Differences between revisions 16 and 17
Revision 16 as of 2021-10-04 10:54:25
Size: 8373
Editor: ?umlaeute
Comment: restructured by maintainer tasks
Revision 17 as of 2021-10-04 10:59:18
Size: 9096
Editor: ?umlaeute
Comment: note on Salsa-CI
Deletions are marked like this. Additions are marked like this.
Line 35: Line 35:

== Salsa CI ==

The [[https://salsa.debian.org/salsa-ci-team/pipeline|default Salsa-CI pipeline]] now includes a `test-crossbuild-arm64` job, that will attempt to cross-compile your package on the default '''amd64''' build architecture for the '''arm64''' host architecture.

So use this default pipeline to get automatic feedback whether your package is cross-compilable (or not).

NOTE: Currently the `test-crossbuild-arm64` job has the {{{allow_failure: true}}} property set, so even if the cross-build job fails, the entire pipeline will still be reported as '''success'''.
You can either manually check the status of each job of the pipeline, or override the property to `false` in your pipeline definition.

Guidelines for cross-build friendly packages

This page describes good (and bad) practice in packaging (and upstream code) with respect to cross-building Debian-based packages. Little of this is yet mandated by policy, but some is and more will be in the future.

There are often lots of ways of 'fixing' a cross-build problem, but unless you are an expert in the area it will not be clear what the implications of using one method over another are. This page endeavours to document standard guidelines so that packagers can use it as a reference, and Debian and derivatives can develop policy in this area.

Terminology

  • HOST is the machine we are building for

  • BUILD is the machine we are building on

  • (TARGET is only relevant for compilers and is the architecture that a compiler outputs code for. Unless packaging binutils, gcc or hurd, the target architecture is irrelevant.)

This somewhat confusing terminology is GNU's fault.

Principles

dpkg-architecture is responsible for translating between triplets, Debian architecture names and multiarch paths. This provides a consistent interface and namespace.

cross-building is defined as BUILD != HOST. more explicitly in debian.rules:

ifeq ($(DEB_BUILD_GNU_TYPE),$(DEB_HOST_GNU_TYPE))
  native build
else
  crossbuild
endif

We cannot run tests to determine aspects of the host machine which will be different on the build machine.

Classic cross-compiling assumes never running any host architecture binaries, and this remains good policy, but we often have QEMU or similar emulation available these days so it makes sense to control this separately where we can. In practice this means running tests, which should be controlled with DEB_BUILD_OPTS=nocheck rather than 'are we cross-compiling or not'. Cross-build tools will set 'nocheck' by default, but it can be enabled when appropriate.

When cross-building the build must select the correct tools who's output varies with architecture. This is usually done with an explicit GNU triplet prefix (arm-linux-gnueabi- ia64-linux-gnu-). This applies to the following tools: gcc, g++, binutils (ld, as, strip, ar, readelf etc), pkg-config

Salsa CI

The default Salsa-CI pipeline now includes a test-crossbuild-arm64 job, that will attempt to cross-compile your package on the default amd64 build architecture for the arm64 host architecture.

So use this default pipeline to get automatic feedback whether your package is cross-compilable (or not).

NOTE: Currently the test-crossbuild-arm64 job has the allow_failure: true property set, so even if the cross-build job fails, the entire pipeline will still be reported as success. You can either manually check the status of each job of the pipeline, or override the property to false in your pipeline definition.

Build environment

Various things need to be set in the environment for cross-builds to work correctly.

Below is a list of what is set by various tools, however the interface to package building is still defined as the debian rules targets and your rules file should not rely on any outside environment setting.

The recommended way to set the architecture variables provided by dpkg-architecture is to include this snippet provided by dpkg-dev:

include /usr/share/dpkg/architecture.mk

This is available from dpkg-dev 1.16.1 onwards, and will not overwrite any previously-supplied values.

Environment set by build tools

dpkg-buildpackage

all the dpkg-architecture variables:

DEB_BUILD_ARCH
DEB_BUILD_ARCH_OS
DEB_BUILD_ARCH_CPU
DEB_BUILD_ARCH_BITS
DEB_BUILD_ARCH_ENDIAN
DEB_BUILD_GNU_CPU
DEB_BUILD_GNU_SYSTEM
DEB_BUILD_GNU_TYPE
DEB_BUILD_MULTIARCH
DEB_HOST_ARCH
DEB_HOST_ARCH_OS
DEB_HOST_ARCH_CPU
DEB_HOST_ARCH_BITS
DEB_HOST_ARCH_ENDIAN
DEB_HOST_GNU_CPU
DEB_HOST_GNU_SYSTEM
DEB_HOST_GNU_TYPE
DEB_HOST_MULTIARCH

(it also sets some FAKEROOT stuff that we don't care about here, and sanitises a load of stuff out of your normal environment)

sbuild

sbuild uses dpkg-buildpackage so sets the same things as that, and:

CONFIG_SITE=/etc/dpkg-cross/cross-config.$DEB_HOST_ARCH  (for autoconf cache settings provided by dpkg-cross)
DEB_BUILD_OPTS+=nocheck

anything else configured to be set in build environment

pbuilder

pbuilder automatically adds nocheck to DEB_BUILD_OPTIONS and DEB_BUILD_PROFILES unless passing --no-auto-cross.

xdeb

xdeb uses dpkg-buildpackage so sets the same things as that, and:

CONFIG_SITE=/etc/dpkg-cross/cross-config.$DEB_HOST_ARCH  (for autoconf cache settings provided by dpkg-cross)
DEB_BUILD_OPTS+=nocheck
GTEST_INCLUDEDIR=/usr/$DEB_HOST_GNU_TYPE/include
GTEST_LIBDIR=/usr/$DEB_HOST_GNU_TYPE/lib

make

Make sets some things itself too. Some of them are not very helpfully, like the implicit $(CC)=cc

Dependencies

Perl extensions

Whenever building a Perl extension module (often called "xs" module), perl-xs-dev should be added to Build-Depends.

Python extensions

When building a Python extension, pythonSOMETHING-dev is often added to Build-Depends. For working with cross compilation, that should be replaced with libpythonSOMETHING-dev, pythonSOMETHING-dev:any.

Building

Setting correct compiler

Simply hardcoding 'gcc' will not allow cross-building, and is arguably wrong for other reasons (like using llvm/clang instead)

The easiest way to re-initialize common tool variables inside debian/rules is relying on dpkg:

include /usr/share/dpkg/buildtools.mk

Formerly, you could set CC manually:

CC=$(DEB_HOST_GNU_TYPE)-gcc

When dealing with makefile build systems, using dh_auto_build will automatically pass cross tools as command variables.

Unfortunately make always sets $(CC) (to 'cc') so you can't just test if it is already set, and set it if not.

This state can be detected with $(origin CC) see http://theory.uwinnipeg.ca/localfiles/infofiles/make/make_80.html

In the end, this can be done this way for instance:

DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)

ifeq ($(origin CC),default)
CC := $(DEB_HOST_GNU_TYPE)-gcc
endif

override_dh_auto_build:
    $(MAKE) CC=$(CC) build

Note: nowadays debhelper takes care of this, so these lines are usually not needed anymore.

This is a good way to set CC in a bash script: : "${CC:=gcc}"  which means if $CC is not aleady set, set it to 'gcc', otherwise use the existing value. The ':' is the 'null command' and stops the value being executed.

Running pre-build tests (configure tests)

Autoconf configure tests

autoconf will not do tests that need a program to be run when in 'cross-compiling' mode. To get the results that would be missing we can use the config.cache mechanism to supply pre-seeded answers. These can be architecture-specific answers, or generic 'Debian' answers. In rare cases you may need to change them for your own use-case.

These autoconf cache files are managed by the dpkg-cross package, which contains a set of files in /etc/dpkg-cross/ to pre-seed the answers. cross-config.<arch> contains the architecture-specific stuff (anything depending on size of variables, lengths of pointers, or peculiarities of this arch's glibc implementation). cross-config.cache contains the architecture-independent stuff.

All you need to do in your package to enable this mechanism and use the default settings is to set the environment variable CONFIG_SITE=/etc/dpkg-cross/cross-config.$DEB_HOST_ARCH e.g. /etc/dpkg-cross/cross-config.armel

If you need a special package-specific variable then you should set PACKAGE=<packagename> to match up with a stanza in one of the config files. This is to avoid clashes if two different packages need a variable set in a different way.

Running runtime tests (testsuite)

Running/skipping tests

Normally you don't want to run tests when cross-building.

set DEB_BUILD_OPTIONS=nocheck

However there are packages where the tests do make sense, and they can be done using qemu so the responsibility of packagers is just to honour this variable.

Where build profiles are enabled (DebianBootstrap) having a profile for 'check' is useful to annotate build-dependencies which are only needed for checks/tests.

Questions

* will the nocheck stuff ever be part of the build system, I think it should be, (maybe setting an additional variable if it does so), this way it would be smarter, for example if we use cross-build to orchestrate multilib, or building with qemu--and still run tests.--scientes