FPGA computing with Debian and derivatives

FPGA (Field-programmable gate array) can be programmed to perform a particular computation in hardware. And since these arrays are huge, many such computations can be performed in parallel. This resembles the execution of code on the GPU, just that the GPU can other than the FPGA not be changed in its functionality.

The flexibility of FPGAs makes them come in various flavours. They usually come on PCI or USB-pluggable boards, or they occupy a CPU slot. And when on a separate board, they may have some extra intelligence with them, which may be capable of running Linux but the FPGA technology itself is completely OS agnostic. The FPGA itself typically features hundreds of I/O ports. A few are needed for e.g. a clock, and you want some communication to program it, and then you got quite an array of ports the control an amazing number of motors, switches or to read from a vast number of sensors. Basic control logic can be directly on the FPGA. Typical applications are in data acquisition, especially when the influx of data is so enormous that regular CPUs could not possibly cope or when a central processing unit wants to delegate lower level tasks. If the FPGA's sensory input is from a computer, the FPGA may act like a purpose-built co-processor to accelerate a computation.

FPGA vendors coming to mind first are Altera, ?Atmel, Lattice and Xilinx. When aiming at just getting some problem with FPGA solved with that machine attached to the net or to the USB port in a Debian compatible manner, there may be several options. The hardware section below lists a few.

FPGA and the DFSG

FPGA commonly take their "layout"/"program" from some memory local to the FPGA. The program executed on the FPGA then does not touch that configuration but moves data to it and reads the results. The code of the FPGA is prepared in some Hardware Description Language (HDL), where VHDL and Verilog are the ones seen most often. All would be fine if the tools to prepare the initial bitstream for the FPGA were Freely available. And for the better FPGA they are not even free as in beer. There are HDL emulators, but that is not fun. So, as a consequence, as of today we can have the bitstreams only in non-free and all tools relying on FPGA technologies only in contrib. A very recent exception is the Free toolchain for the smallest Lattice FPGAs.

There is a range of Open Hardware boards featuring FPGA now available. However, these still need the FPGAs themselves from the above mentioned chip manufacturer. And none of these officially endorse Open Source technologies to interact with their hardware. For some smaller, i.e. better understandable, chips some reverse engineered programming solution exists. This may be considered a DFSG-compliant solution. The largest community with the easiest to use tool chain may be for the small Lattice chips with. Our FPGA/Lattice page features a tiny tutorial and references to the community's reference designs to access the boards' features.

FPGA and the community

To employ FPGA technologies has enormous ecological advantages - the computation is so much faster with so little energy used for the acceleration. And the bitstreams produced are produced for the FPGA, in complete ignorance of the desktop operating system communicating for it. Hence - we should find ways to collaborate all across the Open Source landscape.

See also

Groups

Ports

Software

Cores

Hardware

Resources

Papers