Introduction

This page describes a method to install Debian on Apple Intel Mac Pro computers. It has been tested in two computer systems with a Quad-Core and dual Quad-core Xeon 5300-series "Clovertown" machines.

If you have already tried to install Debian on Intel Mac Pro, you may have experienced the fact that the Debian Installer CD boots and allows you to configure the early steps of installation, like language, keyboard, etc. but it doesn't mount the CD-ROM. Eventually, no media is available to continue with the base-system installation.

I tried the standard approaches given in several wikies on the subject, e.g. kernel boot parameters like,

boot: install noapic irqpoll acpi=force

and combinations thereof, but none really helped. I also tried a USB-key installation, only to learn that Apple Mac firmware does not support USB-key installations.

Short-short version

Download this [http://debian.calel.org/macpro/mini.iso Debian Installer Mini CD fot Intel Mac Pro] (md5sum 355637030cc685b1c37d037ee9ec926b), burn it in a CD, for example,

$ wodim -v -eject dev=/dev/cdrw -data mini.iso

Being a mini CD, it contains only .udeb packages, no .deb packages. You will need a network connection to install the base system. In the long version section I explain how I made this Debian Installer CD.

Under Mac OS X, install [http://refit.sourceforge.net/ rEFIt], the EFI boot menu for Intel Mac. Easiest is to download the Mac disk image, double click on the icon and run the installer.

Still under Mac OS X, open the CD bay, insert the Debian Installer Mini CD and reboot. In the boot menu choose the penguin.

Boot the installer in expert mode,

boot: expert

Install as you would in any system, except when partitioning the disk. Choose to partition manually, then set the bootable flag on the partition mounted in /. During the installation of the base system choose 'none' when selecting kernel to install. During GRUB installation, install GRUB in MBR (won't destroy rEFIt, nor any Mac partition).

After GRUB installation, just before finishing the installation and rebooting, open a virtual terminal, <ctrl>-<alt>-<f2> for instance, chroot /target, get the [http://debian.calel.org/macpro/linux-image-2.6.20-macpro-amd64_2.4.20_amd64.deb Custom Intel Mac Pro kernel image] and install it with 'dpkg -i'.

You may have to install initramfs-tools with,

# apt-get -f install initramfs-tools

before installing the kernel, depending on what software you installed.

'update-grub' just in case, then go back to the installation terminal, <ctrl>-<alt>-<f1> and finish the installation.

Long version