Use Stable branch instead of linus
use make olddefconfig instead of yes | make oldconfig, as it is more safe according to https://wiki.gentoo.org/wiki/Kernel/Configuration/en (also for me it worked better)
|Deletions are marked like this.||Additions are marked like this.|
|Line 122:||Line 122:|
|$ yes "" | make oldconfig||$ make olddefconfig|
On this page is described an easy way to debug Linux kernel issues, by using "git-bisect". The idea of this tool is to track down a particular issue (or regression) by selecting the faulty revision.
Before starting to bisect, it would be a good idea to use Debian's wayback machine to narrow down the range of Linux kernel versions where the faulty revision may occur so that the amount of compiling is reduced somewhat.
- Hibernation works under 2.6.25-rc6 but not anymore under 2.6.25-rc7 and I would like to know which revision caused the regression.
For these regression tests, you will need the following packages (to install with your favorite package manager):
git gitk kernel-package fakeroot
Alternatively, just install all the Linux kernel build-dependencies and git:
$ sudo apt install git $ sudo apt build-dep linux
At times the Linux kernel and the toolchain versions might be out of sync, resulting in lots of strange build failures. In that case, it would be a good idea to use a Debian stable chroot to do the building.
Getting the Linux git source
In this step, we will get a local copy of the whole Linux kernel source code by using Linux's distributed version control system: git.
Move to your source directory
$ cd ~/src
Clone Linus's version (HEAD)
This will download a lot of data and thus may need a lot of time.
$ git clone https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
Separate the wheat from the chaff
In this step, we will mark the versions good or bad.
Start the git-bisect process
$ git bisect start
Mark the ''good'' version
$ git bisect good v2.6.25-rc6
Mark the ''bad'' version
$ git bisect bad v2.6.25-rc7
At this point, this command should answer you something like that :
Bisecting: 182 revisions left to test after this [2c7871982cf27caaddbaeb7e2121ce1374b520ff] Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25
The interesting part is the number (in our case, 182) which is the number of Linux kernel revisions that lay between your good and your bad.
Build your Linux kernel
In this step, we will configure the future Linux kernel according to the actual configuration and then compile the new Linux kernel.
Copy a valid configuration
For example, the configuration of the running Linux kernel:
$ cp /boot/config-$(uname -r) .config
Put git commit IDs into versions
This ensures that you can easily map the installed Linux kernel images to a git commit ID. If you do not have much disk space on /boot you should either skip this step or be prepared during testing to remove some Linux kernel images that have already been tested.
$ scripts/config --enable LOCALVERSION_AUTO
Disabling debug information
If your bisect won't need to debug the kernel, it is a good idea to disable debug info to reduce the build time, especially for the linux-image-*-dbg package, which will be very large and can take a long time to compress.
$ scripts/config --disable DEBUG_INFO
Disable Secure Boot
If you are using a config from a Linux kernel from Debian or other distro kernel that has SecureBoot enabled using the distro key, then your builds will fail because you don't have a copy of the private distro key. First disable Secure Boot in your UEFI boot setup and then disable it in your Linux kernel config:
$ scripts/config --disable SYSTEM_TRUSTED_KEYRING $ scripts/config --set-str SYSTEM_TRUSTED_KEYS ''
Configure the Linux kernel
If you do not know the answer to each question, you can just accept the defaults:
$ make olddefconfig
If you want to customise the configuration, you can run this instead:
$ make oldconfig
If you want to reduce the build time to just what you need you can use this:
$ make localmodconfig
If you want are doing this for a remote host, copy the remote lsmod output locally and use this instead:
$ make LSMOD=$(pwd)/lsmod localmodconfig
Build the Linux kernel
This will take a lot of time and computation power too. Ensure your system is adequately cooled so it will not overheat.
# Detect the amount of CPU cores you have $ jobs=$(nproc --all) # Detect if the Linux kernel version needs fakeroot or not $ fakeroot=$(grep -q fakeroot scripts/package/Makefile || echo fakeroot) # Build Debian binary packages of the Linux kernel version $ $fakeroot make -j$jobs bindeb-pkg
Install the newly created Linux kernel
According to the name printed by the last command.
# apt install ../linux-2.6.25-rc6_2.6.25-rc6-2_amd64.deb
Reboot under newly built Linux kernel
Test your issue under this Linux kernel
If the feature you are testing works in the newly booted Linux kernel, mark the commit as good:
$ cd ~/src/linux $ git bisect good
If it does not work, mark the commit as bad:
$ cd ~/src/linux $ git bisect bad
These commands will then choose a new commit to be configured, built and tested. Repeat the procedure until git bisect decides one particular commit is at fault. Once the commit has been found you can inspect it to see why it caused the regression and or file a bug about it against the Debian Linux kernel package.