Differences between revisions 86 and 88 (spanning 2 versions)
Revision 86 as of 2022-01-19 10:50:39
Size: 6856
Comment: make translation header easy to include in translations
Revision 88 as of 2022-05-02 04:00:13
Size: 7127
Editor: PaulWise
Comment: mention isenkram/appstream
Deletions are marked like this. Additions are marked like this.
Line 53: Line 53:
=== Firmware after installation ===

The DebianPackage:isenkram and other tools can prompt to install the appropriate firmware and other hardware support packages when the hardware is plugged in. This mostly [[USB/GadgetSetup|relies]] on packages declaring via AppStream what hardware they support.
Line 67: Line 71:
=== List of firmware in Linux kernel === === List of firmware in Debian ===
Line 74: Line 78:
[[Firmware/List]] lists all firmware distributed along Debian Linux kernel images. [[Firmware/List]] lists firmware distributed by Debian.

Translation(s): English - Español - Français - Italiano


Firmware refers to embedded software which controls electronic devices. Well-defined boundaries between firmware and software do not exist, as both terms cover some of the same code. Typically, the term firmware deals with low-level operations in a device, without which the device would be completely non-functional (read more on Wikipedia).

Devices/Drivers Firmware

Many devices require firmware to operate. Historically, firmware would be built into the device's ROM or Flash memory, but more and more often, a firmware image has to be loaded into the device RAM by a device driver during device initialisation.

A few firmware images are Free Software and Open Source but almost all of them are non-free, which means that you need to add the non-free and contrib components to your APT sources.

Firmware during the installation

In some cases the installer detects the need for non-free firmware and prompts the user to make the firmware available to the installer to complete the installation. This can happen, for example, with wireless network cards which often require non-free firmware to function (see ipw2200 for an example).

Installation images with firmware

An easy method is to use an installer image that includes all non-free firmware packages directly. See https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/

Firmware on removable media

You can also download the firmware archive for your platform and unpack it into a directory named firmware in the root of a removable storage device (USB/CD drive). You can find firmware downloads for your Debian version at https://cdimage.debian.org/cdimage/unofficial/non-free/firmware/. When the installer starts, it will automatically find the firmware files in the directory on the removable storage and, if needed, install the required firmware.

In some cases, firmware supplied on removable media may not be detected automatically (e.g. 740503). In these situations, drop to the console (Ctrl+alt+F2) and manually mount(8) your removable storage on a temporary directory (e.g. /media).

Firmware on removable media and preseeding

It is also possible to bypass the installer's searching and installation process by preseeding and providing the firmware files directly to the kernel:

  • The needed firmware files are assumed to be in a directory named firmware on a FAT partition formatted with mkfs.vfat and labelled FIRMWARE.

  • The following addition is made to the installer's kernel command line. It is a single command but has been broken here for readability. Press TAB when the installation choice is highlighted to make the command line visible. A variation on this technique is presented elsewhere.

Installation+Archive+USBStick
preseed/early_command="modprobe vfat ; sleep 2 ;
mount /dev/disk/by-label/FIRMWARE /media ;
cp -a /media/firmware /lib"

Once the network is configured, Debian-Installer can fetch firmware from Debian repositories.

Firmware after installation

The isenkram and other tools can prompt to install the appropriate firmware and other hardware support packages when the hardware is plugged in. This mostly relies on packages declaring via AppStream what hardware they support.

Location of firmware files

Debian 8 "Jessie" and newer

udev used in Debian Jessie and later, only checks one directory for firmware files: /lib/firmware. See 729252 for details.

Debian 7 "Wheezy", Debian 6.0 "Squeeze"

Firmware is sourced from the following places (see udev's /lib/udev/hotplug.functions and /lib/udev/firmware.agent)

  1. /lib/firmware/$(uname -r) - Firmware provided by a package, specific for a kernel.

  2. /lib/firmware/ - Firmware provided by a package, valid for all kernels.

  3. /usr/local/lib/firmware - Location for manually installed firmware.

  4. /usr/lib/hotplug/firmware - Firmware provided by a package, valid for all kernels

List of firmware in Debian

To find which package provides a given firmware file, you can use this search page:
https://www.debian.org/distrib/packages#search_contents

Firmware/List lists firmware distributed by Debian.

Computer Firmware

EFI/UEFI

Found on most modern x86 PCs and servers, along with some ARM boards - (wikipedia)

BIOS

Found on older "IBM-PC" machines, generally most regular PCs and servers that were manufactured before 2011 - (wikipedia)

OpenFirmware

also known as OpenBoot, Found on Sun SPARC systems, IBM Power, PowerPC-based Apple Macintosh, IEEE 1275-1994... (wikipedia)

Coreboot (LinuxBIOS)

Can be used on some boards and tested under emulators - (wikipedia)

PMON2000

Found on the Lemote Yeeloong and embedded devices

Updating firmware

Firmware can be updated using various methods.

Open firmware

There are a number of projects creating various kinds of open firmware, including for booting, WiFi and audio.


CategoryPermalink | CategoryHardware | CategoryProprietarySoftware