Orange Pi Zero
[Orange Pi Zero](http://www.orangepi.org/orangepizero/) is a single board computer available at very low price. It uses the ?AllWinner H2 SoC, and has 256MB/512MB DDR3 SDRAM. It doesn't require any non-free firmware to run FreedomBox. However, the onboard Wi-Fi module needs proprietary firmware to work. The board is available in two versions: with 256MB RAM and 512MB RAM. The version with 512 MB RAM is recommended for FreedomBox. Even then, FreedomBox is expected to gracefully run only a small number of services. To use this device as a FreedomBox, a separate USB WiFi device that does not require non-free firmware is recommended.
Recommendation: If you are using a board that uses SD cards, when you flash the FreedomBox image onto your SD card, we recommend that you use an SD card with at least 8GB of storage space.
Download
FreedomBox SD card images are available for this device. Follow the instructions on the download page to create a FreedomBox SD card and boot the device.
Build Image
FreedomBox images for this hardware can be built using Freedom Maker.
Availability
Hardware
- CPU: ARM Cortex-A7 Quad-Core (Allwinner H2)
- RAM: 256MB/512MB DDR3 SDRAM
- Storage: Up to 32GB on uSD slot, 2MB SPI Flash
- Architecture: armhf
- Ethernet: 10/100, RJ45
WiFi: Onboard 802.11 b/g/n, use a USB WiFi device
Non-Free Status
- Non-free blobs required: No (without Wi-Fi)
WiFi: no free WiFi drivers + firmware available
- Works with stock Debian kernel: Yes
Known Issues
None
Intro |
Information |
Support |
Contribute |
Reports |
Promote |
|
|
|
|||||
|
|
|
HELP & DISCUSSIONS: Discussion Forum - Matrix - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project
Next call: Saturday, April 13 at 14:00 UTC
This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.
Orange Pi Zero image is licensed under a Creative Commons Attribution 3.0 Unported License by Linux Sunxi.