Differences between revisions 1 and 2
Revision 1 as of 2019-04-26 09:56:55
Size: 18
Comment: Created stub
Revision 2 as of 2019-04-26 10:19:01
Size: 1557
Comment: Add initial draft for Banana Pro
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:

{{attachment:banana-pro.jpg|Pine 64+|width=640}}

[[http://www.lemaker.org|LeMaker]] Banana Pro is an updated version of its predecessor Banana Pi.

'''Recommendation:''' This board does not have built-in storage. If installing to a microSD card, it is recommended to choose a microSD card of class 10 or better with at least 8 GB of storage.

=== Download ===

!FreedomBox SD card [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card and boot into !FreedomBox. Pick the image meant for Banana Pro.

An alternative to downloading these images is to [[InstallingDebianOn/Allwinner|install Debian]] on the device and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it.

=== Build Image ===

!FreedomBox images for this hardware can be built using [[https://wiki.debian.org/FreedomBox/Maker|freedom-maker]].

=== Hardware ===

 * Open Source Hardware (OSHW): No
 * CPU: Allwinner A20, Dual-core ARM Cortex A7 processor
 * RAM: 3 variants - 1 GB
 * Storage: SD card
 * Architecture: armhf
 * Ethernet: 10/100/1000 Mbps
 * Battery: No
 * !WiFi: WiFi 802.11 b/g/n 2.4GHz (not tested with !FreedomBox)
 * SATA: SATA 2.0 (2.5 inch SSD or HDD recommended)

=== Non-Free Status ===

 * Non-free blobs required: No
 * !WiFi: Not available
 * Works with stock Debian kernel: Yes

=== Known Issues ===

None

## END_INCLUDE

<<Include(FreedomBox/Portal)>>

----
CategoryFreedomBox

Banana Pro

Pine 64+

LeMaker Banana Pro is an updated version of its predecessor Banana Pi.

Recommendation: This board does not have built-in storage. If installing to a microSD card, it is recommended to choose a microSD card of class 10 or better with at least 8 GB of storage.

1. Download

FreedomBox SD card images for this hardware are available. Follow the instructions on the download page to create a FreedomBox SD card and boot into FreedomBox. Pick the image meant for Banana Pro.

An alternative to downloading these images is to install Debian on the device and then install FreedomBox on it.

2. Build Image

FreedomBox images for this hardware can be built using freedom-maker.

3. Hardware

  • Open Source Hardware (OSHW): No
  • CPU: Allwinner A20, Dual-core ARM Cortex A7 processor
  • RAM: 3 variants - 1 GB
  • Storage: SD card
  • Architecture: armhf
  • Ethernet: 10/100/1000 Mbps
  • Battery: No
  • WiFi: WiFi 802.11 b/g/n 2.4GHz (not tested with FreedomBox)

  • SATA: SATA 2.0 (2.5 inch SSD or HDD recommended)

4. Non-Free Status

  • Non-free blobs required: No
  • WiFi: Not available

  • Works with stock Debian kernel: Yes

5. Known Issues

None


Information

Support

Contribute

Reports

Promote

Overview

Hardware

Live Help

Where To Start

Translate

Calls

Talks

Features

Vision

Q&A

Design

To Do

Releases

Press

Download

Manual

Code

Contributors

Blog

FreedomBox for Communities

FreedomBox Developer Manual

HELP & DISCUSSIONS: Discussion Forum - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project

Next call: Sunday, August 23rd at 17:00 UTC

Latest news: Help translate freedombox.org - 2020-08-01

This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.


CategoryFreedomBox