardware work well for this device. However, u-boot firmware must be present in SPI flash (or on a separate SD card, which is not explained here). Follow the instructions on the download page to create a FreedomBox SD card and boot the device. These images also work well for onboard eMMC, USB 2.0 and USB 3.0 disk drives. The process for preparing USB disk drives is same as for an SD card. For eMMC, boot the board using any OS and then write the image to the eMMC similar to writing to SD card.

An alternative to downloading these images is to install Debian on the device and then install FreedomBox on it.

Availability

Hardware

Non-Free Status

Known Issues


Intro

Information

Support

Contribute

Reports

Promote

Vision

Hardware

Live Help

Where To Start

Translate

Calls

Talks

Overview

Download

Q&A

To Do

Design

Releases

Press

Features

Manual

Contributors

Code

Blog

FreedomBox for Communities

FreedomBox Developer Manual

HELP & DISCUSSIONS: Discussion Forum - Matrix - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project

Next call: Saturday, April 13 at 14:00 UTC

This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.


CategoryFreedomBox