standardize page names
|Deletions are marked like this.||Additions are marked like this.|
|Line 1:||Line 1:|
|## page was renamed from ThetexttopdfFilter|
Getting the most out of the texttopdf filter used with CUPS on jessie, stretch and buster
Font Selection and fontconfig
Printing a text file requires at least one suitable font to be available on the system. Supported font formats are TrueType (TTF), OpenType (OTF) and TrueType Collection (TTC). The font should be monospaced.
Font selection is taken care of within the fontconfig framework, documented in fonts-conf, in conjunction with pdf.utf-8, which is found in /usr/share/cups/charsets and installed by the cups-filters package. By default, pdf.utf-8 is symlinked to pdf.utf-8.simple, whose essential content on Debian 8.x (jessie) is
charset utf8 0000 04FF ltor single FreeMono FreeMono:bold FreeMono:oblique FreeMono:bold:oblique 0500 05FF rtol single FreeMono
Note that the font names are not file names but selectors that enable fontconfig to choose a monopaced font. The font used for printing will always be FreeMono if fontconfig finds it on the system, but otherwise it will conduct a search based on the generic font group that Freemono belongs to. FreeMono belongs to the monospace group of fonts, so fontconfig will search for other fonts that are registered in this group and use the first match it finds.
On Debian 9.x (stretch) and Debian 10.x (buster) pdf.utf-8.simple has been changed to contain
charset utf8 0000 04FF ltor single monospace monospace:bold monospace:oblique monospace:bold:oblique 0500 05FF rtol single monospace
monospace is still a selector for fontconfig but the hard-coded request for FreeMono is changed to the generic monospace alias. fontconfig returns what it considers to be the best suitable monospaced font that is available on the system. This might be FreeMono or DejaVuSansMono or any other monospaced font. A preference for a particular font can be configured on a per-system basis by altering which file pdf.utf-8 links to (jessie, stretch and buster) or by means of a fontconfig configuration file (stretch and buster only). A user with a font preference is also catered for.
Altering the System-wide Default Font for Printing
fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont
All these four packages have a monospaced font. Consequently, there will always be one monospaced font on the system
As pdf.utf-8.simple is written on jessie, fontconfig will always select FreeMono if this font is installed. It will only fall back to one of DejaVuSansMono or LiberationMono or VeraMono if FreeMono is not available. To specify exactly what font to use, the file pdf.utf-8.defaultfont can be created to replace pdf.utf-8.simple and linked to pdf.utf-8. With the fonts-linuxlibertine package it would be sufficient to have pdf.utf-8.defaultfont as
charset utf8 0000 04FF ltor single /usr/share/fonts/opentype/linux-libertine/LinLibertine_M.otf
This bypasses fontconfig and also works on stretch and buster.
Substituting the stretch or buster pdf.utf-8.simple for the jessie version is also something to consider.
stretch and buster.
The preferred way of using a chosen textttopdf_font on stretch and buster would be to create /etc/fonts/local.conf with the contents
<?xml version='1.0'?> <!DOCTYPE fontconfig SYSTEM 'fonts.dtd'> <fontconfig> <alias> <family>monospace</family> <prefer> <family>textttopdf_font</family> </prefer> </alias> </fontconfig>
User Control of the Default Printing Font
Printing filters are always run as a non-privileged user, typically lp, with no connection to the user's desktop. On jessie, stretch and buster a text file is first processed by texttopdf to produce a PDF that is then sent to the pdftopdf filter. The PDF has the user-chosen font embedded in it.
Create the directory $HOME/charsets and the file pdf.utf-8 (examples below). Put pdf.utf-8 into $HOME/charsets. Convert the text file to a PDF with
CUPS_DATADIR=$HOME CHARSET=utf-8 /usr/lib/cups/filter/texttopdf 1 1 1 1 1 < text_file> > out.pdf
$CUPS_DATADIR would normally be /usr/share/cups/ but texttopdf will now look for the character set in a charsets directory in the home directory. Here are two example $HOME/charsets/pdf.utf-8 files that will override the hard-coded FreeMono font selection:
charset utf8 0000 04FF ltor single /usr/share/fonts/truetype/noto/NotoMono-Regular.ttf charset utf8 0000 04FF ltor single LiberationMono LiberationMono:bold LiberationMono:oblique LiberationMono:bold:oblique
stretch and buster.
Use the xml snippet above in $HOME/.config/fontconfig/fonts.conf. The user's fonts.conf will take precedence over the system's /etc/fonts/local.conf because texttopdf is being run by an ordinary user. Produce a PDF with
CHARSET=utf-8 /usr/lib/cups/filter/texttopdf 1 1 1 1 1 < text_file> > out.pdf
The two-step production of a PDF and sending it to the printing system can be automated with Tea4CUPS
The Case for FreeMono
The choice of a font for printing text files may very well be based on the look of the font. This is a reasonable criterion. However, there are other factors such as the range of glyphs in the font and, by implication, the language(s) used in the text.
GNU FreeMono has very good coverage of glyphs and caters for characters from many Unicode blocks. It can be compared with other monospaced fonts by altering the system font and producing and viewing a PDF of UTF-8-demo.txt using cupsfilter:
- Produce a PDF with
/usr/sbin/cupsfilter UTF-8-demo.txt > out.pdf
- Check the font used with
- View the PDF with
A Difference Between TrueType and OpenType Fonts When Printing
/usr/sbin/cupsfilter /etc/services > services.pdf
Find the size of services.pdf and run pdffonts to analyse the fonts it uses:
brian@jessie:~$ ls -l services.pdf -rw-r--r-- 1 brian brian 239047 Jun 9 16:35 services.pdf brian@jessie:~$ pdffonts services.pdf name type encoding emb sub uni object ID --------------- ------------ ---------- --------------------- SHXZNP+FreeMono CID TrueType Identity-H yes yes no 41 0
Remove fonts-freefont-ttf, replace it with fonts-freefont-otf and repeat.
brian@jessie:~$ ls -l services.pdf -rw-r--r-- 1 brian brian 755004 Jun 9 16:23 services.pdf brian@jessie:~$ pdffonts services.pdf name type encoding emb sub uni object ID ----------------------- ----------- ---------- --------------------- FreeMonoBold-Identity-H CID Type 0C Identity-H yes no no 40 0 FreeMono-Identity-H CID Type 0C Identity-H yes no no 45 0
The second file has the fonts embedded but not subset. In other words, the complete font has been included in the file produced by texttopdf. This results in a much larger file to be sent to the printer and might result in a longer printing time. This is not necessarily a problem but it is as well to be aware that using OTF is not yet equivalent to using TTF for the monospaced font.
Using texttpdf to Produce PDFs
The primary purpose of cups-filters is to process files (in conjunction with CUPS) to produce an end product of toner or ink being put on a medium such as paper. However, it didn't take long for people to realise the CUPS+cupsfilters combination gave a way of capturing a PDF file without sending it to a printer. This opens up a way of archiving text files and scripting batch production of PDFs from them using something that is probably on the system already.
The command to use has been given earlier. Please look again at both pdffonts outputs in that section and note that uni is no. This means there is no ToUnicode map in the PDF file and this in turn implies the text in the PDF is not searchable or capable of being copied. Should this does not matter to you then you have a decent method to produce a PDF from a text file with
/usr/sbin/cupsfilter input.txt > out.pdf
Should a searchable PDF matter
/usr/lib/cups/filter/texttopdf 1 1 1 1 1 input.txt > out.pdf
can be resorted to; out.pdf is searchable and copyable. However, pdffonts shows there are no fonts embedded in the PDF, so printing it would have to rely on whatever fonts the printer provides. The PDF should be viewable on any machine because the font is courier.
Alternatively, the PDF produced by cupsfilter or texttopdf can be post-processed with pdftocairo to obtain a searchable PDF with a chosen embedded font:
With the system text font.
/usr/sbin/cupsfilter input.txt | pdftocairo -pdf - out.pdf
With a user's text font on stretch and buster.
CHARSET=utf-8 /usr/lib/cups/filter/texttopdf 1 1 1 1 1 input.txt | pdftocairo -pdf - out.pdf
You might want to look at the Tea4cups page for ideas on creating a searchable PDF with chosen embedded fonts as part of the printing system workflow.
texttopdf handles a text file such as /etc/services by producing a PDF portrait page with the text parallel to the short edge. If either landscape or orientation-requested=4 is given as an option to texttopdf, the PDF is a landscape page and the text is placed parallel to the long edge. The second PDF is processed by pdftopdf to print correctly.
lp -d <queue> /etc/services lp -d <queue> -o landscape /etc/services +------------+ +----------------------+ |AAAAAAAAAAAA| |BBBBBBBBBBBBBBBBBBBBBB| | | | | | | | | | | +----------------------+ | | | | +------------+
The texttopdf filter is based on CUPS' texttops filter and written by Tobias Hoffmann <smilingthax SPAMFREE AT googlemail DOT com> under the auspices of the OpenPrinting group. Significant work has been done in bug #662660 and bug #663070 by Fabian Greffrath <fabian SPAMFREE AT debian DOT org> to integrate the use of fontconfig into the filter.