This page is suposed to become the instructions in how you can run Diskless workstations from a skolelinux3.0 installation. Diskless workstations are also marketed using the term "LowFat Clients" or "Halfthin Clients" or "stateless workstations".

A diskless workstation is similar to a thin client in that it boots from the network with pxe. But instead of running applications on the server and displaying them on the thin client screen with X. A diskless workstations mounts it's root file system from its next-server, and runs all applications on the local hardware. You can think about it like a regular workstation with a very long hard drive cable.


why not


  1. prerequisites
    • a regular skolelinux setup with tjener and preferably internet access
    • a fresh installed skolelinux terra/etch thin client server, that you want to run diskless workstations from (this server is promoted as "next-server" by tjener's dhcp)
    • combined server work fine (You must not edit pxelinux.cfg/default and in dhcpd.conf you must only enable your workstations).
    • swap on each diskless workstation is recommended. Schools has experienced that clients with 256 MB RAM freezes when swap is not enabled. Swap can be run on the server or on local hard drive
    • /!\ enough space on /opt? It need to be at least 3.5 GiB.

    • /!\ patience and enough time. The ltsp-make-client script downloads and installs the complete Debian Edu into your chroot

          lvextend --size +1G /dev/vg_system/opt 
          resize2fs /dev/vg_system/opt
  2. Edit /opt/ltsp/i386/etc/apt/sources.list.
    • Because the CDs and DVD is not signed, one need to use network APT sources.
    • Add the security repository.

deb http://ftp.skolelinux.org/debian/ etch main
deb http://ftp.skolelinux.org/skolelinux/ etch local
deb http://security.debian.org/ etch/updates main
  1. [optional] the next point is the breaking point of the operation. if it fails you have a semi broken chroot. so i usualy tar up the /opt/ltsp directories to make it easier to try the script several times.
  2. Then run the command /usr/sbin/ltsp-make-client This will adapt your chroot /opt/ltsp/i386 to diskless workstation, and install the packages needed for a workstation there. If it fails for some reason you can delete the broken chroot and restore the orginal from your tarfile and try again with sh -x /usr/sbin/ltsp-make-client to get a more verbose output. (run outside the chroot). /!\ This command downloads and installs a complete debian installation into your chroot, so it can take a very long time. /!\ you can only run this script once, if it breaks you must restore your tarfile or recreaet the chroot with ltsp-build-client.

  1. add nfsroot=/opt/ltsp/i386 to the end of the append line in /var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default

    • if you don't you'll get an error on the client about not being able to mount /var/lib
  2. edit your main dhcpd.conf file located on tjener.intern:/etc/dhcp3/dhcpd.conf, you'll need
    • a next-server line pointing to the server serving diskless workstation root. ie the ltsp-server where you ran ltsp-make-client
    • remember to restart the dhcp service
  3. Connect your diskless workstation to your workstation network
    • The same client can function as thinclient or diskless workstation, depending on where you connect it. for workstations, for thin clients.

This is setup in the file /opt/ltsp/i386/etc/init.d/ltsp_set_runlevel If you want your diskless workstation on the network, you may change this here

  1. boot your client.
    • if all went well you should be looking at the kdm login screen
  2. login and use your system
    • /!\ keep in mind your diskless workstations need to be added to your ldap netgroups, just like any other workstation. Otherways it wont be able to mount your HOME dir, and you won't be able to login.

example dhcpd.conf snippet

host static04 {
   hardware ethernet 00:00:00:00:00:00;
   fixed-address static04;
   filename "/var/lib/tftpboot/ltsp/i386/pxelinux.0";
   option root-path  "/opt/ltsp/i386";
   next-server ltspserver00;
   # next-server tjener; # for a combi server 

example /var/lib/tftpboot/pxelinux.cfg/default

DEFAULT vmlinuz ro initrd=initrd.img quiet splash root=/dev/nfs ip=dhcp  nfsroot=/opt/ltsp/i386

(you can only add a boot option for booting a locally installed operating system)

This configuration has been tested and found to work properly.

Resizeing network Swap

Network swap is turned on as default in Etch. But the size of it is rather small. If needed the size of it can be easely changed.

example /etc/ltsp/nbdswapd.conf


Using Local Swap

Sometimes it is preferable to use local swap partitions. This is easily done.

example /opt/ltsp/i386/etc/lts.conf


Upgrade Kernel

(is that still needed in etch? h01ger, 2007-07-20)

chroot /opt/ltsp/i386 
aptitude update
aptitude install linux-image-2.6.18-4-486

Then you must prepare the system to use the new kernel


Further Reading

Known Problems

With Skolelinux 3.0r0 auto mounting of CD-ROMs though KDE (via popup window) does not correctly. When selecting "Open in new Window" KDE will complain that the file system did not match. A fix is being worked on, until then use pmount:

pmount /dev/cdrom
pumount /dev/cdrom


These people have followed these instructions successfully: