11169
Comment: add haskell-debian
|
11257
adjust table to dpkg behaviour
|
Deletions are marked like this. | Additions are marked like this. |
Line 80: | Line 80: |
* if the restriction list is empty, the build dependency is kept and processing stops | |
Line 97: | Line 98: |
|| `foo <profile.nocheck !profile.stage1>` ||<#00FF00> keep ||<#00FF00> keep ||<#FF0000> drop ||<#00FF00> keep || | || `foo <profile.nocheck !profile.stage1>` ||<#00FF00> keep ||<#FF0000> drop ||<#00FF00> keep ||<#00FF00> keep || |
Document status
Preliminary support of this spec was implemented in
package |
version |
bug |
vcs commit |
dpkg |
1.17.2 |
||
sbuild |
|
|
|
apt |
0.9.16.1 |
||
python-apt |
0.9.3.6 |
||
debhelper |
9.20140227 |
|
|
pbuilder |
|
|
|
lintian |
2.5.22 |
||
dose3 |
3.1 (partial) |
|
|
wanna-build |
|
|
|
dak |
|
|
|
devscripts (mk-build-deps) |
Uses libdpkg-perl so supports build profiles automatically |
||
python-debian |
|
|
|
libconfig-model-dpkg-perl |
|
|
|
augeas |
|
|
|
haskell-debian |
|
|
|
Problem description
For some compilation scenarios it is required to build-depend on a different set of binary packages than specified in the Build-Depends line. The two most important scenarios are:
Bootstrapping (for breaking build dependency cycles) and
- Cross building (for source packages having different build dependencies during cross building than during native building)
This specification describes two possible extensions of the Build-Depends field syntax. These extensions allow the marking of build dependencies as being needed or not needed when a specific build profile is activated. It also defines a new field called "Build-Profiles" which aids in marking binary packages as being built or not built whilst a certain build profile is activated or having been built with a certain set of build profiles activated.
Build profiles can be activated by setting the environment variable DEB_BUILD_PROFILES or by using the -P option with dpkg-buildpackage (or -o Apt::Build-Profiles for apt, or --profiles in sbuild). More than one build profile can be activated at a time. Multiple profiles are specified by separating them with commas in commandline arguments and by separating them with spaces in the DEB_BUILD_PROFILES environment variable. The initial profile names are "stage1", "stage2", "nocheck", "nobiarch" and "cross". Other possibilities are "nodoc" or "embedded".
Build-Depends syntax extension
An example demonstrating the build profile syntax:
Build-Depends: foo (>= 1.0) [i386 arm] <!profile.stage1 !profile.cross>, bar
This specification introduces a new pair of brackets (using < as the opening and > as the closing bracket) to be used after the architecture qualification list. Just as in the architecture qualification list the < and > brackets enclose a space separated list of terms called a restriction list.
Every term in the restriction list follows the following regular expression:
([a-z][a-z0-9-]*)\.([a-z][a-z0-9-]*)
The first group is called a namespace. The namespace "profile" is used to support build profiles and is the only allowed namespace for now. By introducing additional namespaces, this syntax can later be extended for other uses besides build profiles (for example an "arch" namespace can be introduced). No other namespace besides "profile" exists yet but it is forbidden to mix different namespaces within one restriction list. The second group is called a label and specifies the profile name.
Terms can be negated by using an exclamation mark as a prefix. In contrast to the architecture qualification list, positive and negative terms are allowed to be mixed. The semantics of a restriction list are computed as follows:
- one or more profiles can be activated at the same time (by commandline argument or environment variable)
- for each dependency, the restriction list is processed from left to right
- if the restriction list is empty, the build dependency is kept and processing stops
- if a negated term is encountered and the specified profile is set, the build dependency is dropped and processing of the list stops
- if a positive term is encountered and the specified profile is set, then the build dependency is kept and processing of the list stops
- if no profile is set for any term in the restriction list and at least one term in the restriction list is negated then keep the build dependency, otherwise drop the build dependency
Above rules express the same semantics as architecture restrictions if positive and negative terms are not mixed. If positive and negative terms are mixed (and only then) then the order of the terms in the restriction list matters. The following table illustrates the implication of the above rules. Each cell indicates whether or not the dependency foo is dropped with a certain value of DEB_BUILD_PROFILES.
|
"" |
"stage1" |
"nocheck" |
"stage1 nocheck" |
foo <!profile.stage1> |
keep |
drop |
keep |
drop |
foo <profile.stage1> |
drop |
keep |
drop |
keep |
foo <!profile.stage1 !profile.nocheck> |
keep |
drop |
drop |
drop |
foo <profile.stage1 profile.nocheck> |
drop |
keep |
keep |
keep |
foo <!profile.stage1 profile.nocheck> |
keep |
drop |
keep |
drop |
foo <profile.nocheck !profile.stage1> |
keep |
drop |
keep |
keep |
Future extensions
The syntax could be extended to allow more than one <> block
It could also be allowed to allow architecture names under the "arch" namespace within a <> block.
It could be allowed to mix different namespaces within a <> block
The Build-Profiles field
In debian/control binary package stanzas, the content of the Build-Profiles field specifies the (unordered) list of build profiles for which that binary package does or does not build. This list can either be all positive or all negative. Entries are negated by using an exclamation mark as a prefix.
Build-Profiles: !cross !stage1
If a binary package stanza in a debian/control file does not contain a Build-Profiles field, then it implicitly means that it builds with all build profiles.
The Built-For-Profiles field
In *.changes and Packages files, the content of the Built-For-Profiles field specifies the list of build profiles for which that binary or source package was built.
The DEB_BUILD_PROFILES environment variable
The DEB_BUILD_PROFILES environment variable contains a space separated unordered list of activated profiles. The content of this variable must be honored by all tools involved in package compilation. Here an example for debian/rules (enabling sql for any build except stage1 profile - notice the negated test):
ifneq ($(filter stage1,$(DEB_BUILD_PROFILES)),) DH_OPTIONS += -Nlibdb5.1-sql # not needed with debhelper (>= 9.20140227) CONFIGURE_SWITCHES += --disable-sql else CONFIGURE_SWITCHES += --enable-sql endif
Profile built binary packages
A binary package must offer the exact same functionality for all profiles with which it builds including no activated profile at all (if it builds in that case). Otherwise a package depending on that binary package might not find the functionality it expects it to provide. This means that if necessary binary packages have to be split or that a source package has to be built in two stages. This requirement can not technically be checked before ReproducibleBuilds happen.
Example
Imagine src:foo depends on bar which is needed to build a plugin that is shipped together with other plugins in the package foo-plugins. When bar is made optional as a build dependency of src:foo in a stage1 build, then the resulting stage1 binary package foo-plugins would differ from the foo-plugins package that is created during a full build. Thus the creation of the foo-plugins binary package must be disabled by using the Build-Profiles field in the foo-plugins binary package stanza and by adding the necessary bits to debian/rules for packages without debhelper or when build depending on debhelper (>> 9.20140227) is not desired.
If foo-plugins has reverse dependencies which are part of a cycle with src:foo itself, then not building foo-plugins would not solve the bootstrap problem. In that case it is necessary to either:
split the foo-plugins package into foo-plugins-nobar and foo-plugins-bar and adjust *all* reverse dependencies of foo-plugins to correctly depend on foo-plugins-nobar and foo-plugins-bar
or create a package foo-plugins-nobar during a stage1 build and modify only the reverse dependencies that are in a cycle with src:foo to build depend on foo-plugins-nobar in their own stage1 build. When src:foo is built fully, it will not produce foo-plugins-nobar anymore but the full foo-plugins package instead.
Other uses for the restriction syntax
Mark build dependencies that need to be translated when cross building
See CrossTranslatableBuildDeps#A3._Use_restriction_syntax_with_new_namespace
Replace Build-Depends-Indep and Build-Depends-Arch
Instead of moving build dependencies needed to build arch:all or arch:any packages into Build-Depends-Indep and Build-Depends-Arch, respectively, mark them directly in the Build-Depends field using <debbuildopt.archindep> and <debbuildopt.archdep>, respectively.
Map DEB_BUILD_OPTIONS to namespaces
Some DEB_BUILD_OPTIONS like nocheck or noopt could be mapped to <debbuildopt.nocheck> or <debbuildopt.noopt>. This would allow not needing to install certain dependencies if certain DEB_BUILD_OPTIONS are active.