Differences between revisions 8 and 9
Revision 8 as of 2019-03-05 22:59:59
Size: 3118
Comment: fix wifi link
Revision 9 as of 2019-04-24 02:08:28
Size: 4126
Comment: Update known issues for Rev. C and Rev. G2
Deletions are marked like this. Additions are marked like this.
Line 51: Line 51:
 * Order hardware revision G2, because the current revision K is [[https://salsa.debian.org/freedombox-team/freedom-maker/issues/148|not working properly]].  * Revision C hardware has poor performance when receiving Ethernet data in Gigabit mode. To workaround the problem, you can switch to 100 Mbps mode instead of Gigabit mode. Login to your !FreedomBox as root (or plugin the SD card into another computer) and create the file /etc/NetworkManager/dispatcher.d/20-fix-ethernet-problem with the following contents:
 {{{
#!/bin/bash

set -e # Exit with code on error

IFACE="$1"
ACTION="$2"

if [[ "$IFACE" != "eth0" ]]; then
    exit 0
fi

case ${ACTION} in
    up)
        logger "Setting up $IFCAE in 100Mbps mode"
        mii-tool eth0 -A 100BaseTx-FD
        ;;
    *)
        ;;
esac
}}}
 * Revision G2 hardware has poor performance when transmitting Ethernet data in Gigabit mode. Download and use the [[https://ftp.freedombox.org/pub/freedombox/pioneer/|Pioneer Edition image]] to fix the issue. It contains a slightly [[https://salsa.debian.org/freedombox-team/u-boot|modified u-boot]]. The above workaround to put the Ethernet into 100 Mbps mode also fixes this issue.
 * Revision K hardware is [[https://salsa.debian.org/freedombox-team/freedom-maker/issues/148|not working properly]].

A20 OLinuXino Lime2

A20 OLinuXino Lime2

Olimex's A20 OLinuXino Lime2 is a fully Open Source Hardware (OSHW) single board computer. This means that the designer is actively helping people using the platform for their own designs, and supports them in adding hardware functionality and production advice. This is a part of freedom that is often overlooked, but very much aligned with the FreedomBox goals. It uses the Allwinner A20 Dual Core ARM processor. FreedomBox images are built and tested for this device starting with version 0.7. To use this device as a FreedomBox, a separate USB WiFi device that does not require non-free firmware is recommended.

Recommendation: If you are using a board that uses SD cards, when you flash the FreedomBox image onto your SD card, we recommend that you use an SD card with at least 8GB of storage space.

Similar Hardware

The following similar hardware will also work well with FreedomBox.

Download

FreedomBox SD card images are available for this device. Follow the instructions on the download page to create a FreedomBox SD card and boot the device. These SD card images are meant for use with the on-board SD card slot and won't work when used with a separate SD card reader connected via USB.

An alternative to downloading these images is to install Debian on the device and then install FreedomBox on it.

Build Image

FreedomBox images for this hardware can be built using Freedom Maker.

Availability

  • Price: 45 EUR (A20 OLinuXino Lime2)
  • Price: 55 EUR (A20 OLinuXino Lime2 4GB)
  • Olimex Store

Hardware

  • Open Source Hardware (OSHW): Yes

  • CPU: Allwinner A20, ARM Cortex-A7 @ 1GHz dual-core
  • RAM: 1 GiB DDR3
  • Storage: 4 GB NAND flash built-in (only on 4GB model), 1x microSD slot
  • Architecture: armhf
  • Ethernet: 10/100/1000, RJ45
  • WiFi: None, use a USB WiFi device

  • SATA: 1x port

Non-Free Status

  • Non-free blobs required: No
  • WiFi: Not available

  • Works with stock Debian kernel: Yes
  • Boot Firmware: BROM (GPLV2+)

Known Issues

  • Revision C hardware has poor performance when receiving Ethernet data in Gigabit mode. To workaround the problem, you can switch to 100 Mbps mode instead of Gigabit mode. Login to your FreedomBox as root (or plugin the SD card into another computer) and create the file /etc/NetworkManager/dispatcher.d/20-fix-ethernet-problem with the following contents:

    set -e  # Exit with code on error
    
    IFACE="$1"
    ACTION="$2"
    
    if [[ "$IFACE" != "eth0" ]]; then
        exit 0
    fi
    
    case ${ACTION} in
        up)
            logger "Setting up $IFCAE in 100Mbps mode"
            mii-tool eth0 -A 100BaseTx-FD
            ;;
        *)
            ;;
    esac
  • Revision G2 hardware has poor performance when transmitting Ethernet data in Gigabit mode. Download and use the Pioneer Edition image to fix the issue. It contains a slightly modified u-boot. The above workaround to put the Ethernet into 100 Mbps mode also fixes this issue.

  • Revision K hardware is not working properly.


Information

Support

Contribute

Reports

Promote

Overview

Hardware

Live Help

Where To Start

Translate

Calls

Talks

Features

Vision

Q&A

Design

To Do

Releases

Press

Download

Manual

Code

Contributors

Blog

HELP & DISCUSSIONS: Discussion Forum - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project

Next call: Sunday, September 22nd at 17:00 UTC

Latest news: Announcing Pioneer FreedomBox Kits - 2019-03-26

This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.


CategoryFreedomBox