APU
PC Engines APU 1D is a single board computer with 3 Gigabit ethernet ports, a powerful AMD APU and Coreboot firmware. FreedomBox images built for AMD64 machines are tested to work well for it.
Important: Read general advice about hardware before building a FreedomBox with this single board computer.
Similar Hardware
Although untested, the following similar hardware is also likely to work well with FreedomBox.
- Using amd64 image:
- Using i386 image:
Download
FreedomBox disk images for this hardware are available. Follow the instructions on the download page to create a FreedomBox SD card, USB disk, SSD or hard drive and boot into FreedomBox. Pick the image meant for all amd64 machines.
An alternative to downloading these images is to install Debian on the APU and then install FreedomBox on it.
Networking
The first network port, the left most one in the above picture, is configured by FreedomBox to be an upstream Internet link and the remaining 2 ports are configured for local computers to connect to.
Availability
- Price: 110 - 170 USD (depending on the board and supplier)
Hardware
- Open Hardware: No
CPU: AMD G series T40E
- RAM: 2 GB DDR3-1066 DRAM
- Storage: SD card, External USB
- Architecture: amd64
- Ethernet: 3 Gigabit Ethernet ports
WiFi: None, use a USB WiFi device
- SATA: 1 m-SATA and 1 SATA
Non-Free Status
- Non-free blobs required: No
WiFi: Not available
Boot firmware: Coreboot
Intro |
Information |
Support |
Contribute |
Reports |
Promote |
|
|
|
|||||
|
|
|
||||
HELP & DISCUSSIONS: Discussion Forum - Matrix - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project
Next call: Saturday, December 14 at 14:00 UTC
This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.