Differences between revisions 81 and 82
Revision 81 as of 2009-06-22 20:10:02
Size: 3116
Editor: ?LeRouge
Comment: Precision added for 2.6.30
Revision 82 as of 2009-09-12 10:00:00
Size: 2874
Editor: GeoffSimmons
Comment: DebianBug, DebianPkg. RT2860 is now mentioned in firmware-ralink's description.
Deletions are marked like this. Additions are marked like this.
Line 11: Line 11:
As of version 2.6.30, the non-free firmware has been moved out (see [[http://bugs.debian.org/521553|it contains non-free firmware]]). To get it working, [[http://packages.debian.org/sid/firmware-ralink|DebPkg: firmware-ralink]] must be installed (as of 20090622, apt-cache description does not mention the RT2860). Non-free section must be added to the APT source. As of version 2.6.30, the non-free firmware has been moved out (see DebianBug:521553). To get it working, DebianPkg:firmware-ralink must be installed. Non-free section must be added to the APT source.
Line 17: Line 17:

Starting with version 2.6.29, the Linux kernel contains the driver for the Ralink 2860; it's enabled and present in {{{linux-image-2.6.29-1-*}}}. However, [[http://bugs.debian.org/521553|it contains non-free firmware]], which will probably be moved to a non-free firmware package.
Starting with version 2.6.29, the Linux kernel contains the driver for the Ralink 2860; it's enabled and present in {{{linux-image-2.6.29-1-*}}}. However, it contains non-free firmware (DebianBug:521553).

This page summarizes the status of support for models 901, 1000 and 1000H. Please do not use it as a bug tracking system. Instead, file bugs and apply model-specific usertags as described on DebianEeePC/Bugs/About.

Please put no non-model specific information on this page. See DebianEeePC/HowTo/Configure for configuration of webcam, multiple displays, etc.

Sometimes confused with the 901GO which has a different wireless chipset.

Wifi

As of version 2.6.30, the non-free firmware has been moved out (see 521553). To get it working, firmware-ralink must be installed. Non-free section must be added to the APT source.

$ sudo aptitude install firmware-ralink

Starting with version 2.6.29, the Linux kernel contains the driver for the Ralink 2860; it's enabled and present in linux-image-2.6.29-1-*. However, it contains non-free firmware (521553).

With 2.6.28 and earlier, the recommended way to install the driver for these models is with the prebuilt module package from our repository:

aptitude install rt2860-modules-2.6.26-1-686

Alternatively, the module can be built and installed automatically with module-assistant, as follows:

m-a prepare
m-a a-i rt2860 

See DebianEeePC/HowTo/Wifi/Rt2860 and DebianEeePC/HowTo/Wifi for a guide to configuring wireless.

Hotkeys

If you want to see a message on your screen when you use a hotkey run aptitude install aosd-cat to install the OSD display'er. you then need to edit /etc/default/eeepc-acpi-scripts and change ENABLE_OSD='no' to ENABLE_OSD='yes'.

If you are not going to install the latest ALSA driver to get the front mic working you can change

VOLUME_LABEL='LineOut'
VOLUME_LABEL='iSpeaker'

to

VOLUME_LABEL='Master'
VOLUME_LABEL='Headphones'

(eeepc-acpi-scripts 1.0.12 will detect these automatically.)

See the section below about what to do if you are installing the latest ALSA modules.

Front Mic

Build and install the latest release candidate of ALSA as described in DebianEeePC/HowTo/Sound.

Touchpad

See DebianEeePC/HowTo/ElantechTouchpad.

Bluetooth

Bluetooth works fine with 2.6.29 and later. Older kernels need to be patched and may have a problem in that it must be enabled from the BIOS.

We recommend using 2.6.29 or newer. There is a backported 2.6.29 for lenny users; see our upgrade notes for details.

Power management

Install cpufrequtils to allow throttling (works like a charm with acpi_cpufreq).

With 2.6.30 and later, Super Hybrid Engine support is present; see our configuration page for information.