Differences between revisions 6 and 7
Revision 6 as of 2013-05-21 17:19:33
Size: 1084
Editor: GeoffSimmons
Comment: Drop pre-Squeeze workaround, state page language, fix typo.
Revision 7 as of 2013-05-22 01:26:26
Size: 1082
Editor: GeoffSimmons
Comment: Fix more typoes.
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
(If you were to late to pressing ESC however, you can still interact with the bootloader, so you can blindly configure the system to boot into a text install mode). (If you were too late pressing ESC however, you can still interact with the bootloader, so you can blindly configure the system to boot into a text install mode).
Line 13: Line 13:
This starts the default text-based installer, using regular VGA mode, disabling !FrameBuffer and redirecting the console to ttyS1, using 9600 baud and 1n8 stop/partiy/bits serial mode, which is iLO2's default. This starts the default text-based installer, using regular VGA mode, disabling !FrameBuffer and redirecting the console to ttyS1, using 9600 baud and 1n8 stop/parity/bits serial mode, which is iLO2's default.

Performing a remote install on an HP Proliant via the iLO text interface

Debian CDs will by default pop-up a graphical splash screen. Since this puts the system into a graphical mode, you will be unable to see the bootscreen via the iLO Serial-console interface (telnet/ssh). You can however get in a command line mode when pressing the ESC key when the screen displays the ISOLINUX loading message just after POST. (If you were too late pressing ESC however, you can still interact with the bootloader, so you can blindly configure the system to boot into a text install mode).

The correct command-line to run to get the default iLO serial console working is:

 install vga=normal fb=false console=tty0 console=ttyS1,9600n8

This starts the default text-based installer, using regular VGA mode, disabling FrameBuffer and redirecting the console to ttyS1, using 9600 baud and 1n8 stop/parity/bits serial mode, which is iLO2's default.