Differences between revisions 1 and 6 (spanning 5 versions)
Revision 1 as of 2015-11-19 18:41:59
Size: 2417
Comment: Add page for A20 OLinuXino Lime2
Revision 6 as of 2019-01-26 10:59:44
Size: 3085
Editor: ?RobertPollak
Comment: Add an order suggestion.
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
Olimex's [[https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2/open-source-hardware|A20 OLinuXino Lime2]] is fully open source hardware single board computer using the Allwinner A20 Dual Core ARM processor. !FreedomBox images are being built for it starting with version 0.7. For using this board as !FreedomBox, a separate [[FreedomBox/Hardware/USBWiFi|USB WiFi device]] that does not require non-free firmware is recommended. Olimex's [[https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2/open-source-hardware|A20 OLinuXino Lime2]] is a fully Open Source Hardware (OSHW) single board computer. This means that the designer is actively helping people using the platform for their own designs, and supports them in adding hardware functionality and production advice. This is a part of freedom that is often overlooked, but very much aligned with the !FreedomBox goals. It uses the Allwinner A20 Dual Core ARM processor. !FreedomBox images are built and tested for this device starting with version 0.7. To use this device as a !FreedomBox, a separate USB WiFi device that does not require non-free firmware is recommended.

'''Recommendation:''' If you are using a board that uses SD cards, when you flash the FreedomBox image onto your SD card, we recommend that you use an SD card with at least 8GB of storage space.
Line 15: Line 17:
!FreedomBox SD card [[FreedomBox/Download|images]] for this hardware are being built. These SD card images are meant for use with the on-board SD card slot and won't work when used with a separate SD card reader connected via USB. !FreedomBox SD card [[FreedomBox/Download|images]] are available for this device. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card and boot the device. These SD card images are meant for use with the on-board SD card slot and won't work when used with a separate SD card reader connected via USB.
Line 21: Line 23:

!FreedomBox images for this hardware can be built using [[FreedomBox/Maker|Freedom Maker]] once the support for it is added.
!FreedomBox images for this hardware can be built using [[FreedomBox/Maker|Freedom Maker]].
Line 32: Line 33:
 * Open Source Hardware (OSHW): Yes  * Open Source Hardware (OSHW): [[https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE|Yes]]
Line 50: Line 51:
 * !WiFi is not available. A separate [[FreedomBox/Hardware/USBWiFi|USB WiFi device]] is recommended.  * Order hardware revision G2, because the current revision K is [[https://salsa.debian.org/freedombox-team/freedom-maker/issues/148|not working properly]].

A20 OLinuXino Lime2

A20 OLinuXino Lime2

Olimex's A20 OLinuXino Lime2 is a fully Open Source Hardware (OSHW) single board computer. This means that the designer is actively helping people using the platform for their own designs, and supports them in adding hardware functionality and production advice. This is a part of freedom that is often overlooked, but very much aligned with the FreedomBox goals. It uses the Allwinner A20 Dual Core ARM processor. FreedomBox images are built and tested for this device starting with version 0.7. To use this device as a FreedomBox, a separate USB WiFi device that does not require non-free firmware is recommended.

Recommendation: If you are using a board that uses SD cards, when you flash the FreedomBox image onto your SD card, we recommend that you use an SD card with at least 8GB of storage space.

Similar Hardware

The following similar hardware will also work well with FreedomBox.

Download

FreedomBox SD card images are available for this device. Follow the instructions on the download page to create a FreedomBox SD card and boot the device. These SD card images are meant for use with the on-board SD card slot and won't work when used with a separate SD card reader connected via USB.

An alternative to downloading these images is to install Debian on the device and then install FreedomBox on it.

Build Image

FreedomBox images for this hardware can be built using Freedom Maker.

Availability

  • Price: 45 EUR (A20 OLinuXino Lime2)
  • Price: 55 EUR (A20 OLinuXino Lime2 4GB)
  • Olimex Store

Hardware

  • Open Source Hardware (OSHW): Yes

  • CPU: Allwinner A20, ARM Cortex-A7 @ 1GHz dual-core
  • RAM: 1 GiB DDR3
  • Storage: 4 GB NAND flash built-in (only on 4GB model), 1x microSD slot
  • Architecture: armhf
  • Ethernet: 10/100/1000, RJ45
  • WiFi: None, use a USB WiFi device

  • SATA: 1x port

Non-Free Status

  • Non-free blobs required: No
  • WiFi: Not available

  • Works with stock Debian kernel: Yes
  • Boot Firmware: BROM (GPLV2+)

Known Issues


Intro

Information

Support

Contribute

Reports

Promote

Vision

Hardware

Live Help

Where To Start

Translate

Calls

Talks

Overview

Download

Q&A

To Do

Design

Releases

Press

Features

Manual

Contributors

Code

Blog

FreedomBox for Communities

FreedomBox Developer Manual

HELP & DISCUSSIONS: Discussion Forum - Matrix - Mailing List - #freedombox irc.debian.org | CONTACT Foundation | JOIN Project

Next call: Saturday, April 13 at 14:00 UTC

This page is copyright its contributors and is licensed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.


CategoryFreedomBox