Raspberry Pi 3 Model B+
Raspberry Pi 3 Model B+ is a popular single board computer developed with the intention of promoting teaching of basic computer science in schools. It is a successor to Raspberry Pi 3 Model B with better Ethernet and a 5Ghz Wi-Fi. FreedomBox "stable" and "testing" images are available for Raspberry Pi 3 Model B+.
Please do not expect any output on a monitor connected via HDMI to this device as it does not display anything beyond the message 'Starting kernel...'. See the Quick Start page to access and control your FreedomBox from network.
Important: Read general advice about hardware before building a FreedomBox with this single board computer.
Download
Raspberry Pi recommends creating a bootable SD card with the Raspberry Pi Imager (rpi-imager), their official cross-platform utility that downloads an image and writes it to removable media. FreedomBox "stable" and "testing" images can be selected in rpi-imager under the "Other specific-purpose OS" category.
FreedomBox SD card images for this hardware are also available online. Download the "stable" or "testing" image for Raspberry Pi 3 Model B+. Follow the instructions on the download page to create a FreedomBox SD card and boot into FreedomBox.
Availability
- Price: 35 USD
Hardware
- Open Hardware: No
- CPU: 1.4GHz 64-bit quad-core ARMv8 CPU
- RAM: 1 GB
- Storage: MicroSD card slot
- Architecture: armhf
- Ethernet: 10/100/1000, RJ45
WiFi: 802.11ac but requires non-free firmware, instead use a USB WiFi device
- SATA: None
Non-Free Status
- Non-free blobs required: boot firmware
WiFi: Requires non-free firmware
Intro |
Information |
Support |
Contribute |
Reports |
Promote |
|
|
|
|||||
|
|
|
||||
HELP & DISCUSSIONS: Discussion Forum - Matrix - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project
Next call: Sunday, January 26 at 17:00 UTC
This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.