Requirements

There are different ways of setting up a Skolelinux solution. It can be installed on just one standalone PC or a regional wide solution at many schools operated centrally. This variety of configurations makes a huge difference on how things are set up regarding network components, servers and client machines.

Hardware requirements

The purpose of the different profiles is explained in the network architecture chapter.

Hardware known to work

A list of tested hardware is provided from http://wiki.debian.org/DebianEdu/Hardware/ . This list is not nearly complete :)

http://wiki.debian.org/InstallingDebianOn is an effort to document how to install, configure and use Debian on some specific hardware. Therefore potential buyers would know if that hardware is supported and owner would know how get the best out of that hardware.

An excellent database about hardware supported by Debian is online at http://kmuto.jp/debian/hcl/.

Requirements for a network setup

Default Setup

When using the default network architecture, these rules apply:

Internet router

A router/gateway, connected to the internet on the external interface and running on the IP address 10.0.2.1 with netmask 255.255.254.0 on the internal interface, is needed to connect to the internet.

The router should not run a DHCP server, it can run a DNS server, though this is not needed and will not be used. (If the router runs a DHCP server you must disable the DHCP server on the main server and you will loose some features and certain documented procedures will work differently. So better disable the DHCP server on the router.)

If you are looking for a i386 based solution (so that you can reuse an old PC), we recommend IPCop or floppyfw.

If you need something for an embedded router or accesspoint we recommend using OpenWRT, though of course you can also use the original firmware. Using the original firmware is easier, using OpenWRT gives you more choices and control. Check the OpenWRT webpages for a list of supported hardware.

It is possible to use a different network setup, this is the documented procedure to do this. If you are not forced to do this by an existing network infrastructure, we recommend against doing so and recommend you stay with the default network architecture.

CategoryPermalink